600W Booster Module

It is a 600W boost power module. It is a non-isolated boost module. It can convert DC 10V-60V to DC 12-60V.

Features:

• Its conversion efficiency is high.
• It has CV-ADJ potentiometer and CC-ADJ potentiometer, which can adjust the output voltage and current.
• It has a wide range of applications.
• It can charge batteries, lithium batteries etc.
• It uses a high thermal conductivity aluminum substrate design.

Parameter:

• Product Name:600W Boost Power Module
• Input Voltage: DC 10V~60V
• Input Current: 10A(Max)
• Static Working Current:10mA
• Output Voltage: DC 12V~60V
• Output Current: 10A
• Constant Current Range: 0.2A~10A
• Working Frequency: 150KHz
• Conversion Efficiency: 92%~96%
• Work Temperature: -40℃~85℃
• Work Humidity: 5%~95%RH
• Size:85*52*21mm

Output Voltage Adjustment:

• Adjust the CV-ADJ potentiometer, according to your battery or LED, set the output voltage to the voltage value you need.
• Turn the voltage down clockwise, and turn it up counterclockwise.

Output Current Adjustment:

• Adjust the CC-ADJ potentiometer clockwise about 20 turns, set the output current to the minimum, connect the LED, and adjust the CC-ADJ potentiometer to the current you need.
• For battery charging, after the battery is discharged, connect to the output and adjust the CC-ADJ to the current you need. (When charging, you must use the discharged battery to adjust, because the battery is left The more power, the lower the charging current.)
• Please do not adjust the current in a short-circuit mode. The circuit structure of the booster module cannot be adjusted in a short-circuit mode.

Instructions for Use:

• Constant voltage adjustable range:DC12-60V (clockwise to decrease, counterclockwise to increase)
• Constant current adjustable range:0.2A-10A (clockwise to decrease, counterclockwise to increase)
• When the input current exceeds 6A,heat dissipation needs to be strengthened (the aluminum substrate is attached to the flat metal part).
• The input voltage cannot be lower than 10V and exceed 60V.
• The maximum input current cannot exceed 10A,and the power cannot exceed 600W.
• When using, it must be ensured that the input voltage is lower than the output voltage by more than 2V.\
• Before connecting the load, please adjust the required voltage and current when there is no load (the no-load voltage should be increased by 3-5V when the current is constant).
• When using a switching power supply or other secondary power supply, please make sure that the power of the power supply should be more than twice the power of this module.

Application:

• DIY a regulated power supply, input 12V,output can be adjusted from 12-50V.
• To supply power to your electronic equipment, you can set the output value according to your system voltage.
• As the vehicle power supply, it can supply power to your laptop and various digital products.
• DIY a high-power notebook mobile power supply.
• The solar panel stabilizes the voltage.
• Charging batteries, lithium batteries etc.
• Drive high-power LED lights.

Note:

• The input and output cannot be reversed.
• The input voltage should not be lower than 10V.Too low input voltage will damage the power supply.(Be careful to prevent over-discharge of the battery when using the battery)
• When working, the input and output voltage and current can not exceed the maximum value, so as not to damage the power supply.
• Pay attention to ventilation and heat dissipation when working with full load for a long time to extend the service life of the power supply.
• Pay attention to dust and moisture.

Package Includes:
1 x 600W Booster Module