Only logged in customers who have purchased this product may leave a review.
16×2 LCD Module
16×2 LCD Module
₦ 3,000
16X2 LCD Module with Blue backlight
-
- Easily controlled from any microcontroller
- 4/8 bit communication mode
- Special character mode
- Blue backlight
- HD44780 Controller
Related Products
-
0 out of 5
4-Channel Relay Module
₦ 4,500The 4-channel relay module is able to switch up to 250A 10A and can be easily applied to home automation and control applications.
Uses:
- Supports all MCUs and Arduino Modules
- Easy connection
- Simple 5V Operation
- Very handy for home automation and control applications
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
128 X 64 Graphic LCD Display
₦ 5,500This 128 x 64 Graphic LCD Module allows you to easily display graphics and text on screen. The NT7108 controller is very popular and widely supported.
- Built-in controller (NT7108 or equivalent)
- +5V power supply
- 1/64 duty cycle
- Built-in negative voltage
- Compatible with KS0108B and KS0107B controller
Pinout
1 V Power supply for logic 2 V Ground 3 V Contrast Adjustment 4~11 DB0~DB7 Data bus line 12 CS1 Select Column 1~ Column 64 13 CS2 Select Column 65~ Column 128 14 /RST Controller reset signal, Active Low 15 R/W Read/Write select signal 16 D/I Data/ Instruction select signal 17 E Enable signal 18 V Negative Voltage Output 19 A Power supply for B/L + 20 K Power supply for B/L Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
I2C LCD Module + 16×2 LCD
₦ 5,000The 16X2 LCD is the most popular LCD for displaying basic data out there, but it can take up as much as 12 I/O pins from your microcontroller. This kit combines the LCD with an I2C converter to ease connectivity and free up those valuable I/O pins. With I2C, only 2 I/O pins are used.
Features
- Arduino compatible I2C LCD module
- Software cotrolled backlight
- 16 X 2 LCD displays standard ASCII characters as well as special characters
- Widely available libraries for Arduino and other microcontroller architectures
- Example Arduino code at blog.nerdshed.com.ng
Kit Contains
- 16 X2 LCD
- I2C converter
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
3V to 5V USB Output Charger Step up Power Module
₦ 2,000This module is used as a DC-DC booster, converting 3V to 5V. With the aid of this board, you can charge your mobile phones and power other kinds of USB devices from power sources with voltage as little as 1.5V such as batteries.
- Non-isolated step-up module (BOOST)
- Input voltage: 1-5V
- Output voltage: 5.1-5 .2 V
- Output Current: Rated 1A-1.5A
- Efficiency: Up to 96% (the higher the input voltage, the higher the efficiency)
- Switching frequency: 500KHz
- Output ripple: 30mV (MAX) 20M bandwidth (input 4V output 5.1V 1A)
- Voltage indication: LED lights with load (input voltage less than 2.7V LED indicator off)
- Operating Temperature: Industrial (-40°c to +85°c)
- Full load temperature rise: 30°c
- Quiescent Current: 130uA
- Load regulation: ± 1%
- Voltage regulation: ± 0.5%
- Dynamic response speed: 5% 200uS
- Short circuit protection: None (Please use the lithium battery with protection.)
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
XL4015 5A DC-DC Step Down Adjustable Supply Module with Display
₦ 3,500The XL4015 power supply delivers up to 5A to loads that need more current. The output voltage and current are fully adjustable. This module comes complete with heat sink and mounting screws.
Features
- Input voltage range: 5-36VDC
- Output voltage range:1.25-32VDC adjustable
- Output current: 0-5A
- Output power: 75W
- High efficiency up to 96%
- Built in thermal shutdown function
- Built in current limit function
- Built in output short protection function
- Input reverse polarity protection: None (if required, high current diode in series with the input).
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
HTC-1 Digital LCD Electronic Alarm Clock Hygrometer
₦ 5,500Description:
This HTC-1 meter can measure indoor temperature, humidity and time with reliable measurement results.
Max/min value measurement, clock alarm function, desk-top placing or wall hanging.
Widely used in indoor temperature and humidity measurement, apply to lab, cold chain transport, warehousing and other occasions.Features:
- Measuring humidity, temperature and time simultaneously, large LCD display, easy for reading.
- Memory of MAX & MIN measuring value,12-hour / 24-hour displaying system selectable.
- Temperature unit is switchable: C/F unit selectable.
- Clock alarm function, compact and light, convenient to carry,
- Desk-top placing or wall hanging, easy to use.
Specifications:
- Model:HTC-1
- Color: White
- Temperature range: Indoor &Outdoor -50~+70(-58~+158°F)
- Temperature Measuring Accuracy: ±1C / 1.8F
- Temperature Resolution: 0.1C / 0.2F
- Humidity Range: 10%RH ~ 99%RH
- Humidity Measuring Accuracy: ±5%RH
- Humidity Resolution: 1%
- Power supply:1.5Vf×1 (AAA size)
- Device dimension:10.2×9.3×2.1cm/4.02×3.66×0.83″
Package Information:
- Package Size:11 x 10 x 3.5cm / 4.3 x 3.9 x 1.4in
- Package Weight:88g / 3.1oz
Package List:
- 1 x Temperature Humidity Meter
- 1 x User Manual
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View
Reviews
There are no reviews yet.