Only logged in customers who have purchased this product may leave a review.
ESP8266-01 WiFi Module
- You cannot add "AT-09-BLE-Bluetooth-4-0-Module---HM-10-Compatible-6620015" to the cart because the product is out of stock.
ESP8266-01 WiFi Module
₦ 4,000
The ESP8266 WiFi Module allows you to add Internet conncetivity to your next electronic project. It has a built-in TCP/IP protocol stack. AT commands are issued over UART. Fully Arduino friendly.
- 3.3V Operating Voltage
- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated low power 32-bit CPU could be used as application processor
- SDIO 1.1 / 2.0, SPI, UART
- Arduino compatible library
AT Command Set
//cdn.sparkfun.com/datasheets/Wireless/WiFi/Command%20Doc.pdf
Available on backorder
Related Products
-
0 out of 5
3.3V 700mA Isolated Switching
₦ 3,000This AC-DC 220VAC 5VDC 700ma isolated power supply module has temperature protection, over current protection and short circuit protection, high and low voltage isolation withAC85 ~ 265 v wide voltage input, ac/dc current, 431 precision voltage stability DC5V outputSmall size, stable performance, cost-effectiveTechnical Specifications:Condition: brand newQuantity: 1PCSInput voltage: AC 85 ~ 265 v 50/60 hz or DC 100~ 370 vImput current: 0.0273A(AC110V) 0.014A(AC220V)Input Inrush Current: 20AOutput voltage: DC 5V (+ / – 0.2 V)Output current 700 mAPower 3.5 WOperating temperature -20~60 degreeRelative humidity 40-90%RHOutput 5V, min current 0a, max current 700mA, peak current: 800mA, output range: 4.8~5.2v, ripple wave: 60mVOutput power:0-4W(DC current)Output efficiency: 80%Switch machine overshoot: MAX 10%Output voltage rise time: MAX 100MSOutput over voltage: 4.8-5.2V, recovery: Lock, restart after recoveryOutput over power protection: YES, recovery: Lock, restart after recoveryShort-circuit protection: YES, automatic recovery after problem solvedTemperature protection: YES, recovery: Lock, restart after recoveryOvercurrent protection: YES, recovery: Lock, restart after recoveryProduct added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
12V Relay Module- 30A
₦ 800These Single Pole Double Throw(SPDT) relays are capable of switching up to 30A loads.
Features
-
- Single Pole Double Throw orientation
- 12V Coil
- Max Load (30A @ 220V AC and 30A @ 28V DC)
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
-
0 out of 5
HC-05 Master-Slave Bluetooth Module
₦ 9,500This module can be set as a transmitter or receiver, transmitter can pair with receiver , receiver and receiver or transmitter and transmitter can’t communication between eachother, receiver can pair with computers and cell phone’s bluetooth.
1. It is HC-05.
2. Uses the CSR mainstream bluetooth chip, bluetooth V2.0 protocol standards.
3. Module working voltage 3.3 V.
4. Potter default rate of 9600, the user can be set up.
5. The core module size : 28 mm x 15 mm x 2.35 mm.
6. Working current: matching for 30 MA, matching the communication for 8 MA.
7. Dormancy current: no dormancy.
8. Used for GPS navigation system, water and electricity gas meter reading system.
9. With computer and bluetooth bluetooth adapter, PDA, seamless connection equipmentCommercial Series: Bluetooth module board Series
With LED indicator light, use 150mA and 3.3V regulation chip.
With VCC.GND.TXD.RXD foot for the Bluetooth
With “Re-seach” button(ON/OFF/WAKE foot for it , external MCU outinput “High level” can control module to re-seach)
Compatible with bluetooth master module”.slave module”or master-slave(whole) module.
Input voltage: 3.3~6V
Size: 1.55cm*3.98cm
Note:input power supply 3.3~6V, Prohibit more than 7V
No “Automatically prevent power supply peversing func”, so please correctly connect power supply
We advise to install “Bluetooth master module”
The “State” is output foot for LED status, when bluetooth “Unconnected”, output “Pulse” ; when bluetooth “connected”, output “High level”, we can determine the states from “MCU”
If only the board , No any “Bluetooth Function “Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
A4988 Stepper Motor Driver Module
₦ 3,000A4988 is a microstepping stepper motor driver. It drives bipolar stepper motors and has adjustable current limit, over-current and over-temperature protection.
Key Featues:
-
- 8V to 32V Operating voltage
- 3-5V logic supply
- Up to 2A output current per coil
- 5 step resolutions: Full step, 1/2 step, 1/4 step, 1/8 step, 1/16 step
- Adjustable maximum current output
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
-
0 out of 5
5V DC 2 Channel Solid State Relay Module
₦ 3,000This is a 5V solid state relay 240V 2A, able to control sizable loads.
Features
-
- High current relay, AC250V 10A, DC30V 10A
- 2 LEDs to indicate when relays are on
- Works with logic level signals from 3.3V or 5V devices
- Opto-isolation circuitry
- PCB size: 50×45 mm
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
-
0 out of 5
A6 GSM & GPRS Module
₦ 13,000A module that supports dual-band GSM/GPRS network, available for GPRS and SMS. Comes ready to keep your project connected via phone calls, SMS, or the Internet.
- Working frequency: quad-band network, 850 / 900 / 1800 / 1900MHz
- Working voltage: 4.5~5.5V DC (On-board voltage regulator circuit supply power for A6 module)
- Working current: maximum of 2A
- Sleep current: 5mA
- Onboard Micro SIM card holder, you can install Micro SIM card
- Onboard Micro USB interface for external power supply
- Communication Interface: TTL serial port
- Baud rate: 115200bps and it can also be set by AT command.
- Interface logic voltage: 3.3V
- Make and answer phone calls using a headset and electret microphone.
- Send and receive SMS messages.
- Send and receive GPRS data (TCP/IP, HTTP, etc.)
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View
Reviews
There are no reviews yet.