• 0 out of 5

    24MHz 8 Channel Logic Analyzer – Saleae Logic Compatible

     8,000

    A logic analyzer is a vital tool to any embedded systems or electronics engineer. It helps you see what is really going on as voltage logic levels change some uses are:

    • Protocol analysis (SPI, UART, I2C, proprietary protocols)
    • Microcontroller debugging (interrupts and debug without breakpoints)
    • Reverse engineering.
    • Data logging.
    • Performance tuning.

     

    Sampling rate up to: 24 MHz
    The logic for each channel sampling rate of 24M / s. General applications around 10M, enough to cope with a variety of occasions.

    8-channel:
    Logic eight inputs – can be collected at the same time they signal analysis, such as I2C, UART, sampling and analysis.

    10 billion samples:
    The logic can sample up to 100 100 million everything, so you capture even the most elusive events.

    Voltage range:
    0.8V logic: 5V voltage, to accept the 5.25 V standard CMOS threshold logic low. 2.0 V logic high. The input impedance is approximately 1 MΩ to see more specifications (10 pF)

    Qucik View
  • 0 out of 5

    Analog Voltmeter – 0-300V AC

     1,000

    This Analog voltmeter is perfect for getting readouts from power sources such as inverters, generator sets and mains.

     

    • Analog Voltage Meter
    • Scale Range : AC 0~300V
    • Accuracy:  +/- 5.0
    • Size : about 40mm x 40mm
    Qucik View
  • 0 out of 5

    Bosch BMP180 Barometer Pressure/Temperature/Altitude Sensor (Arduino Compatible)

     1,500

    The BMP180 is a precision barometric pressure, temperature and altitude sensor from manufactured by Bosch. It is fully compatible with BMP085 in terms of firmware/software/interfacing. BMP180 can easily be configured to work with Arduino, ARM or PIC over I2C.

    Specification

    • 3-5V Logic and Power
    • Pressure sensing range: 300-1100 hPa (9000m to -500m above sea level)
    • Up to 0.03hPa / 0.25m resolution
    • -40 to +85°C operational range, +-2°C temperature accuracy
    • This board/chip uses I2C 7-bit address 0x77.

     

    Arduino sample code: //www.haoyuelectronics.com/Attachment/GY-68/bmp085_arduino.zip

    Datasheet: //cdn-shop.adafruit.com/datasheets/BST-BMP180-DS000-09.pdf

     

     

    Product Information
    Brand

     

    Qucik View
  • 0 out of 5

    Digital AC Voltmeter – 70V to 500V

     2,500

    This LED Digital AC Voltmeter is capable of measuring 70VAC to 500VAC. Only two wires need to be connected and voltage can be safely displayed.

    Features

    • Power Supply: AC
    • Display Type:Digital 7 segment display
    • Displays up to 3 digits
    • Working temperature: -10 to 65C
    • Accuracy Class:1% (± 1 digit)
    • Measuring Range: 70-500V AC
    • Dimensions:48 x 29 x 20 m
    • Display: 0.56″
    • Current: 5-15mA

     

    Applications
    This voltmeter’s measuring range is AC70-500V It can be used in measuring AC110V 220V 380V.
    AC Voltage measurement in home office
    Can be used in power distribution box as voltage indicator
    Use in process monitoring for measure AC Input voltage to Motors, Actuators
    Measure voltage in a circuit

     

    Qucik View
  • 0 out of 5

    Digital Multimeter – DT9205A

     3,800
    Qucik View
  • 0 out of 5

    Electronic Soil Hygrometer

     1,500

    This device can be used to measure soil moisture electronically. It has both analog and digital outputs. Sensitivity adjustable the blue digital potentiometer.

    • 3.3V-5V Operating voltage
    • Two Indicator LEDs: Power (Red) Output (Green)
    • Mounting hole
    • Compatible with Arduino and PIC microcontrollers

    Four wire interface  pin description:

    1. VCC: .3 V-5V
    2. GND: GND
    3. DO: digital output interface (0 and 1)
    4. AO: Analog Output Interface

    Qucik View
  • 0 out of 5

    Flow Meter – 6L/Min

     4,500

    A device for measuring liquid flow rate, it is suitable for farm or agriculture projects, or supply and dispensing kind projects

