2-Pin Power Cable₦ 600
This high quality two pin figure of 8 power cable is suitable for powering all kinds of devices from radio sets, amplifiers, rechargeable lamps, etc. Or you can just cut it up and use to power your own DIY projects.
- 1 m long
- High quality copper
- Industry standard connector
3V to 5V USB Output Charger Step up Power Module₦ 1,000
This module is used as a DC-DC booster, converting 3V to 5V. With the aid of this board, you can charge your mobile phones and power other kinds of USB devices from power sources with voltage as little as 1.5V such as batteries.
- Non-isolated step-up module (BOOST)
- Input voltage: 1-5V
- Output voltage: 5.1-5 .2 V
- Output Current: Rated 1A-1.5A
- Efficiency: Up to 96% (the higher the input voltage, the higher the efficiency)
- Switching frequency: 500KHz
- Output ripple: 30mV (MAX) 20M bandwidth (input 4V output 5.1V 1A)
- Voltage indication: LED lights with load (input voltage less than 2.7V LED indicator off)
- Operating Temperature: Industrial (-40°c to +85°c)
- Full load temperature rise: 30°c
- Quiescent Current: 130uA
- Load regulation: ± 1%
- Voltage regulation: ± 0.5%
- Dynamic response speed: 5% 200uS
- Short circuit protection: None (Please use the lithium battery with protection.)
5A DC-DC CC/CV Lithium Charger LED Driver Power Module₦ 2,500
This very utilitarian board delivers constant voltage or constant current output and comes in handy as a battery charger (Lead acid or Lithium battery), LED Constant current driver, as well as other power supply needs. It is also quite chunky -deliverying up to 5A output.
- Output voltage: 0.8V-30V
- Input voltage: 5V-32V
- Separately adjustable voltage and current outputs
- Size: 51 * 26.3 * 14 (L * W * H) (mm)
- Operating Temperature: -40 to +85 Degrees
- Voltage Regulation: +/-2.5%
- Load Regulation: +/- 0.5%
- Output ripple: 50mV
- Switching frequency: 300KHz
- Conversion efficiency: 95% (the highest)
- Output current: adjustable maximum 5A
Battery Parallel Charging Board Compatible with iMAX B6 Charger Adapter₦ 14,000
Charging board can charge four batteries simultaneously. When using B6 charger with charge plate at 4A current,it takes approx. 50 min to fully charge one battery, 85 mins for two batteries, and 200 mins for four batteries. Allows easy charging of drone and RC controlled device batteriesQucik View
iMAX B6 Lipro Multipurpose Battery Charger₦ 25,000
This multipurpose microprocessor controlled battery charger is able to safely charge LIon, LiPo, LiFe, NiCd, NiMH and Pb cells. So if you are looking to charge the battery on your drone, quadcopter, car or other project, this is the charger for you!
- Cell balancing Li-ion, LiPo and LiFe capable Ni-Cd and NiMH capable
- Large range of charge currents Store function, allows safe storage current
- Time limit function
- Input voltage monitoring. (Protects car batteries at the field)
- Data storage (Store up to 5 packs in memory)
- Battery break in and cycling.
- Support new generation system (LiFe) battery
TP4056 Lithium Ion/LiPo Battery Charger₦ 1,500
- Charge module- Linear charging.
- Current- 1A adjustable.
- Charge precision- 1.5%.
- Input voltage- 4.5V-5.5V.
- Full charge voltage- 4.2V.
- Led indicator- red is charging blue is full charged.
- Input interface- mini USB.
- Work temperature- -10 to +85.
- Inversed polarity- NO.