• 0 out of 5

    20 X 4 LCD Module – Arduino Compatible

     4,000

    This 20 X 4 LCD Module allows you to fit in a lot more text than you can on the smaller 16X4. It is however fully compatible. It has the industry standard HD44780 LCD controller.

      • 20X4 Characters
      • 5V Operating voltage
      • Fully pin and code compatible with 16X2, 16X1 LCDs
    • Backlight
    Qucik View
  • 0 out of 5

    24MHz 8 Channel Logic Analyzer – Saleae Logic Compatible

     8,000

    A logic analyzer is a vital tool to any embedded systems or electronics engineer. It helps you see what is really going on as voltage logic levels change some uses are:

    • Protocol analysis (SPI, UART, I2C, proprietary protocols)
    • Microcontroller debugging (interrupts and debug without breakpoints)
    • Reverse engineering.
    • Data logging.
    • Performance tuning.

     

    Sampling rate up to: 24 MHz
    The logic for each channel sampling rate of 24M / s. General applications around 10M, enough to cope with a variety of occasions.

    8-channel:
    Logic eight inputs – can be collected at the same time they signal analysis, such as I2C, UART, sampling and analysis.

    10 billion samples:
    The logic can sample up to 100 100 million everything, so you capture even the most elusive events.

    Voltage range:
    0.8V logic: 5V voltage, to accept the 5.25 V standard CMOS threshold logic low. 2.0 V logic high. The input impedance is approximately 1 MΩ to see more specifications (10 pF)

    Qucik View
  • 0 out of 5

    4 Channels Wireless Remote Control 315MHz -Arduino Compatible

     3,000
    • Communicate with Arduino over long distances
    • 315MHz operating frequency
    • Distance: approx. 50 Meters in open air
    • 5V operation
    • 4 Control channels
    Qucik View
  • 0 out of 5

    AT-09-BLE-Bluetooth-4-0-Module—HM-10-Compatible-6620015

     4,500

    This Bluetooth 4.0 TTL transceiver module allows you to communicate with any gadget using the highly energy efficient Bluetooth 4.0 specification

    Features

    • Power input: 3.6V-6V DC(Can not higher than 6V)
    • It’s easy to use and safely enclosed in a plastic sheath
    • Bluetooth version: V4.0
    • Default baud rate: 9600 (Adjustable baudrate)
    • Default serial port setting: 9600, N, 8, 1
    • Operates as slave or master.
    • Ultra-low standby power consumption 90uA~400uA
    • Coverage up to 60 meters
    • Built in PCB antenna
    • Size: 43mm x 15mm
    Pinout
    • VCC: input power supply 3.3~6V, Prohibit more than 7V
    • GND: Ground
    • TX: transport
    • RX: receive
    • State: when bluetooth is connected , output “High level”, “no conntected” output “low level”
    • en:when module is connected, give a high level to “EN”,the module will disconnected.
    Qucik View
  • 0 out of 5

    Bosch BMP180 Barometer Pressure/Temperature/Altitude Sensor (Arduino Compatible)

     2,800

    The BMP180 is a precision barometric pressure, temperature and altitude sensor from manufactured by Bosch. It is fully compatible with BMP085 in terms of firmware/software/interfacing. BMP180 can easily be configured to work with Arduino, ARM or PIC over I2C.

    Specification

    • 3-5V Logic and Power
    • Pressure sensing range: 300-1100 hPa (9000m to -500m above sea level)
    • Up to 0.03hPa / 0.25m resolution
    • -40 to +85°C operational range, +-2°C temperature accuracy
    • This board/chip uses I2C 7-bit address 0x77.

     

    Arduino sample code: //www.haoyuelectronics.com/Attachment/GY-68/bmp085_arduino.zip

    Datasheet: //cdn-shop.adafruit.com/datasheets/BST-BMP180-DS000-09.pdf

     

     

    Product Information
    Brand

     

    Qucik View
  • 0 out of 5

    DS18B20 Waterproof Temperature Sensor – Arduino Compatible

     3,000

    The DS18B20 allows you take temperature readings in water or oils within its specified temperature range.

