Only logged in customers who have purchased this product may leave a review.
128 X 64 Graphic LCD Display
₦ 5,500
This 128 x 64 Graphic LCD Module allows you to easily display graphics and text on screen. The NT7108 controller is very popular and widely supported.
- Built-in controller (NT7108 or equivalent)
- +5V power supply
- 1/64 duty cycle
- Built-in negative voltage
- Compatible with KS0108B and KS0107B controller
Pinout
| 1 | V | Power supply for logic |
| 2 | V | Ground |
| 3 | V | Contrast Adjustment |
| 4~11 | DB0~DB7 | Data bus line |
| 12 | CS1 | Select Column 1~ Column 64 |
| 13 | CS2 | Select Column 65~ Column 128 |
| 14 | /RST | Controller reset signal, Active Low |
| 15 | R/W | Read/Write select signal |
| 16 | D/I | Data/ Instruction select signal |
| 17 | E | Enable signal |
| 18 | V | Negative Voltage Output |
| 19 | A | Power supply for B/L + |
| 20 | K | Power supply for B/L |
Out of stock
Related Products
-
I2C LCD Converter Module
₦ 1,500Description:-
I2C Module has a inbuilt PCF8574 I2C chip that converts I2C serial data to parallel data for the LCD display.
These modules are currently supplied with a default I2C address of either 0x27 or 0x3F. To determine which version you have check the black I2C adaptor board on the underside of the module. If there a 3 sets of pads labelled A0, A1, & A2 then the default address will be 0x3F. If there are no pads the default address will be 0x27.
The module has a contrast adjustment pot on the underside of the display. This may require adjusting for the screen to display text correctly.
Features:-
- Operating Voltage: 5V
- Backlight and Contrast is adjusted by potentiometer
- Serial I2C control of LCD display using PCF8574
- Come with 2 IIC interface, which can be connected by Dupont Line or IIC dedicated cable
- Compatible for 16×2 LCD
- This is another great IIC/I2C/TWI/SPI Serial Interface
- With this I2C interface module, you will be able to realize data display via only 2 wires.
Qucik View -
I2C LCD Module + 20×4 LCD
₦ 7,000Display more with the 20X4 LCD and conserve I/O pins with this kit. Alone, the LCD can take up as much as 12 I/O pins from your microcontroller. This kit combines the LCD with an I2C converter to ease connectivity and free up those valuable I/O pins. With I2C, only 2 I/O pins are used.
Features
- Arduino compatible I2C LCD module
- Software controlled backlight
- 20 X 4 LCD displays standard ASCII characters as well as special characters
- Widely available libraries for Arduino and other microcontroller architectures
- Example code at blog.nerdshed.com.ng
Kit Contains
- 20 X 4 LCD
- I2C converter
Qucik View -
Raspberry Pi Screen
₦ 12,000Qucik View -
3.5mm Headphone Jack
₦ 1,000This is a 3.5mm headphone jack with standard 2.54mm header slots. All standard 3.5mm plugs for microphones or earpieces plug right in
Qucik View -
I2C LCD Module + 16×2 LCD
₦ 4,000The 16X2 LCD is the most popular LCD for displaying basic data out there, but it can take up as much as 12 I/O pins from your microcontroller. This kit combines the LCD with an I2C converter to ease connectivity and free up those valuable I/O pins. With I2C, only 2 I/O pins are used.
Features
- Arduino compatible I2C LCD module
- Software cotrolled backlight
- 16 X 2 LCD displays standard ASCII characters as well as special characters
- Widely available libraries for Arduino and other microcontroller architectures
- Example Arduino code at blog.nerdshed.com.ng
Kit Contains
- 16 X2 LCD
- I2C converter
Qucik View -
Graphic LCD 84×48 – Nokia 5110 – Arduino Compatible
₦ 5,000The Nokia 5110 is a basic graphic LCD screen for lots of applications. A much richer information set can be displayed on this screen.
It uses the PCD8544 controller, same used in the Nokia 3310 LCD. The PCD8544 is a low power CMOS LCD controller/driver, designed to drive a graphic display of 48 rows and 84 columns. All necessary functions for the display are provided in a single chip, including on-chip generation of LCD supply and bias voltages, resulting in a minimum of external components and low power consumption. The PCD8544 interfaces to microcontrollers through a serial bus interface.
There is an Arduino library and MikroC library
Qucik View
Reviews
There are no reviews yet.