Only logged in customers who have purchased this product may leave a review.
FT232 FTDI To TTL Serial Adapter
₦ 1,600
A low-cost way to add USB capability to for Arduino or other microcontrollers. Use this for boot loading or uploading Arduino sketches with ease
- Can program Arduino mini, Pro Mini, Lily Pad and other Arduino devices without pinout.
- Working voltage: 3.3V/5V
- Chip: FT232RL
- Over current protection with 500 mA fuse
3 in stock
Related Products
-
CP2102 MICRO USB to UART TTL Module
₦ 1,5005A constant current LED driver and charger for lithium-ion battery
· 3.3V and 5V voltage output
· Supports baud rates from 300bps ~ 1Mbps
On-chip voltage regulator output voltage 3.3V
Supports data formats for 8 data bits, 1 stop bit and parity bits
Connotation 512 byte receive buffer and 512 byte transmit buffer
Support for hardware or X-ON / X-OFF handshakeQucik View -
3.3V-5V TXS0108E 8 Channel Bidirectional Logic Level Converter
₦ 950This chip allow easy conversion between logic levels allowing easy interfacing of Modules or other integrated circuits to a microcontroller or Arduino system.
- 1.2 V to 3.6 V on A Port and 1.65 to 5.5 V on B Port
- Output Enable Function Using OE pin
- VCCA connects to lower logic level eg 3.3V
- VCCB connects to higher logic level eg 5V
- When Ax has TTL 3.3V input, Bx will get TTL 5V output
- When Bx has TTL 5V input, Ax will get TTL 3.3V output
- NO direction control required
Example applications are Arduino to GSM connections, 3.3V SPI/I2C module connection to 5V system, UART interfacing between systems operating at different voltages
Qucik View -
Micro USB to DIP Adapter- Pair
₦ 1,000These Micro USB to DIP converter boards allow easy connection of a microcontroller or arduino to a PC using standard USB interface.
It may also be used to power a device over the USB port
- 3cm x 3cm x 3cm
Qucik View -
LM2596 Adjustable Step-Down Power Module With Digital Display
₦ 2,000This board carries the multipurpose LM2596 power supply and allows you deliver a regulated voltage for any electronic device without the need for soldering or a multimeter. Simply set it and hook it up. The module displays the output voltage on a built in seven segment display.
Features
- 4V-40V Input Voltage.
- Continuously adjustable output voltage range of 1.25V-37V .
- Maximum output current up to 3A
- Switch toggles between viewing output or input voltage.
- Clear Seven Segment display for showing operating voltages
Qucik View -
HC-12 Wireless Serial Module Up to 1km
₦ 3,500Imagine a wireless UART port with a range of up to 1km. You are looking at it
Features
- Working voltage: 3.2V~5.5V
- Default address range: 1km
- Baud rate: 5000bps
- Default idle current: 16MA (In different working modes operating current is different)
- Module dimensions: 27.8 x 14.4 x 4mm
- Operating frequency range: 433.4-473.0MHz, up to 100 channels of communication
- The maximum transmit power: 100mW (settable)
- Default factory settings: Mode FU3, baud rate is 9600bps, communication channels CH001 (433.4M)
Qucik View -
Wi-Fi Module Serial to USB Adapter Board ESP8266
₦ 1,500This USB ESP8266 adapter board which can be plugged directly to your computer allowing communication, testing and programming to be done on the module with ease.
· CH340 serial chip
· 3225 chip crystal, to enhance the stability of the serial port
Fully compatible with Windows, Mac and Linux systems
Qucik View
Reviews
There are no reviews yet.