Only logged in customers who have purchased this product may leave a review.
8-Bit Microcontroller – PIC18F452
₦ 3,500
High-Performance 8 bit Microcontrollers.
Features inlude:
-
- Capable 40MHz operation (10 Million Instructions per Second)
- 32K Flash Memory
- 1.5kB RAM
- 8X8 Hardware Multiplier
- UART Module
- 10bit ADC Module
- ICSP Programming
- PWM Module
- I2C Module
Out of stock
Related Products
-
3.3V-5V TXS0108E 8 Channel Bidirectional Logic Level Converter
₦ 950This chip allow easy conversion between logic levels allowing easy interfacing of Modules or other integrated circuits to a microcontroller or Arduino system.
- 1.2 V to 3.6 V on A Port and 1.65 to 5.5 V on B Port
- Output Enable Function Using OE pin
- VCCA connects to lower logic level eg 3.3V
- VCCB connects to higher logic level eg 5V
- When Ax has TTL 3.3V input, Bx will get TTL 5V output
- When Bx has TTL 5V input, Ax will get TTL 3.3V output
- NO direction control required
Example applications are Arduino to GSM connections, 3.3V SPI/I2C module connection to 5V system, UART interfacing between systems operating at different voltages
Qucik View -
Raspberry Pi 3 Model B+ (Pre-loved with warranty)
₦ 50,000- The Raspberry Pi 3 Model B+ is the latest product in the Raspberry Pi 3 range, boasting a 64-bit quad core processor running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT.
Qucik View -
AVR Programmer USB-ASP
₦ 2,500USBasp is a USB in-circuit programmer for Atmel AVR controllers. No special drivers required.
Key Features:
- Read or write the microcontroller EEPROM, firmware.
- Support for Windows, Mac OS X and Linux (will work on Windows 8.1)
- 5 KB/sec maximum write speed
- Software controlled SCK option to support targets with low clock speed (< 1.5MHz)
Qucik View -
PIC12F683 Microcontroller
₦ 1,000The Low Pin-count (8 Pins) allows you to add automated control to the smallest projects
- 2.0V – 5.5V Operating Voltage
- Mid-range x14 architecture
- Built in EEPROM Data Memory
- nanoWatt Energy saving technology
- 10-bit A/D (4 Channels)
- Standard Capture/Compare/PWM (CCP) module.
Qucik View -
Arduino LilyPad – Atmega 328 Model
₦ 6,000The LilyPad Arduino 328 Board is an Arduino based board designed for making wearable and e-textile type projects. It is fully Arduino compatible and has holes for easily sewing it into projects. LEDs, Sensors, buttons and so much more can be easily integrated.
Features:
- ATmega328 Microcontroller
- Operating Voltage 2.7-5.5 V
- Input Voltage 2.7-5.5 V
- Digital I/O Pins 14
- PWM Channels 6
- Analog Input Channels 6
- DC Current per I/O Pin 40 mA
- Flash Memory 16 KB (of which 2 KB used by bootloader)
- SRAM 1 KB
- EEPROM 512 bytes
- Clock Speed 8 MHz
Qucik View -
PICkit 3 + Free Pic – 16F628
₦ 20,500PICkit 3 In-Circuit Debugger/Programmer uses in-circuit debugging logic incorporated into each chip with Flash memory to provide a low-cost hardware debugger and programmer. With the PICkit3, almost any Microchip PIC microcontroller can be programmed and debugged.
Free 16F628 8-bit microcontroller included.
Features
- USB (Full speed 12 Mbits/s interface to host PC)
- Real-time execution
- MPLAB IDE compatible (free copy included)
- Built-in over-voltage/short circuit monitor
- Firmware upgradeable from PC/web download
- Totally enclosed
- Supports low voltage to 2.0 volts (2.0v to 6.0V range)
- Diagnostic LEDs (power, busy, error)
- Read/write program and data memory of microcontroller
- Erase of program memory space with verification
- Freeze-peripherals at breakpoint
- Program up to 512K byte flash with the Programmer-to-Go
- Free 16F628 microcontroller included
Qucik View
Reviews
There are no reviews yet.