    • Temperature: -25~+80 Celsius
    • Allowing pressure: pressure 1.75Mpa
    • Operating humidity range: 35%~90%
    • Use temperature: ≤ 80 Celsius
    • Load capacity: ≤ 10 mA (DC 5V)
    • Working voltage range: DC 5~18V
    • Maximum operating current: 15 mA (DC 5V)

     

     

    Qucik View
  • HTC-1 Digital LCD Electronic Alarm Clock Hygrometer
    0 out of 5

    HTC-1 Digital LCD Electronic Alarm Clock Hygrometer

     5,500

    Description:

    This HTC-1 meter can measure indoor temperature, humidity and time with reliable measurement results.
    Max/min value measurement, clock alarm function, desk-top placing or wall hanging.
    Widely used in indoor temperature and humidity measurement, apply to lab, cold chain transport, warehousing and other occasions.

    Features:

    • Measuring humidity, temperature and time simultaneously, large LCD display, easy for reading.
    • Memory of MAX & MIN measuring value,12-hour / 24-hour displaying system selectable.
    • Temperature unit is switchable: C/F unit selectable.
    • Clock alarm function, compact and light, convenient to carry,
    • Desk-top placing or wall hanging, easy to use.

    Specifications:

    • Model:HTC-1
    • Color: White
    • Temperature range: Indoor &Outdoor -50~+70(-58~+158°F)
    • Temperature Measuring Accuracy: ±1C / 1.8F
    • Temperature Resolution: 0.1C / 0.2F
    • Humidity Range: 10%RH ~ 99%RH
    • Humidity Measuring Accuracy: ±5%RH
    • Humidity Resolution: 1%
    • Power supply:1.5Vf×1 (AAA size)
    • Device dimension:10.2×9.3×2.1cm/4.02×3.66×0.83″

    Package Information:

    • Package Size:11 x 10 x 3.5cm / 4.3 x 3.9 x 1.4in
    • Package Weight:88g / 3.1oz

    Package List:

    • 1 x Temperature Humidity Meter
    • 1 x User Manual
    Qucik View
  • HTC-2 Digital LCD - Electronic Alarm Clock Hygrometer with Probe
    0 out of 5

    HTC-2 Digital LCD – Electronic Alarm Clock Hygrometer with Probe

     7,500

    Description:

    This HTC-2 meter can measure indoor temperature, humidity and time with reliable measurement results.
    Max/min value measurement, clock alarm function, desk-top placing or wall hanging.
    Widely used in indoor temperature and humidity measurement, apply to lab, cold chain transport, warehousing and other occasions.

    Features:

    • Measuring humidity, temperature and time simultaneously, large LCD display, easy for reading.
    • Memory of MAX & MIN measuring value,12-hour / 24-hour displaying system selectable.
    • Temperature unit is switchable: C/F unit selectable.
    • Clock alarm function, compact and light, convenient to carry,
    • Desk-top placing or wall hanging, easy to use.

    Specifications:

    • Model:HTC-2
    • Color: White
    • Temperature range: Indoor &Outdoor -50~+70(-58~+158°F)
    • Temperature Measuring Accuracy: ±1C / 1.8F
    • Temperature Resolution: 0.1C / 0.2F
    • Humidity Range: 10%RH ~ 99%RH
    • Humidity Measuring Accuracy: ±5%RH
    • Humidity Resolution: 1%
    • Power supply:1.5Vf×1 (AAA size)
    • Device dimension:10.2×9.3×2.1cm/4.02×3.66×0.83″

    Package Information:

    • Package Size:11 x 10 x 3.5cm / 4.3 x 3.9 x 1.4in
    • Package Weight:88g / 3.1oz

    Package List:

    • 1 x Temperature Humidity Meter
    • 1 x User Manual
    Qucik View
  • 0 out of 5

    Mini Digital LCD Thermometer

     3,000

    This simple digital thermometer is suitable for use in general temperature measurement at home or in the office and can be used with refrigerators, chillers, deep freezers.

    Qucik View
  • 0 out of 5

    Mini Digital LCD Thermometer With Probe

     3,000

    This simple digital thermometer is suitable for use in general temperature measurement at home or in the office and can be used with refrigerators, chillers, deep freezers.

    Qucik View
  • 0 out of 5

    Multimeter Probes

     3,000

    These multimeter probes are high quality replacement parts for digital or analogue multimeters. They are capable of measuring up to 20A

    They work on Fluke, Mastech, and other generic brands

     

    Qucik View