Only logged in customers who have purchased this product may leave a review.
USB to RS-485 Converter
₦ 1,500
The USB-RS-485 Converter allows you to interface and debug RS-485 devices from any terminal application or terminal application.
Features:
- No need external power, USB powered
- USB 2.0 plug and play compliant
- USB CH340 chip
- Support System: Windows XP , Vista, Windows 7 , Linux , MacOS , and WinCE5.0 support
- Supports baud rate range : 75bps – 115200bps , up to 6Mbps
- Communication distance :1200m(max)
2 in stock
Related Products
-
USB to UART 5- Pin CP2102 Module Serial Converter
₦ 2,500A MUST HAVE FOR EVERY ELECTRONICS AND EMBEDDED SYSTEMS ENGINEER
TALK DIRECTLY TO MICROCONTROLLERS, GSM MODULE, GPS MODULES, BLUETOOTH AND MANY MORE VIA UART/RS232
This is a USB 2.0 to 3.3V TTL UART 5 Pin CP 2102 Module Serial Converter
Connect MCU easily to your computer
Stable and reliable chip set CP2102 USB specifications
2.0 compliant with full-speed 12Mbps
Standard USB type A male and TTL 5 Pin connector
5 pins for TXD RXD GND 3.3V 5V.
All handshaking and modem interface signals.
Baud rate: 300bps to 1.5 Mbps.
Byte receive buffer: 640 byte transmit buffer.
Hardware or X-On/X-Off handshaking support.
Event character support Line break transmission.
USB suspend states supported via SUSPEND pins.
Temperature Range : -40 to + 85
Supports windows 98, Vista, Mac OS 9, Mac OS X & Linux 2.40
Qucik View -
Raspberry Pi Raspberry Pi HDMI To VGA Converter
₦ 4,800This is a high quality, high performance, convenient and compact HDMI to VGA conversion cable. It converts the digital HDMI video signals which are outputted from Raspberry Pi, into an analog signal required by the widely used VGA based computer displays still widely used around the world. It is a portable digital to analog adapter cable, converting standard HDMI input to VGA output. It is widely applicable where computer/DVD/digital set top box/laptop/a range of HD sources output’s digital signal but some display devices such as TV/monitor/projector doesn’t have digital input interface.
- Plug and play, no external power supply required
- The device handles display resolutions of up to 720p/1080i/1080p
- Standard HDMI male input
- VGA female output
- 99% high purity oxygen free copper wire core, gold plated terminals and gold plated plug
Compatible with Raspberry Pi Model A/B/B+
Product InformationBrandQucik View -
150W DC-DC Boost Converter – 10-32V to 12-35V
₦ 3,500The module is a non-isolated step-up module (BOOST)
- Dimensions: 65 * 56.5 * 23 (length * width * high) (mm)
- Input voltage :10-32V
- Output voltage: 12-35V (adjustable)
- Output Current: 6A (MAX)
- Input Current: 10A (MAX) (Please enhance heat dissipation if more than 10A)
- Output power: natural cooling 100W (MAX), enhance heat dissipation 150W (MAX)
- Conversion efficiency: 94% (measured at Input 16V, output 19V 2.5A)
- Output Ripple: 2% (MAX) 20M-bandwidth
- Operating Temperature: Industrial (-40c to +85c) (ambient temperature exceeds 40c, lower power use, or to enhance heat dissipation)
- Full load temperature rise: 45c
- No-load current: 25mA typical
- Voltage regulation: 0.5%
- Dynamic response speed: 5% 200uS
Applications:
-
- Easily power an laptop from a 12V battery
- Power 24V loads from a simple 12V battery
- Boost up solar power for more advanced applications
Qucik View -
High-Speed USB SPI Programmer – EZP2010
₦ 12,000This programmer can read and write the BIOS chips of a DVD,TV,etc
- USB 2.0 interface, the speed is 12Mbps.
- Auto detect chip modules.
- Auto select power voltage.
- Auto off-line chip copy.
- Software and firmware update.
- Support chip of 25 FLASH, 24 EEPROM, 25 EEPROM, 93 EEPROM, etc
Qucik View -
FT232 FTDI To TTL Serial Adapter
₦ 1,600A low-cost way to add USB capability to for Arduino or other microcontrollers. Use this for boot loading or uploading Arduino sketches with ease
- Can program Arduino mini, Pro Mini, Lily Pad and other Arduino devices without pinout.
- Working voltage: 3.3V/5V
- Chip: FT232RL
- Over current protection with 500 mA fuse
Qucik View -
CP2102 MICRO USB to UART TTL Module
₦ 1,5005A constant current LED driver and charger for lithium-ion battery
· 3.3V and 5V voltage output
· Supports baud rates from 300bps ~ 1Mbps
On-chip voltage regulator output voltage 3.3V
Supports data formats for 8 data bits, 1 stop bit and parity bits
Connotation 512 byte receive buffer and 512 byte transmit buffer
Support for hardware or X-ON / X-OFF handshakeQucik View
Reviews
There are no reviews yet.