Only logged in customers who have purchased this product may leave a review.
RFID Kit – 13MHz RC522

RFID Kit – 13MHz RC522
₦ 3,500
RC522 is a 13.56 MHz RFID reader writer module which easy to use and low cost. It can be easily hooked up to Arduino or other microcontroller (e.g. PIC, Atmel or ARM) via SPI. This kit comes with two tags so you can begin prototyping right away.
Useful for making access control for locks, vehicle anti-theft, attendance systems, etc.
The RC522 has full support for Arduino: //playground.arduino.cc/Learning/MFRC522
- Operating current :13-26mA/DC 3.3V
- Idle current :10-13mA/DC 3.3V
- SPI communication (Industry standard)
- Sleep current: less than 80uA
- Peak current: less than 30mA
- Operating Frequency: 13.56MHz
Related Products
-
0 out of 5
HC-12 Wireless Serial Module Up to 1km
₦ 10,000Imagine a wireless UART port with a range of up to 1km. You are looking at it
Features
- Working voltage: 3.2V~5.5V
- Default address range: 1km
- Baud rate: 5000bps
- Default idle current: 16MA (In different working modes operating current is different)
- Module dimensions: 27.8 x 14.4 x 4mm
- Operating frequency range: 433.4-473.0MHz, up to 100 channels of communication
- The maximum transmit power: 100mW (settable)
- Default factory settings: Mode FU3, baud rate is 9600bps, communication channels CH001 (433.4M)
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
A9G GSM/GPRS GPS/DBS Module
₦ 15,000The A9G module is a multi-function development board based on the Ai-Thinker A9G GPRS/GSM+GPS/BDS module, The A9G is ideal for IoT applications especially battery powered ones since it has Lithium-Ion battery charge management on board.
Specification
- Quad band-GSM/GPRS 800/900 / 1800 / 1900MHz
- Integrated Power Management Unit: Lithium battery charge management, integrated DC-DC and LDOs.
- 29 GPIO Pins.
- Standard AT-Command interface
- Can be powered via USB
- GPS/BDS dual-mode positioning function.
- Microphone and speaker interfaces.
- USB communication interface.
- Multiple user buttons.
- TF card slot.
- Acceleration sensor.
- SPI, I2C2, ADC interface.
Applications
Possible product applications: GPS trackers, IoT Data Interface, GSM Modem SMS based application.
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
PN532 NFC and RFID Reader & Writer Module
₦ 6,000The PN532 is a widely used and supported NFC chip. This module will allow you to add NFC and RFID functionality to your project, allowing you to interact with phones, read and write NFC tags and RFID tags.
Features
- Typical Operating Distance have been updated to 5cm~7cm reading distance
- Work in NFC Mode or RFID reader/writer Mode
- RFID reader/writer supports:
- Mifare 1k, 4k, Ultralight, and DesFire cards
- ISO/IEC 14443-4 cards such as CD97BX, CD light, Desfire, P5CN072 (SMX)
- Innovision Jewel cards such as IRT5001 card
- FeliCa cards such as RCS_860 and RCS_854
- Plug and play, Arduino compatible
- Built in PCB Antenna, with 4cm~6cm communication distance
- On-board level shifter, Standard 5V TTL for I2C and UART, 3.3V TTL SPI
- Work as RFID reader/writer
- Work as 1443-A card or a virtual card
- Exchange data with other NFC devices such as smartphone
Package contains
- 1 PN532 NFC RFID Module
- 1 dupont cable Male-Male
- 1 Mifare S50 White Card
- 1 Mifare One S50 Key Ring
- 1 12P bent header pin
Arduino Library: //github.com/adafruit/Adafruit-PN532
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
NRF 240LO1+ 2.4GHz Wireless Transciever
₦ 1,500- Capable of up to 2Mbps communication
- 1.9 to 3.6V Operating Voltage
- Low – Power Features 400nASleep mode current consumption
- Fast start up time: 240us from SLEEP to RX or TX mode
- 1.9 to 3.6V Operating Voltage
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
4 Channels Wireless Remote Control 315MHz -Arduino Compatible
₦ 4,000Communicate with Arduino over long distances
- 315MHz operating frequency
- Distance: approx. 50 Meters in open air
- 5V operation
- 4 Control channels
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
USB To ESP8266 Serial Wireless Wi-Fi Module Adapter Board
₦ 2,500This USB ESP8266 adapter board which can be plugged directly to your computer allowing communication, testing and programming to be done on the module with ease.
· CH340 serial chip
· 3225 chip crystal, to enhance the stability of the serial port
Fully compatible with Windows, Mac and Linux systems
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View
Reviews
There are no reviews yet.