This RS485 to TTL Module allows you to communicate to an RS-485 device, module or another microcontroller at over 1Mbps from over 1km away! This RS485 transciever can be easily interfaced to a microcontroller or Arduino

• Uses MAX485 integrated circuit
• Pinout  DI,DE,RE,RD signals
• 5 Volt Operation

Description:

This is a module that allows the TTL interface of the microcontroller to be transferred to the RS485 module. It is generally used for industrial automation. This module adds lightning protection design and anti-jamming design. When you use it in the field and carry out long distance transmission, you can Connect the GND end of the module to the ground so that lightning protection and anti-interference can be achieved.
It uses a standard 2.54 mm pitch design. If you want to make the second development will be more convenient. It has 120 ohm matching resistance, shorted R0 can, it is recommended that users in the long distance transmission shorted.
It supports communication between multiple microcontrollers, allowing up to 128 devices on the bus. It can be hot-swappable, in order to prevent signal interference, it carried out a large area of copper, the effect is very good.

Features:

• 3.3V perfectly compatible with 5.0V power supply
• 3.3V and 5.0V signal perfectly compatible
• Working temperature range: -40 C to + 85 C
• Transmission distance up to kilometers (with 850 meters of 2 * 1.5 cable to do the test, it is recommended to use in the 800 meters, more than 800 meters, please add repeaters)
• Semi-hole process design, the thickness of 0.8mm, makes it easy to use as a combo board, it can also be welded terminal use
• Has RXD, TXD signal lights to observe send and receive status

Specifications:

• Operating voltage: compatible with 3.3V and 5.0V
• Support baud rate: 110-256000bps
• Operating temperature: -40 Celsius to +85 Celsius
• Communication signal: compatible with 3.3V and 5.0V

Package Includes:

• 1 x TTL to RS485 Serial Converter Module