• 0 out of 5

    24MHz 8 Channel Logic Analyzer – Saleae Logic Compatible

     8,000

    A logic analyzer is a vital tool to any embedded systems or electronics engineer. It helps you see what is really going on as voltage logic levels change some uses are:

    • Protocol analysis (SPI, UART, I2C, proprietary protocols)
    • Microcontroller debugging (interrupts and debug without breakpoints)
    • Reverse engineering.
    • Data logging.
    • Performance tuning.

     

    Sampling rate up to: 24 MHz
    The logic for each channel sampling rate of 24M / s. General applications around 10M, enough to cope with a variety of occasions.

    8-channel:
    Logic eight inputs – can be collected at the same time they signal analysis, such as I2C, UART, sampling and analysis.

    10 billion samples:
    The logic can sample up to 100 100 million everything, so you capture even the most elusive events.

    Voltage range:
    0.8V logic: 5V voltage, to accept the 5.25 V standard CMOS threshold logic low. 2.0 V logic high. The input impedance is approximately 1 MΩ to see more specifications (10 pF)

    Qucik View
  • 0 out of 5

    3.3V-5V TXS0108E 8 Channel Bidirectional Logic Level Converter

     950

    This chip allow easy conversion between logic levels allowing easy interfacing of Modules or other integrated circuits to a microcontroller or Arduino system.

    • 1.2 V to 3.6 V on A Port and 1.65 to 5.5 V on B Port
    • Output Enable Function Using OE pin
    • VCCA connects to lower logic level eg 3.3V
    • VCCB connects to higher logic level eg 5V
    • When Ax has TTL 3.3V input, Bx will get TTL 5V output
    • When Bx has TTL 5V input, Ax will get TTL 3.3V output
    • NO direction control required

    Example applications are Arduino to GSM connections, 3.3V SPI/I2C module connection to 5V system, UART interfacing between systems operating at different voltages

    Qucik View
  • 0 out of 5

    4-Channel Relay Module

     2,200

    The 4-channel relay module is able to switch up to 250A 10A and can be easily applied to home automation and control applications.

    Uses:

    • Supports all MCUs and Arduino Modules
    • Easy connection
    • Simple 5V Operation
    • Very handy for home automation and control applications

     

    Qucik View
  • 0 out of 5

    5V 30A Single Channel Relay

     2,200

    This product is a 1-channel relay module board with LED indicators, It can be controlled by microcontrollers such as Arduino, AVR, PIC, ARM any other microcontroller operating at 5V.

    With this relay you can easily control electrical appliances, lights, etc.

    Features:

    • 5V Operation
    • The static current:5mA
    • Working current:190mA
    • Trigger current:2-4mA

     

    Module interface specifications:

      • DC+ : DC power supply positive pole
      • DC- :DC power supply negative pole
      • IN : signal triggering pin
      • JD+ : relay control voltage positive
      • JD- : relay control voltage negative
      • It is an 1-channel relay interface board, which can be controlled directly by a wide range of microcontrollers.
      • It is also able to control various appliances and other equipment with large current.
      • Relay output maximum contact is AC250V 10A and DC30V 10A.
      • Can be connected directly to microcontoller GPIO pins.
    • Working status indicator lights are conducive to the safe use.
    Qucik View
  • 0 out of 5

    5V DC 2 Channel Solid State Relay Module

     2,000

    This is a 5V solid state relay 240V 2A, able to control sizable loads.

    Features

      • High current relay, AC250V 10A, DC30V 10A
      • 2 LEDs to indicate when relays are on
      • Works with logic level signals from 3.3V or 5V devices
      • Opto-isolation circuitry
    • PCB size: 50×45 mm
    Qucik View
  • 0 out of 5

    8-Channel Digital Capacitive Switch Touch Sensor Module For Arduino – TTP226

     1,500

    A capacitive touch module which sends out signals on contact, it can be interfaced to an Arduino or any microcontroller. This module can be used to build all kinds of interesting projects from access control, home automation, automotive projects etc

    • Onboard TTP226 capacitive 8 keys touch sensor IC
    • Onboard 8 channel level status indicator
    • Working voltage: 2.4V-5.5V
    Qucik View
  • 0 out of 5

    Arduino Double Channel Relay Module 5V/10A

     1,600

    This product is a 2-channel relay module board with LED indicators, It can be controlled by microcontrollers such as Arduino, AVR, PIC, ARM any other microcontroller operating at 5V.

    With this relay you can easily control electrical appliances, lights, etc.

    Features

      • Opto-isolated input
      • This relay module is 5V active low.
      • It is an 1-channel relay interface board, which can be controlled directly by a wide range of microcontrollers.
      • It is also able to control various appliances and other equipment with large current.
      • Relay output maximum contact is AC250V 10A and DC30V 10A.
      • Can be connected directly to microcontoller GPIO pins.
    • Working status indicator lights are conducive to the safe use.
    Qucik View
  • 0 out of 5

    Arduino Single Channel Relay Module 5V/10A

     900

    This product is a 1-channel relay module board with LED indicators, It can be controlled by microcontrollers such as Arduino, AVR, PIC, ARM any other microcontroller operating at 5V.

    With this relay you can easily control electrical appliances, lights, etc.

    Features

      • Diode protected input
      • This relay module is 5V active low.
      • It is an 1-channel relay interface board, which can be controlled directly by a wide range of microcontrollers.
      • It is also able to control various appliances and other equipment with large current.
      • Relay output maximum contact is AC250V 10A and DC30V 10A.
      • Can be connected directly to microcontoller GPIO pins.
    • Working status indicator lights are conducive to the safe use.
    Qucik View
  • 0 out of 5

    Channel Digital Amplifier Board with Subwoofer Output

     5,500

    This stereo amplifier is allows you to easily deliver a powerful sound up to 200W! And all you need to do is connect a transformer.

     

    FEATURES

    • Output power:80W+80W
    • Output Impedance:4-8 Ohms
    • Frequency range:20Hz-30kHz
    • Microphone input
    • SNR:100dB
    • Number of channels:3 (left channel,right channel,subwoofer)

     

    • Product size: about 13.2*14.2*6.1cm/5.2* 5.6*2.4inch
    • Power Supply: AC +/-24V (>120w) ring transformer (Please use a high power transformer or DC power supply for best output.

     

    Qucik View