Only logged in customers who have purchased this product may leave a review.
Step-down Adjustable CC/CV Power Supply Module – LM2596 DC-DC
₦ 1,750
This LM2596 Module is perfect for LED driving and battery charging it is possible to regulate output current as well as voltage. Meanwhile, charge completion can be indicated by a designated LED light. Easily charge Lithium Ion and Lead Acid batteries with this module.
A low-cost high-amperage Switch mode DC/DC Buck supply with Constant Voltage (CV) and Constant Current (CC) output capability.
Get any voltage between 1.5V to 33V (Input voltage must be greater than output voltage)
Features
- Precision potentiometer for Output Voltage Adjustment
- Precision potentiometer Output Current Limit Adjustment
- LED indicator for Constant Current
Technical Specifications
- Input Voltage: 5-35V
- Maximum output current: 3A, (more than 15W with heat-sink).
- Output Voltage: Continuously adjustable from 1.5 V to 30V
- Module nature: Non isolated step-down constant current. Constant voltage module (CC CV).
- Efficiency: 92% (maximum 92% (the higher the voltage, the higher efficiency)
- Output ripple: 20M bandwidth (only for reference) Input 12V output 5V 3A 60mV (MAX)
- Working temperature: industrial grade (-40 ? to +85 ?)
- The no-load current: typical 10mA (12V 4.2V)
- Load regulation rate: + 1%
- Voltage regulation rate: 0.5%
- The dynamic response speed: 5% 200uS
- Dimensions: 48mm (L) *24mm(W) *11.4mm(high)
- Output short circuit protection by setting output current appropriately
Applications
- High power LED constant current drive.
- Lithium battery charging (including ferroelectric), 4V, 6V, 12V, 14V, 24V battery charge, NiCd and NiMH battery (batteries) charge, solar panels and wind generators.
- Solar Power Regulator. Can regulate varying PV input to any fixed voltage.
- Robot Power Supply for Digital Circuits (3.3V, 5V, or Adjustable ) and Motor Drivers
- DC CC/CV Experimental Power Supply with constant limit
4 in stock
Related Products
-
HC-05 Master-Slave Bluetooth Module
₦ 5,500This module can be set as a transmitter or receiver, transmitter can pair with receiver , receiver and receiver or transmitter and transmitter can’t communication between eachother, receiver can pair with computers and cell phone’s bluetooth.
1. It is HC-05.
2. Uses the CSR mainstream bluetooth chip, bluetooth V2.0 protocol standards.
3. Module working voltage 3.3 V.
4. Potter default rate of 9600, the user can be set up.
5. The core module size : 28 mm x 15 mm x 2.35 mm.
6. Working current: matching for 30 MA, matching the communication for 8 MA.
7. Dormancy current: no dormancy.
8. Used for GPS navigation system, water and electricity gas meter reading system.
9. With computer and bluetooth bluetooth adapter, PDA, seamless connection equipmentCommercial Series: Bluetooth module board Series
With LED indicator light, use 150mA and 3.3V regulation chip.
With VCC.GND.TXD.RXD foot for the Bluetooth
With “Re-seach” button(ON/OFF/WAKE foot for it , external MCU outinput “High level” can control module to re-seach)
Compatible with bluetooth master module”.slave module”or master-slave(whole) module.
Input voltage: 3.3~6V
Size: 1.55cm*3.98cm
Note:input power supply 3.3~6V, Prohibit more than 7V
No “Automatically prevent power supply peversing func”, so please correctly connect power supply
We advise to install “Bluetooth master module”
The “State” is output foot for LED status, when bluetooth “Unconnected”, output “Pulse” ; when bluetooth “connected”, output “High level”, we can determine the states from “MCU”
If only the board , No any “Bluetooth Function “Qucik View -
Dual USB Output 9V / 12V / 24V / 36V 5V DC-DC Power Supply Module
₦ 2,500This is a mini DC-DC step down voltage converter module with fixed 5V voltage output.
· Input: 6V-40V
· Output: 5V / 3A (MAX)
· Efficiency: 92% (MAX)
· Switching frequency: 150KHZ
· Working temperature: -40 ‘C – + 85 ‘C
Qucik View -
3V to 5V USB Output Charger Step up Power Module
₦ 1,000This module is used as a DC-DC booster, converting 3V to 5V. With the aid of this board, you can charge your mobile phones and power other kinds of USB devices from power sources with voltage as little as 1.5V such as batteries.
- Non-isolated step-up module (BOOST)
- Input voltage: 1-5V
- Output voltage: 5.1-5 .2 V
- Output Current: Rated 1A-1.5A
- Efficiency: Up to 96% (the higher the input voltage, the higher the efficiency)
- Switching frequency: 500KHz
- Output ripple: 30mV (MAX) 20M bandwidth (input 4V output 5.1V 1A)
- Voltage indication: LED lights with load (input voltage less than 2.7V LED indicator off)
- Operating Temperature: Industrial (-40°c to +85°c)
- Full load temperature rise: 30°c
- Quiescent Current: 130uA
- Load regulation: ± 1%
- Voltage regulation: ± 0.5%
- Dynamic response speed: 5% 200uS
- Short circuit protection: None (Please use the lithium battery with protection.)
Qucik View -
AT-09-BLE-Bluetooth-4-0-Module—HM-10-Compatible-6620015
₦ 5,000This Bluetooth 4.0 TTL transceiver module allows you to communicate with any gadget using the highly energy efficient Bluetooth 4.0 specification
Features
- Power input: 3.6V-6V DC(Can not higher than 6V)
- It’s easy to use and safely enclosed in a plastic sheath
- Bluetooth version: V4.0
- Default baud rate: 9600 (Adjustable baudrate)
- Default serial port setting: 9600, N, 8, 1
- Operates as slave or master.
- Ultra-low standby power consumption 90uA~400uA
- Coverage up to 60 meters
- Built in PCB antenna
- Size: 43mm x 15mm
Pinout- VCC: input power supply 3.3~6V, Prohibit more than 7V
- GND: Ground
- TX: transport
- RX: receive
- State: when bluetooth is connected , output “High level”, “no conntected” output “low level”
- en:when module is connected, give a high level to “EN”,the module will disconnected.
Qucik View -
12V Relay Module – 10A –Pair
₦ 1,500This 6V Relay allows your to control loads with up to 10A consumption
Features:
-
- 6V Coil
- Maximum Load DC: 24V (DC) @ 10A
- Maximum Load AC: 240V (AC) @ 10A
- Maximum turn-on time: 10ms
- Maximum turn-off time: 5ms
- Easy through hole mounting arrangement
Qucik View -
-
Arduino Buzzer Module
₦ 1,500This module allows you to produce a rich and loud sound from your microcontroller.
- 3.3 V to 5 V Operating Voltage
- 3V to 5V Control
- Works without the need of a separate transistor
- Mounting Hole
Pin Out
-
- VCC (3.3 V to 5 V)
- GND
- I/O Control
Qucik View
Reviews
There are no reviews yet.