-
128 X 64 Graphic LCD Display
₦ 5,500This 128 x 64 Graphic LCD Module allows you to easily display graphics and text on screen. The NT7108 controller is very popular and widely supported.
- Built-in controller (NT7108 or equivalent)
- +5V power supply
- 1/64 duty cycle
- Built-in negative voltage
- Compatible with KS0108B and KS0107B controller
Pinout
1 V Power supply for logic 2 V Ground 3 V Contrast Adjustment 4~11 DB0~DB7 Data bus line 12 CS1 Select Column 1~ Column 64 13 CS2 Select Column 65~ Column 128 14 /RST Controller reset signal, Active Low 15 R/W Read/Write select signal 16 D/I Data/ Instruction select signal 17 E Enable signal 18 V Negative Voltage Output 19 A Power supply for B/L + 20 K Power supply for B/L Qucik View -
16×2 LCD Module
₦ 3,00016X2 LCD Module with Blue backlight
-
- Easily controlled from any microcontroller
- 4/8 bit communication mode
- Special character mode
- Blue backlight
- HD44780 Controller
Qucik View -
-
20 X 4 LCD Module – Arduino Compatible
₦ 8,250This 20 X 4 LCD Module allows you to fit in a lot more text than you can on the smaller 16X4. It is however fully compatible. It has the industry standard HD44780 LCD controller.
-
- 20X4 Characters
- 5V Operating voltage
- Fully pin and code compatible with 16X2, 16X1 LCDs
- Backlight
Qucik View -
-
Dual USB Power Bank Board with LCD Display
₦ 2,500Dual USB battery charger with a built in LCD module for visual feedback
Features
-
- Micro USB input: 5V 1A
- USB Output: 5V 2.1A / 5V 1A(Dual USB interface)
- Charging display: LCD
- Batteries Type: Lithium-ion batteries (18650)
- Product Size: 57mm x 28mm
- Screen size:27mm x 17mm
Qucik View -
-
Graphic LCD 84×48 – Nokia 5110 – Arduino Compatible
₦ 6,000The Nokia 5110 is a basic graphic LCD screen for lots of applications. A much richer information set can be displayed on this screen.
It uses the PCD8544 controller, same used in the Nokia 3310 LCD. The PCD8544 is a low power CMOS LCD controller/driver, designed to drive a graphic display of 48 rows and 84 columns. All necessary functions for the display are provided in a single chip, including on-chip generation of LCD supply and bias voltages, resulting in a minimum of external components and low power consumption. The PCD8544 interfaces to microcontrollers through a serial bus interface.
There is an Arduino library and MikroC library
Qucik View -
HTC-1 Digital LCD Electronic Alarm Clock Hygrometer
₦ 5,500Description:
This HTC-1 meter can measure indoor temperature, humidity and time with reliable measurement results.
Max/min value measurement, clock alarm function, desk-top placing or wall hanging.
Widely used in indoor temperature and humidity measurement, apply to lab, cold chain transport, warehousing and other occasions.Features:
- Measuring humidity, temperature and time simultaneously, large LCD display, easy for reading.
- Memory of MAX & MIN measuring value,12-hour / 24-hour displaying system selectable.
- Temperature unit is switchable: C/F unit selectable.
- Clock alarm function, compact and light, convenient to carry,
- Desk-top placing or wall hanging, easy to use.
Specifications:
- Model:HTC-1
- Color: White
- Temperature range: Indoor &Outdoor -50~+70(-58~+158°F)
- Temperature Measuring Accuracy: ±1C / 1.8F
- Temperature Resolution: 0.1C / 0.2F
- Humidity Range: 10%RH ~ 99%RH
- Humidity Measuring Accuracy: ±5%RH
- Humidity Resolution: 1%
- Power supply:1.5Vf×1 (AAA size)
- Device dimension:10.2×9.3×2.1cm/4.02×3.66×0.83″
Package Information:
- Package Size:11 x 10 x 3.5cm / 4.3 x 3.9 x 1.4in
- Package Weight:88g / 3.1oz
Package List:
- 1 x Temperature Humidity Meter
- 1 x User Manual
Qucik View -
HTC-2 Digital LCD – Electronic Alarm Clock Hygrometer with Probe
₦ 7,500Description:
This HTC-2 meter can measure indoor temperature, humidity and time with reliable measurement results.
