Raspberry Pi Camera
₦ 10,000
This Raspberry Pi Camera Module plugs directly into the Raspberry Pi board. Allowing crystal clear 5 Mega Pixel Images to be taken, or 1080p HD Videos to be recorded.
Features
- Fully Compatible with Both the Model A and Model B Raspberry Pi
- 5MP Omnivision OV5647 Camera Module
- Still Picture Resolution: 2592 x 1944
- Video: Supports 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 Recording
- 15-pin MIPI Camera Serial Interface – Plugs Directly into the Raspberry Pi Board
- Size: 20 x 25 x 9mm
- Weight 3g
- Fully Compatible with many Raspberry Pi cases
1 in stock
Only logged in customers who have purchased this product may leave a review.
General Inquiries
There are no inquiries yet.
Related Products
-
DHT-11 TEMPERATURE SENSOR
₦ 1,000Quick ViewThe DHT11 is a low-cost and reliable digital temperature and humidity sensor. Digital output only. It is compatible with Arduino complete with library as well as other microcontrollers.
- 3 to 5V Operating range
- 2.5mA (max)
- 20-80% humidity readings (up to 5% accuracy)
- 0-50°C temperature readings (up to ±2°C accuracy)
- 1 Hz Maximum sampling rate
- 15.5mm x 12mm x 5.5mm
- 4 pins with 0.1″ spacing
Pins
1. VCC
2. Data
3. NC
4. Ground
Qucik View -
Arduino Uno R3 + Camera Kit
₦ 8,500Quick ViewThe Arduino uno and Arduino Camera (OV7670) allows images to be easily captured from an Arduino Uno. With this kit all kinds of photography and image capturing project. Live video can be viewed on and LCD.
Camera Features
- Optical size 1/6 inch
- Resolution 640×480 VGA
- Onboard regulator, only single 3.3V supply needed
- Standard 0.1inch (2.54mm) pin pitch header connector
- Mounted with high quality F1.8 / 6mm lens
- Output support for Raw RGB, RGB (GRB 4:2:2, RGB565/555/444), YUV (4:2:2) and YCbCr (4:2:2) formats
- High sensitivity for low-light operation
- Low operating voltage for embedded portable apps
- Standard SCCB interface compatible with I2C interface
- Supports LED and flash strobe mode
- Supports scaling
- Lens shading correction
- Flicker (50/60 Hz) auto detection
- Saturation level auto adjust (UV adjust)
- Edge enhancement level auto adjust
- De-noise level auto adjust
Arduino Uno Features
- Microcontroller: ATmega328.
- Operating Voltage: 5V.
- Input Voltage (recommended): 7-12V.
- Input Voltage (limits): 6-20V.
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6.
- DC Current per I/O Pin: 40 mA.
Kit Contains
- Arduino Uno R3.
- OV7670 Camera Module.
Product InformationBrandQucik View -
Black Raspberry Pi 2/3 Case
₦ 950Quick ViewThis solidly built and compact Raspberry Pi case allows you to protect you Raspberry Pi device.
Features
Qucik View -
50W Bluetooth Audio Receiver Amplifier Module With Auxiliary Input
₦ 5,500Quick ViewThis Bluetooth audio receiver allows high quality sound to be played back via Bluetooth or auxiliary input. It can drive 4/6/8/16 Ohm speakers up to 2*25W.
Qucik View -
Raspberry Pi 3
₦ 26,000Quick ViewThis package allows you to get a Raspberry Pi and bootable Class 10 SD Card. Just boot and go!
- Class 10 SD Card with New Out of the Box Operating System (NOOBS).
- 16 GB Class 10 SD Card delivers high performance straight away.
- Raspberry Pi 3 Computer.
Raspberry Pi 3 Features:
The Raspberry Pi 3 is the third generation Raspberry Pi single board computer. This will help you bring alive your more demanding projects, learn Linux or just hack around. There are multiple Linux flavours even Windows 10.
New Features
- A 1.2GHz 64-bit quad-core ARMv8 CPU
- 802.11n Wireless LAN
- Bluetooth 4.1
- Bluetooth Low Energy (BLE)
Other Features:
- 1GB RAM
- 1 UART
- 1 SPI
- 1 I2C
- 4 USB ports
- 40 GPIO pins
- Full HDMI port
- Ethernet port
- Combined 3.5mm audio jack and composite video
- Camera interface (CSI)
- Display interface (DSI)
- Micro SD card slot (now push-pull rather than push-push)
- VideoCore IV 3D graphics core
Qucik View -
Pir Motion Sensor
₦ 1,100Quick ViewThis PIR motion sensor detects live moving objects such as humans or pets. It produces a 3.3V output for (5-200 seconds) to indicate presence of live moving object. It can be used to control lights, security detection, home automation, etc
- 5-12V Operating Voltage
- 3.3 V /Low 0V
- Adjustable sensitiity
- Variable trigger length (5-200 seconds)
- Repeated trigger (L position) or Single trigger (H position) setting
Qucik View
Reviews
There are no reviews yet.