Only logged in customers who have purchased this product may leave a review.
Power 3.3/5V Supply Module For MB 102 Breadboard
Power 3.3/5V Supply Module For MB 102 Breadboard
₦ 2,000
This MB-102 Breadboard power supply delivers 3.3V and 5V to serve most of you prototyping needs. Simply use the jumper cables to select the appropriate output voltage for your application. It has a power switch and it can be powered from a wall outlet or battery.
Related Products
-
0 out of 5
LM2596 Adjustable Step-Down Power Module With Digital Display
₦ 4,500This board carries the multipurpose LM2596 power supply and allows you deliver a regulated voltage for any electronic device without the need for soldering or a multimeter. Simply set it and hook it up. The module displays the output voltage on a built in seven segment display.
Features
- 4V-40V Input Voltage.
- Continuously adjustable output voltage range of 1.25V-37V .
- Maximum output current up to 3A
- Switch toggles between viewing output or input voltage.
- Clear Seven Segment display for showing operating voltages
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
4-Channel Relay Module
₦ 4,500The 4-channel relay module is able to switch up to 250A 10A and can be easily applied to home automation and control applications.
Uses:
- Supports all MCUs and Arduino Modules
- Easy connection
- Simple 5V Operation
- Very handy for home automation and control applications
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
HB100 Motion Detection Microwave Sensor Module
₦ 3,500This is a X-Band Bi-Static Doppler transceiver module. This module can be used to detect motion in projects relating to home automation, automatic doors, alarm systems and even vehicle speed detection.
Feature
Transmission frequency: 10.525 GHz
Frequency Setting Accuracy: 3MHz
Output power (minimum): 13dBm EIRP
Operating voltage: 5V 0.25V
Operating Current (CW): 60mA max., 37mA typical
harmonic emission: <-10dBm
Pulse mode:
Averagecurrent (5% DC): 2mA
Pulse Width (Min.): 5uSec
load cycles (Min.): 1%Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
HC-12 Wireless Serial Module Up to 1km
₦ 10,000Imagine a wireless UART port with a range of up to 1km. You are looking at it
Features
- Working voltage: 3.2V~5.5V
- Default address range: 1km
- Baud rate: 5000bps
- Default idle current: 16MA (In different working modes operating current is different)
- Module dimensions: 27.8 x 14.4 x 4mm
- Operating frequency range: 433.4-473.0MHz, up to 100 channels of communication
- The maximum transmit power: 100mW (settable)
- Default factory settings: Mode FU3, baud rate is 9600bps, communication channels CH001 (433.4M)
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
AT-09-BLE-Bluetooth-4-0-Module—HM-10-Compatible-6620015
₦ 10,000This Bluetooth 4.0 TTL transceiver module allows you to communicate with any gadget using the highly energy efficient Bluetooth 4.0 specification
Features
- Power input: 3.6V-6V DC(Can not higher than 6V)
- It’s easy to use and safely enclosed in a plastic sheath
- Bluetooth version: V4.0
- Default baud rate: 9600 (Adjustable baudrate)
- Default serial port setting: 9600, N, 8, 1
- Operates as slave or master.
- Ultra-low standby power consumption 90uA~400uA
- Coverage up to 60 meters
- Built in PCB antenna
- Size: 43mm x 15mm
Pinout- VCC: input power supply 3.3~6V, Prohibit more than 7V
- GND: Ground
- TX: transport
- RX: receive
- State: when bluetooth is connected , output “High level”, “no conntected” output “low level”
- en:when module is connected, give a high level to “EN”,the module will disconnected.
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
Arduino Buzzer Module
₦ 1,500This module allows you to produce a rich and loud sound from your microcontroller.
- 3.3 V to 5 V Operating Voltage
- 3V to 5V Control
- Works without the need of a separate transistor
- Mounting Hole
Pin Out
-
- VCC (3.3 V to 5 V)
- GND
- I/O Control
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View
Reviews
There are no reviews yet.