GY-NEO6MV2 GPS Module

The NEO-6M V2 GPS Module is a highly reliable and precise GPS receiver designed for various applications requiring accurate location tracking and timing. This module is based on the u-blox NEO-6M GPS receiver, providing high sensitivity and low power consumption. It is widely used in navigation, tracking, and timing applications.
Features:

• High sensitivity and accuracy
• Supports GPS, QZSS, and SBAS (WAAS, EGNOS, MSAS)
• Low power consumption
• Compact size and easy integration
• Built-in EEPROM for configuration storage
• Onboard battery for faster cold starts
• TTL logic level compatible
• Antenna connection with SMA connector

Technical Specifications:

• Receiver Type: 50 channels, GPS L1 C/A code
• Sensitivity: -161 dBm (tracking), -148 dBm (cold starts)
• Update Rate: Up to 5 Hz
• Accuracy: Position: 2.5 m CEP, Velocity: 0.1 m/s, Time: 30 ns
• Cold Start Time: 27 seconds
• Hot Start Time: 1 second
• Operating Voltage: 3.3V to 5V
• Power Consumption: 37 mA
• Communication Interface: UART (TTL), default baud rate: 9600 bps
• Antenna: External active antenna via SMA connector
• Dimensions: 25 mm x 35 mm x 6 mm
• Operating Temperature Range: -40°C to +85°C

Applications:

• Vehicle and personal navigation
• Asset tracking
• Timing applications
• Geocaching
• Marine navigation
• Location-based services

Usage:

1. Power Supply: Connect the module to a 3.3V or 5V power supply.
2. Antenna Connection: Attach an external active GPS antenna to the SMA connector.
3. Communication Setup: Connect the UART pins (TX, RX) to a microcontroller or serial interface with a compatible TTL logic level.
4. Configuration: Configure the module settings if necessary using appropriate software or commands.
5. Data Reception: Receive GPS data through the UART interface and process it for your application.
6. Position Fix: Wait for the module to acquire satellite signals and provide a position fix.