    DS18B20 Technical specs:

    • Usable temperature range: -55 to 125°C (-67°F to +257°F)
    • 9 to 12 bit selectable resolution
    • Uses 1-Wire interface- requires only one digital pin for communication
    • Unique 64 bit ID burned into chip
    • Multiple sensors can share one pin
    • ±0.5°C Accuracy from -10°C to +85°C
    • Temperature-limit alarm system
    • Query time is less than 750ms
    • Usable with 3.0V to 5.5V power/data

    Work with Arduino IDE on ESP8266 Wifi module to take temperature readings over the Internet: //iot-playground.com/blog/2-uncategorised/41-esp8266-ds18b20-temperature-sensor-arduino-ide

     

    Qucik View
  • 0 out of 5

    Graphic LCD 84×48 – Nokia 5110 – Arduino Compatible

     3,000

    The Nokia 5110 is a basic graphic LCD screen for lots of applications. A much richer information set can be displayed on this screen.

    It uses the PCD8544 controller, same used in the Nokia 3310 LCD. The PCD8544 is a low power CMOS LCD controller/driver, designed to drive a graphic display of 48 rows and 84 columns. All necessary functions for the display are provided in a single chip, including on-chip generation of LCD supply and bias voltages, resulting in a minimum of external components and low power consumption. The PCD8544 interfaces to microcontrollers through a serial bus interface.

    There is an Arduino library and MikroC library

    Qucik View
  • 0 out of 5

    KY-031 Percussion Knock Sensor – Arduino Compatible

     2,000

    This module is a knock sensor. It sends out signals which can be read with a microcontroller like Arduino. It is suitable for building projects like electronic drums, and sensing other kinds of vibration. It can be used in anti-theft projects and noise detection systems.

     

    • Working voltage: 5V
    • 3 Pinout: 5V, GND, Vout
    • Size: 30*20mm
    • Weight: 3g

     

    Qucik View
  • 0 out of 5

    Micro SD Storage Board – Arduino Compatible

     2,200

    This Micro SD card Adapter easibly adds Gigabytes of storage to your microcontroller project. Read and write from SD & SDHC cards via a microcontroller or Arduino board.

    • Support Micro SD SDHC Card
    • Power supply:4.5V – 5.5V, 3.3V voltage regulator circuit board
    • Positioning holes: 4 M2 screws for mounting
    • Control Interface: GND, VCC, MISO, MOSI, SCK, CS

     

    Qucik View
  • 0 out of 5

    MQ-2 Combustible Gas Sensor – Arduino Compatible

     3,000

    This sensor allows you to detect combustible gases in the air. It is capable of detecting flamable gases in concentrations ranging from 300 to 10,000 ppm using only one analog pin from a microcontroller.

    5V Operation
    Detects any of the following flammable gases

    • LPG
    • Butane
    • Propane
    • Methane
    • Alcohol
    • Hydrogen
    • Smoke

    Example Application: Fire prevention system, Gas leakage detector, Gas concentration detector.

     

    Qucik View
  • 0 out of 5

    MQ-3 – Alcohol Gas Sensor – Arduino Compatible

     3,000

    This sensor allows you to detect alcohol concentration levels. Use only one analog pin to microcontroller for detection

    • 5V Operation
    • Highly sensitive to alcohol
    • Fast response time

    Example Application: Breathalyzer,Alcohol concentration detector.

    Qucik View
  • 0 out of 5

    MQ-5 Methane, LPG, Alcohol & Smoke Sensor – Arduino Compatible

     2,500

    This sensor allows you to detect combustible gases in the air. It is capable of detecting flamable gases in concentrations ranging from 200-10000ppm using only one analog pin from a microcontroller.

    • 5V Operation
    • Detects any of the following flammable gases
      • Highly sensitive to LPG and Natural Gas
      • Sensitive to Alcohol
      • Cooking and Cigarette Smoke

    Example Application: Fire prevention system, Gas leakage detector, Gas concentration detector.

     

    Qucik View