Only logged in customers who have purchased this product may leave a review.
Mini HDMI to HDMI Adapter
₦ 2,250
- Brand new and high quality.
- Connector: HDMI female to Mini HDMI male.
- Support resolution up to 1080P.
- Use this adaptor to convert one end of a standard HDMI cable to a mini HDMI male.
- Gold plated connectors, strain relief and foil shielding.
- Color: Black.
Package Included:
- 1 x HDMI Female to Mini HDMI Male Adapter.
NO Retail Box. Packed Safely in Bubble Bag
Related Products
-
Raspberry Pi 3
₦ 125,000This package allows you to get a Raspberry Pi and bootable Class 10 SD Card. Just boot and go!
- Class 10 SD Card with New Out of the Box Operating System (NOOBS).
- 16 GB Class 10 SD Card delivers high performance straight away.
- Raspberry Pi 3 Computer.
Raspberry Pi 3 Features:
The Raspberry Pi 3 is the third generation Raspberry Pi single board computer. This will help you bring alive your more demanding projects, learn Linux or just hack around. There are multiple Linux flavours even Windows 10.
New Features
- A 1.2GHz 64-bit quad-core ARMv8 CPU
- 802.11n Wireless LAN
- Bluetooth 4.1
- Bluetooth Low Energy (BLE)
Other Features:
- 1GB RAM
- 1 UART
- 1 SPI
- 1 I2C
- 4 USB ports
- 40 GPIO pins
- Full HDMI port
- Ethernet port
- Combined 3.5mm audio jack and composite video
- Camera interface (CSI)
- Display interface (DSI)
- Micro SD card slot (now push-pull rather than push-push)
- VideoCore IV 3D graphics core
Qucik View -
MAX485 TTL to RS485 Module
₦ 1,500This RS485 to TTL Module allows you to communicate to an RS-485 device, module or another microcontroller at over 1Mbps from over 1km away! This RS485 transciever can be easily interfaced to a microcontroller or Arduino
- Uses MAX485 integrated circuit
- Pinout DI,DE,RE,RD signals
- 5 Volt Operation
Qucik View -
Converter Module – USB To RS458
₦ 7,000This RS485 to TTL Module allows you to communicate to an RS-485 device, module or another microcontroller at over 1Mbps from over 1km away! This RS485 transciever can be easily interfaced to a microcontroller or Arduino
- Uses MAX485 integrated circuit
- Pinout DI,DE,RE,RD signals
- 5 Volt Operation
Qucik View -
3.3V-5V TXS0108E 8 Channel Bidirectional Logic Level Converter
₦ 2,500This chip allow easy conversion between logic levels allowing easy interfacing of Modules or other integrated circuits to a microcontroller or Arduino system.
- 1.2 V to 3.6 V on A Port and 1.65 to 5.5 V on B Port
- Output Enable Function Using OE pin
- VCCA connects to lower logic level eg 3.3V
- VCCB connects to higher logic level eg 5V
- When Ax has TTL 3.3V input, Bx will get TTL 5V output
- When Bx has TTL 5V input, Ax will get TTL 3.3V output
- NO direction control required
Example applications are Arduino to GSM connections, 3.3V SPI/I2C module connection to 5V system, UART interfacing between systems operating at different voltages
Qucik View -
I2C LCD Converter Module
₦ 3,000Description:-
I2C Module has a inbuilt PCF8574 I2C chip that converts I2C serial data to parallel data for the LCD display.
These modules are currently supplied with a default I2C address of either 0x27 or 0x3F. To determine which version you have check the black I2C adaptor board on the underside of the module. If there a 3 sets of pads labelled A0, A1, & A2 then the default address will be 0x3F. If there are no pads the default address will be 0x27.
The module has a contrast adjustment pot on the underside of the display. This may require adjusting for the screen to display text correctly.
Features:-
- Operating Voltage: 5V
- Backlight and Contrast is adjusted by potentiometer
- Serial I2C control of LCD display using PCF8574
- Come with 2 IIC interface, which can be connected by Dupont Line or IIC dedicated cable
- Compatible for 16×2 LCD
- This is another great IIC/I2C/TWI/SPI Serial Interface
- With this I2C interface module, you will be able to realize data display via only 2 wires.
Qucik View -
MAX3485 TTL To RS485 Module
₦ 3,750This RS485 to TTL Module allows you to communicate to an RS-485 device, module or another microcontroller at over 1Mbps from over 1km away! This RS485 transciever can be easily interfaced to a microcontroller or Arduino
- Uses MAX485 integrated circuit
- Pinout DI,DE,RE,RD signals
- 5 Volt Operation
Qucik View
Reviews
There are no reviews yet.