Only logged in customers who have purchased this product may leave a review.
XL4015 5A DC-DC Step Down Adjustable Supply Module with Display
XL4015 5A DC-DC Step Down Adjustable Supply Module with Display
₦ 3,500
The XL4015 power supply delivers up to 5A to loads that need more current. The output voltage and current are fully adjustable. This module comes complete with heat sink and mounting screws.
Features
- Input voltage range: 5-36VDC
- Output voltage range:1.25-32VDC adjustable
- Output current: 0-5A
- Output power: 75W
- High efficiency up to 96%
- Built in thermal shutdown function
- Built in current limit function
- Built in output short protection function
- Input reverse polarity protection: None (if required, high current diode in series with the input).
Out of stock
Related Products
-
0 out of 5
TRRS 3.5mm Plug Jack Stereo Extension Module
₦ 1,500This is a 3.5mm headphone jack with standard 2.54mm header slots. All standard 3.5mm plugs for microphones or earpieces plug right in.
Features
• Material: Plastic + metal
• Mini design, portable and easy to use
• This breakout board makes it easy to add a TRRS jack to your prototype or project by breaking out each conductor to a standard 0.1″ spaced header.
• Lead to the left channel, right channel, ground wire, and the lines of the plugProduct added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
MAX7219 Dot Matrix 4in1 Display Module
₦ 4,500Description:
MAX7219 Dot Matrix 4-in-1 Display Module is an integrated serial input/output common-cathode display driver, it connects the microprocessor 7-segment digital LED display with 8 digits, you can also connect a bar graph display or 64 independent LED. Thereon including a B-type BCD encoder chip, multi-channel scanning loop segment word driver, but also a static RAM 8 x 8 for storing each data. Only one external register is used to set the segment current of each LED.
Specifications and Features:-
- Dimensions: 128 x 32 x 1.5cm(LxWxH)(All 4 in 1)
- Dimension 32 x 32 x 1.5 cm (LxWxH) (Single Module)
- A single module can drive an 8×8 dot matrix common cathode
- Operating voltage: 5V
- Weight: 55 gm
- Fixing screws with 64 holes with a diameter 3mm
- Module with input and output interfaces
- Support for cascading multiple modules
Wiring Instructions:-
The left side of the module to the input port, the right to an output port.
When the control of a single module, simply input port connected to CPU
When a plurality of cascaded modules, input and output termination CPU, an input terminal of the second output end of the first module a module, the first two modules of the input terminal of the three termination modules, and so on..
Pin Description:-
- VCC 5V
- GND GND
- DIN P2.2
- CS P2.1
- CLK P2.0
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
Dual USB Power Bank Board with LCD Display
₦ 2,500Dual USB battery charger with a built in LCD module for visual feedback
Features
-
- Micro USB input: 5V 1A
- USB Output: 5V 2.1A / 5V 1A(Dual USB interface)
- Charging display: LCD
- Batteries Type: Lithium-ion batteries (18650)
- Product Size: 57mm x 28mm
- Screen size:27mm x 17mm
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
-
0 out of 5
4-Channel Relay Module
₦ 4,500The 4-channel relay module is able to switch up to 250A 10A and can be easily applied to home automation and control applications.
Uses:
- Supports all MCUs and Arduino Modules
- Easy connection
- Simple 5V Operation
- Very handy for home automation and control applications
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
Graphic LCD 84×48 – Nokia 5110 – Arduino Compatible
₦ 6,000The Nokia 5110 is a basic graphic LCD screen for lots of applications. A much richer information set can be displayed on this screen.
It uses the PCD8544 controller, same used in the Nokia 3310 LCD. The PCD8544 is a low power CMOS LCD controller/driver, designed to drive a graphic display of 48 rows and 84 columns. All necessary functions for the display are provided in a single chip, including on-chip generation of LCD supply and bias voltages, resulting in a minimum of external components and low power consumption. The PCD8544 interfaces to microcontrollers through a serial bus interface.
There is an Arduino library and MikroC library
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
12V Relay Module – 10A –Pair
₦ 1,500This 6V Relay allows your to control loads with up to 10A consumption
Features:
-
- 6V Coil
- Maximum Load DC: 24V (DC) @ 10A
- Maximum Load AC: 240V (AC) @ 10A
- Maximum turn-on time: 10ms
- Maximum turn-off time: 5ms
- Easy through hole mounting arrangement
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
Reviews
There are no reviews yet.