Only logged in customers who have purchased this product may leave a review.
Adjustable Power Supply Voltage Regulating/Reduction – LM 2596S
₦ 2,250
Excellent for powering GSM modules, charging batteries, etc
Input: 3~ 40V; Output 1.25 ~ 35V ( Adjustable)
Max 3A Output Current
Suggest to work within 2.5A for long term use
Configurable to charge different kinds of sealed lead acid batteries.
Configurable to charge mobile phones at 5V with a very smooth output voltage.
Related Products
-
DC 3V-6V Boost Step up Power Module High-Voltage Generator
₦ 4,500Commonly used in high-pressure production, electronic DIY, product development, high-voltage electronic security and so on. The high-voltage module uses the principle of Tesla coil made of high-voltage pulse output voltage current, small size, high efficiency, simple external circuit(just plug in the switch).
This module is a small production with high-pressure science inverter transformer / booster finished module, the input terminal DC 3V – 6V can get 20KV DC high voltage (about 1-2 cm arc) at the output can be used for high school science experiments , electronic equipment, negative ion generator, high voltage source to use when making small science.
Qucik View -
Single Channel Amplifier Board – 18W – TDA2030A
₦ 2,000This TDA2030A audio power amplifier can help in the design of any audio circuit in need of extra amplification. Simply connect power and an input signal and have a boost in your audio project. Can be used with FM receivers, audio recording chips, microcontroller PWM output, etc.
Qucik View -
5A DC-DC CC/CV Lithium Charger LED Driver Power Module
₦ 2,500This very utilitarian board delivers constant voltage or constant current output and comes in handy as a battery charger (Lead acid or Lithium battery), LED Constant current driver, as well as other power supply needs. It is also quite chunky -deliverying up to 5A output.
-
- Output voltage: 0.8V-30V
- Input voltage: 5V-32V
- Separately adjustable voltage and current outputs
- Size: 51 * 26.3 * 14 (L * W * H) (mm)
- Operating Temperature: -40 to +85 Degrees
- Voltage Regulation: +/-2.5%
- Load Regulation: +/- 0.5%
- Output ripple: 50mV
- Switching frequency: 300KHz
- Conversion efficiency: 95% (the highest)
- Output current: adjustable maximum 5A
Qucik View -
-
5V-35V PWM DC Motor Speed Controller Module
₦ 2,000Description:
5V-35V PWM DC Motor Speed Controller Module is a Mini Style DC Motor Speed Regulator controls the speed of a DC motor by adjusting Pulse-Width-Modulated (PWM). This allows controlling the speed of a motor with fully adjustable 0%-100%.The motor speed controller can easily provide a continuous current of 3A to your DC motor or other DC load.
Features:
- Mini DC 3-35V 5A PWM Motor Speed Controller. Wide voltage DC motor speed controller, PWM duty cycle: 1% -100%.
- Mini Style DC Motor Speed Regulator controls the speed of a DC motor by adjusting Pulse-Width-Modulated (PWM).
- Default disconnection of short circuit point, suitable for 5-35V input.
- Manually connect the short circuit point according your needs, suitable for low power 3-15v input.
- By screwing the potentiometer, you can turn off power supply output. High voltage and high current resettable fuse, overcurrent automatic disconnection, power off for cooling for a few seconds fuses automatic recovery.
Specifications:
- Operating voltage: DC4.5V-35V
- Output current: 0-5A
- Output power: 90W (max)
- Quiescent current: 7uA (standby)
- PWM duty cycle: 1% -100%
- PWM frequency: 20khz
- Size: 30mm x 26mm x 14mm (Without Handle)
Precautions:
- DC motor governor input is DC, can not directly connected to the AC (for example: home 220V AC), otherwise it will burn!
- DC power supply positive and negative terminals do not reverse, otherwise the governor may be damaged.
- The motor can be positive or negative, when the direction of operation and expectations do not match, you can adjust the line order to change the direction.
- Adjust the potentiometer knob to change the governor output duty cycle, the motor speed changes.
- Size: 30mm x 26mm x 14mm (Without Handle)
Package Includes:
- 1 x 5V-35V PWM DC Motor Speed Controller Module
Qucik View -
3V to 5V USB Output Charger Step up Power Module
₦ 2,000This module is used as a DC-DC booster, converting 3V to 5V. With the aid of this board, you can charge your mobile phones and power other kinds of USB devices from power sources with voltage as little as 1.5V such as batteries.
- Non-isolated step-up module (BOOST)
- Input voltage: 1-5V
- Output voltage: 5.1-5 .2 V
- Output Current: Rated 1A-1.5A
- Efficiency: Up to 96% (the higher the input voltage, the higher the efficiency)
- Switching frequency: 500KHz
- Output ripple: 30mV (MAX) 20M bandwidth (input 4V output 5.1V 1A)
- Voltage indication: LED lights with load (input voltage less than 2.7V LED indicator off)
- Operating Temperature: Industrial (-40°c to +85°c)
- Full load temperature rise: 30°c
- Quiescent Current: 130uA
- Load regulation: ± 1%
- Voltage regulation: ± 0.5%
- Dynamic response speed: 5% 200uS
- Short circuit protection: None (Please use the lithium battery with protection.)
Qucik View -
LM386 Amplifier + Free Socket
₦ 900LM386 is a power amplifier designed for use in low voltage consumer applications. The gain is internally set to 20 but can be configured to any value from 20 to 200. It is easy to connect for audio amplifiers and many other circuts
Features
- Good for battery powered circuits
- Minimal external parts
- Wide supply voltage range: 4V–12V or 5V–18V
- Low quiescent current drain: 4mA
- Voltage gains from 20 to 200
- Ground referenced input
- Self-centering output quiescent voltage
- Low distortion: 0.2% (AV = 20, VS = 6V, RL = 8W, PO = 125mW, f = 1kHz)
Qucik View
Reviews
There are no reviews yet.