Home » Shop » AD-366 0.8mm 50g Tin wire
AD-366 0.4mm 30g Tin wire
AD-366 0.4mm 30g Tin wire ₦ 5,000
Back to products
Arduino Uno R3
Arduino Uno R3 ₦ 14,000
Hot
Click to enlarge

    AD-366 0.8mm 50g Tin wire

    ₦ 7,500

    30 in stock

    30 in stock

    Fast Shipping

    Technical Support

    Nationwide Delivery

    To all 36 States

    Description
    The AD-366 0.8mm 50g tin solder wire is the standard, general-purpose “all-rounder” size for electronics. While 0.4mm wire is strictly for microscopic components, 0.8mm wire delivers a higher volume of solder per millimeter, making it the go-to choice for everyday circuit assembly and repair.

    Features:
    • Hobby-Sized Supply: Provides enough material for dozens of medium-sized projects without the bulk or high cost of a massive 500g industrial spool.
    • Structural Integrity: Unlike flimsy 0.4mm wire that bends out of shape instantly, 0.8mm wire is rigid enough to be precision-guided into a joint with one hand.
    • Fast Wetting: Premium brands melt uniformly, minimize smoke generation, and leave behind very little non-conductive residue.
    Applications:
    • Through-Hole Component Soldering: Perfect for attaching traditional electronic components (resistors, capacitors, diodes, and LEDs) whose metal legs pass completely through a printed circuit board (PCB).
    • Medium-Sized Connectors and Jacks: Ideal for soldering audio jacks (3.5mm, XLR, quarter-inch), DC power barrels, USB ports, and pin headers onto boards.
    • Wired Splices and Joints: Used to join standard-gauge electrical wires (around 18 to 26 AWG), such as extension cords, battery leads, and small motor connections.
    • Hobbyist and Educational Kits: The default wire size included in DIY electronics kits (like Arduino or Raspberry Pi add-ons) because it is thick enough to handle easily but thin enough not to cause massive solder blobs.
    • Appliance and Toy Repair: Used for fixing severed power wires or loose internal joints in household electronics, remote-controlled cars, and kitchen appliances.
    Best Practices for 0.8mm Solder:
    • Use a Standard Chisel Tip: Pair this wire with a medium screwdriver or chisel tip. Conical micro-tips will not transfer enough heat fast enough to melt 0.8mm wire cleanly.
    • Mind the Solder Feed: Because it is twice as thick as 0.4mm wire, you only need to feed a tiny tap of wire into the joint. Pushing too much wire in will quickly create an oversized, globby joint.
    • Keep Heat to 2-3 Seconds: Touch the iron tip to the component leg and PCB pad together, tap the 0.8mm wire directly against the joint (not the iron tip), and pull both away within three seconds to prevent heat damage.