Max/min value measurement, clock alarm function, desk-top placing or wall hanging.
Widely used in indoor temperature and humidity measurement, apply to lab, cold chain transport, warehousing and other occasions.Features:
- Measuring humidity, temperature and time simultaneously, large LCD display, easy for reading.
- Memory of MAX & MIN measuring value,12-hour / 24-hour displaying system selectable.
- Temperature unit is switchable: C/F unit selectable.
- Clock alarm function, compact and light, convenient to carry,
- Desk-top placing or wall hanging, easy to use.
Specifications:
- Model:HTC-2
- Color: White
- Temperature range: Indoor &Outdoor -50~+70(-58~+158°F)
- Temperature Measuring Accuracy: ±1C / 1.8F
- Temperature Resolution: 0.1C / 0.2F
- Humidity Range: 10%RH ~ 99%RH
- Humidity Measuring Accuracy: ±5%RH
- Humidity Resolution: 1%
- Power supply:1.5Vf×1 (AAA size)
- Device dimension:10.2×9.3×2.1cm/4.02×3.66×0.83″
Package Information:
- Package Size:11 x 10 x 3.5cm / 4.3 x 3.9 x 1.4in
- Package Weight:88g / 3.1oz
Package List:
- 1 x Temperature Humidity Meter
- 1 x User Manual
Qucik View -
I2C LCD Module + 16×2 LCD
₦ 5,000The 16X2 LCD is the most popular LCD for displaying basic data out there, but it can take up as much as 12 I/O pins from your microcontroller. This kit combines the LCD with an I2C converter to ease connectivity and free up those valuable I/O pins. With I2C, only 2 I/O pins are used.
Features
- Arduino compatible I2C LCD module
- Software cotrolled backlight
- 16 X 2 LCD displays standard ASCII characters as well as special characters
- Widely available libraries for Arduino and other microcontroller architectures
- Example Arduino code at blog.nerdshed.com.ng
Kit Contains
- 16 X2 LCD
- I2C converter
Qucik View -
I2C LCD Module + 20×4 LCD
₦ 10,250Display more with the 20X4 LCD and conserve I/O pins with this kit. Alone, the LCD can take up as much as 12 I/O pins from your microcontroller. This kit combines the LCD with an I2C converter to ease connectivity and free up those valuable I/O pins. With I2C, only 2 I/O pins are used.
Features
- Arduino compatible I2C LCD module
- Software controlled backlight
- 20 X 4 LCD displays standard ASCII characters as well as special characters
- Widely available libraries for Arduino and other microcontroller architectures
- Example code at blog.nerdshed.com.ng
Kit Contains
- 20 X 4 LCD
- I2C converter
Qucik View -
Plastic Vernier Height & Depth Gauge Caliper- 0-150mm
₦ 8,500Product Description:
This product can measure the outer diameter, inner diameter, height, depth, etc.
Features:
Electronic digital caliper Made of hardened stainless steel Internal
external and height dimensions can be easily and accurately measured Linear capacitance measurement system Zero setting at any position Lock the jaws with a small locking thumb screw Basic measurement
Functions:
external, depth and step measurements.
easy-to-read LCD display Ideal for a wide range of industrial and automotive applications.
Qucik View -
TP101 Kitchen Liquid Temperature Pen
₦ 3,000Description:
Electronic digital display food thermometer Probe adopt import stainless steel security precision Weight: 0.1 KG/a A product listing: a thermometer, batteries, specification a Measuring range: water, food, liquid, paste, oil temperature, temperature milk, tea, soup, beer, etc
Features:
Temperature measurement:-50°C~+300°C(-58°F~572°F)
Temperature accuracy:±1°C/°F
Power – saving mode:10minutes auto power off function
Power Supply: 1.5V(AG13)×1Key (battery is not include)Scope: Liquids and food temperature
Features:
1.ON/OFF keys:switching
2.°C / °F Key : the display mode,this button can be °C / °F conversion function
3.HOLD key : temperature conditions in the display, press the LCD display can be maintained at HOLD state,then a measurement of the recovery temperature to detect when running HOLD function, LCD display HOLD meet
4.MAX/MIN key to view the maximum / minimumSpecification:
Color: Black
Length: 237mm
Net weight: 23g
Package weight:43.5g
Packing content:
1 x Digital thermometer (battery is not include) ,
1 x Instruction (with retail package)Qucik View