esp32
esp32-development-board
esp32
esp32-development-board

ESP32 Development Board (WiFi + Bluetooth)

₦ 10,000

The ESP-32 is the newest and fastest ESP board by Espressif out there. It incorporates WiFi and Bluetooth in one easy to program package. It is easily programmable in the Arduino IDE.
Category:
Brand:
Tags: , , ,
Add to Wishlist
The ESP-32 is the newest and fastest ESP board by Espressif out there. It incorporates WiFi and Bluetooth in one easy to program package. It is easily programmable in the Arduino IDE.
Features
  • Dual-core Tensilica LX6 microprocessor
  • Up to 240MHz clock frequency
  • 520kB internal SRAM
  • Integrated 802.11 BGN WiFi transceiver
  • Integrated dual-mode Bluetooth (classic and BLE)
  • 2.2 to 3.6V operating range
  • 2.5 µA deep sleep current
  • 28 GPIO
  • 10-electrode capacitive touch support
  • Hardware accelerated encryption (AES, SHA2, ECC, RSA-4096)
  • 4MB Flash memory

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related Products

  • 0 out of 5

    ESP8266-01 WiFi Module

    ₦ 3,000

    The ESP8266 WiFi Module allows you to add Internet conncetivity to your next electronic project. It has a built-in TCP/IP protocol stack. AT commands are issued over UART. Fully Arduino friendly.

    • 3.3V Operating Voltage
    • 802.11 b/g/n
    • Wi-Fi Direct (P2P), soft-AP
    • Integrated TCP/IP protocol stack
    • Integrated low power 32-bit CPU could be used as application processor
    • SDIO 1.1 / 2.0, SPI, UART
    • Arduino compatible library

     

    AT Command Set

    //cdn.sparkfun.com/datasheets/Wireless/WiFi/Command%20Doc.pdf

     

     

    Buy Now
    Add to Wishlist
    Qucik View
  • 0 out of 5

    50W Bluetooth Audio Receiver Amplifier Module With Auxiliary Input

    ₦ 5,500

    This Bluetooth audio receiver allows high quality sound to be played back via Bluetooth or auxiliary input. It can drive 4/6/8/16 Ohm speakers up to 2*25W.

    Buy Now
    Add to Wishlist
    Qucik View
  • 0 out of 5

    HC-06 Bluetooth Module

    ₦ 6,000

    HC-06 Bluetooth module interfaces easily to microcontroller or Arduino with four I/O pins:

    VCC, GND, TXD, RXD. The module has a status LED.

    Control interface is via AT commands

    Buy Now
    Add to Wishlist
    Qucik View
  • 0 out of 5

    AT-09-BLE-Bluetooth-4-0-Module—HM-10-Compatible-6620015

    ₦ 5,000

    This Bluetooth 4.0 TTL transceiver module allows you to communicate with any gadget using the highly energy efficient Bluetooth 4.0 specification

    Features

    • Power input: 3.6V-6V DC(Can not higher than 6V)
    • It’s easy to use and safely enclosed in a plastic sheath
    • Bluetooth version: V4.0
    • Default baud rate: 9600 (Adjustable baudrate)
    • Default serial port setting: 9600, N, 8, 1
    • Operates as slave or master.
    • Ultra-low standby power consumption 90uA~400uA
    • Coverage up to 60 meters
    • Built in PCB antenna
    • Size: 43mm x 15mm
    Pinout
    • VCC: input power supply 3.3~6V, Prohibit more than 7V
    • GND: Ground
    • TX: transport
    • RX: receive
    • State: when bluetooth is connected , output “High level”, “no conntected” output “low level”
    • en:when module is connected, give a high level to “EN”,the module will disconnected.
    Buy Now
    Add to Wishlist
    Qucik View
  • bluetooth
    0 out of 5

    ELM327 Mini – Bluetooth OBD-II Diagnostics Protocol Scanner – CD Included

    ₦ 7,000

    The ELM327 Bluetooth Scanner allows  you to scan and disagnose OBD-II protocols and display over 3000 generic code definitions in the database. Clear trouble codes and turn off the MIL (“Check Engine” Light)

    Features

     

    • Works with all OBD-II compliant vehicles (essentially all modern vehicles)
    • Wireless (Bluetooth)
    • Software included for Palm, PDA
    • Software included for Windows PC
    • Software included for Windows Smartphone
    • Supports CAN bus
    • Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).
    • Clear trouble codes and turn off the MIL (“Check Engine” light)
    • Display current sensor data, including:
    • Engine RPM
    • Calculated Load Value
    • Coolant Temperature
    • Fuel System Status
    • Vehicle Speed
    • Short Term Fuel Trim
    • Long Term Fuel Trim
    • Intake Manifold Pressure
    • Timing Advance
    • Intake Air Temperature
    • Air Flow Rate
    • Absolute Throttle Position
    • Oxygen sensor voltages/associated short term fuel trims
    • Fuel System status
    • Fuel Pressure
    • Many more

     

     

    Buy Now
    Add to Wishlist
    Qucik View
  • 0 out of 5

    HC-05 Master-Slave Bluetooth Module

    ₦ 5,500

    This module can be set as a transmitter or receiver, transmitter can pair with receiver , receiver and receiver or transmitter and transmitter can’t communication between eachother, receiver can pair with computers and cell phone’s bluetooth.

    1. It is HC-05.
    2. Uses the CSR mainstream bluetooth chip, bluetooth V2.0 protocol standards.
    3. Module working voltage 3.3 V.
    4. Potter default rate of 9600, the user can be set up.
    5. The core module size : 28 mm x 15 mm x 2.35 mm.
    6. Working current: matching for 30 MA, matching the communication for 8 MA.
    7. Dormancy current: no dormancy.
    8. Used for GPS navigation system, water and electricity gas meter reading system.
    9. With computer and bluetooth bluetooth adapter, PDA, seamless connection equipment

    Commercial Series: Bluetooth module board Series
    With LED indicator light, use 150mA and 3.3V regulation chip.
    With VCC.GND.TXD.RXD foot for the Bluetooth
    With “Re-seach” button(ON/OFF/WAKE foot for it , external MCU outinput “High level” can control module to re-seach)
    Compatible with bluetooth master module”.slave module”or master-slave(whole) module.
    Input voltage: 3.3~6V
    Size: 1.55cm*3.98cm
    Note:

    input power supply 3.3~6V, Prohibit more than 7V
    No “Automatically prevent power supply peversing func”, so please correctly connect power supply
    We advise to install “Bluetooth master module”
    The “State” is output foot for LED status, when bluetooth “Unconnected”, output “Pulse” ; when bluetooth “connected”, output “High level”, we can determine the states from “MCU”
    If only the board , No any “Bluetooth Function “

    Buy Now
    Add to Wishlist
    Qucik View