PWM Motor Speed Controller With Line – DC 6V-28V 3A
₦ 5,500
Description:
The 1203BB DC Motor Speed Regulator controls the speed of a DC motor by adjusting Pulse-Width-Modulated (PWM). It provides a continuous current of 3A to your DC motor or other DC load. Besides, the circuit also includes a 3A fuse, with reverse connection of power supply and control the forward or reverse direction and the stop of DC motor by switch.
Features:
- Color: As the pictures show
- Material: Metal
- Size: about 5 * 3.2 * 1.5cm
- The input power range is DC6-28V
- Control the forward or reverse direction and the stop of DC motor by switch.
- Potentiometer with switch function.
- The switch cable length 15cm.
Operating Instruction:
- Before you attempting to wire the controller, make sure that the power is off.
- 1. Connect wires refer to the wiring diagram.
- 2. Turn on the power, and adjust the potentiometer.
- 3. The LED indicates the power up and the speed of motor.
Warning:
Do not reverse positive and negative power loads. This will damage the controller!
Package Included:
1 x 6V 12V 24V 3A 80W DC Motor Speed Controller
Only logged in customers who have purchased this product may leave a review.
Related Products
-
DRV8833 TB6612FNG Step Motor Driver Module
₦ 6,750Qucik View -
LM317 Device
₦ 1,000The LM317 device is an adjustable three-terminal positive-voltage regulator capable of supplying more than 1.5 A over an output-voltage range of 1.25 V to 37V. The output voltage can be set with the use of two resistors. It includes current limiting, thermal overload protection, and safe operating area protection.
Features
- Output Voltage Range Adjustable From 1.25 V to 37 V
- Output Current Greater Than 1.5 A
- Internal Short-Circuit Current Limiting
- Thermal Overload Protection
- Output Safe-Area Compensation
Qucik View -
2000W SCR Electronic Voltage Regulator Module (220V AC)
₦ 3,000Applicable Appliance: for Electric furnace, for water heater, for lamps, for small motor, for electric iron. etc
Qucik View -
PCA9685 16 Channel PWM Servo Driver Module
₦ 10,500Qucik View -
Soldering Iron with Adjustable Temperature Regulator
₦ 8,750This soldering iron is incredibly easy to use, simply set the temperature on the control knob to your desired heat ( 350°C is recommended) and get soldering !
The soldering iron takes less than a minute to heat up to its maximum temperature of 500°C
- Lead -free capable Temperature adjustable from 200-400°C
- Include 900M tip
- 50W Iron Ceramic Heater
Qucik View -
5V-35V PWM DC Motor Speed Controller Module
₦ 2,000Description:
5V-35V PWM DC Motor Speed Controller Module is a Mini Style DC Motor Speed Regulator controls the speed of a DC motor by adjusting Pulse-Width-Modulated (PWM). This allows controlling the speed of a motor with fully adjustable 0%-100%.The motor speed controller can easily provide a continuous current of 3A to your DC motor or other DC load.
Features:
- Mini DC 3-35V 5A PWM Motor Speed Controller. Wide voltage DC motor speed controller, PWM duty cycle: 1% -100%.
- Mini Style DC Motor Speed Regulator controls the speed of a DC motor by adjusting Pulse-Width-Modulated (PWM).
- Default disconnection of short circuit point, suitable for 5-35V input.
- Manually connect the short circuit point according your needs, suitable for low power 3-15v input.
- By screwing the potentiometer, you can turn off power supply output. High voltage and high current resettable fuse, overcurrent automatic disconnection, power off for cooling for a few seconds fuses automatic recovery.
Specifications:
- Operating voltage: DC4.5V-35V
- Output current: 0-5A
- Output power: 90W (max)
- Quiescent current: 7uA (standby)
- PWM duty cycle: 1% -100%
- PWM frequency: 20khz
- Size: 30mm x 26mm x 14mm (Without Handle)
Precautions:
- DC motor governor input is DC, can not directly connected to the AC (for example: home 220V AC), otherwise it will burn!
- DC power supply positive and negative terminals do not reverse, otherwise the governor may be damaged.
- The motor can be positive or negative, when the direction of operation and expectations do not match, you can adjust the line order to change the direction.
- Adjust the potentiometer knob to change the governor output duty cycle, the motor speed changes.
- Size: 30mm x 26mm x 14mm (Without Handle)
Package Includes:
- 1 x 5V-35V PWM DC Motor Speed Controller Module
Qucik View
Reviews
There are no reviews yet.