Only logged in customers who have purchased this product may leave a review.
I2C LCD Module + 16×2 LCD
I2C LCD Module + 16×2 LCD
₦ 5,000
The 16X2 LCD is the most popular LCD for displaying basic data out there, but it can take up as much as 12 I/O pins from your microcontroller. This kit combines the LCD with an I2C converter to ease connectivity and free up those valuable I/O pins. With I2C, only 2 I/O pins are used.
Features
- Arduino compatible I2C LCD module
- Software cotrolled backlight
- 16 X 2 LCD displays standard ASCII characters as well as special characters
- Widely available libraries for Arduino and other microcontroller architectures
- Example Arduino code at blog.nerdshed.com.ng
Kit Contains
- 16 X2 LCD
- I2C converter
Related Products
-
0 out of 5
MAX7219 Dot Matrix 4in1 Display Module
₦ 4,500Description:
MAX7219 Dot Matrix 4-in-1 Display Module is an integrated serial input/output common-cathode display driver, it connects the microprocessor 7-segment digital LED display with 8 digits, you can also connect a bar graph display or 64 independent LED. Thereon including a B-type BCD encoder chip, multi-channel scanning loop segment word driver, but also a static RAM 8 x 8 for storing each data. Only one external register is used to set the segment current of each LED.
Specifications and Features:-
- Dimensions: 128 x 32 x 1.5cm(LxWxH)(All 4 in 1)
- Dimension 32 x 32 x 1.5 cm (LxWxH) (Single Module)
- A single module can drive an 8×8 dot matrix common cathode
- Operating voltage: 5V
- Weight: 55 gm
- Fixing screws with 64 holes with a diameter 3mm
- Module with input and output interfaces
- Support for cascading multiple modules
Wiring Instructions:-
The left side of the module to the input port, the right to an output port.
When the control of a single module, simply input port connected to CPU
When a plurality of cascaded modules, input and output termination CPU, an input terminal of the second output end of the first module a module, the first two modules of the input terminal of the three termination modules, and so on..
Pin Description:-
- VCC 5V
- GND GND
- DIN P2.2
- CS P2.1
- CLK P2.0
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
USB Power Charging Current Voltage Tester
₦ 4,000This simple device can be used to operate or test servo motors. There are 3 modes to check servos;
- Manual mode: turn the knob
- Neutral mode: make the servo go back to the neutral point
- Automatic: window wiper mode: make the servo swing like a window wiper in the biggest angle. Push button to change between modes. Lights indicate mode.
You can connect 1-3 servos simultaneously. It can also be used to check the operation of any servo motor whether fitted or not.
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
4-Channel Relay Module
₦ 4,500The 4-channel relay module is able to switch up to 250A 10A and can be easily applied to home automation and control applications.
Uses:
- Supports all MCUs and Arduino Modules
- Easy connection
- Simple 5V Operation
- Very handy for home automation and control applications
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
I2C LCD Converter Module
₦ 2,000Description:-
I2C Module has a inbuilt PCF8574 I2C chip that converts I2C serial data to parallel data for the LCD display.
These modules are currently supplied with a default I2C address of either 0x27 or 0x3F. To determine which version you have check the black I2C adaptor board on the underside of the module. If there a 3 sets of pads labelled A0, A1, & A2 then the default address will be 0x3F. If there are no pads the default address will be 0x27.
The module has a contrast adjustment pot on the underside of the display. This may require adjusting for the screen to display text correctly.
Features:-
- Operating Voltage: 5V
- Backlight and Contrast is adjusted by potentiometer
- Serial I2C control of LCD display using PCF8574
- Come with 2 IIC interface, which can be connected by Dupont Line or IIC dedicated cable
- Compatible for 16×2 LCD
- This is another great IIC/I2C/TWI/SPI Serial Interface
- With this I2C interface module, you will be able to realize data display via only 2 wires.
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
XL4015 5A DC-DC Step Down Adjustable Supply Module with Display
₦ 3,500The XL4015 power supply delivers up to 5A to loads that need more current. The output voltage and current are fully adjustable. This module comes complete with heat sink and mounting screws.
Features
- Input voltage range: 5-36VDC
- Output voltage range:1.25-32VDC adjustable
- Output current: 0-5A
- Output power: 75W
- High efficiency up to 96%
- Built in thermal shutdown function
- Built in current limit function
- Built in output short protection function
- Input reverse polarity protection: None (if required, high current diode in series with the input).
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
Dual USB Voltage And Current Tester
₦ 8,250This simple device can be used to operate or test servo motors. There are 3 modes to check servos;
- Manual mode: turn the knob
- Neutral mode: make the servo go back to the neutral point
- Automatic: window wiper mode: make the servo swing like a window wiper in the biggest angle. Push button to change between modes. Lights indicate mode.
You can connect 1-3 servos simultaneously. It can also be used to check the operation of any servo motor whether fitted or not.
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View
Reviews
There are no reviews yet.