Only logged in customers who have purchased this product may leave a review.
Voltage Sensor
₦ 1,500
Due to the current wide range of electronic products , power supply voltage is also different , in order to detect it needs a suitable voltage detection module and the controller. controller analog interface detects the input voltage up to 5V, ie greater than the voltage of 5V will not be detected.
2014 latest voltage detection module can solve this problem and achieve greater than the voltage of 5V is detected , this module is based on the design principles of the resistor divider , make red terminal interface input voltage narrow five times , analog input voltage up to 5V , then the input voltage of the voltage detection module can not be greater than 5V × 5 = 25V ( 3.3V system, if used , can not be greater than the input voltage 3.3Vx5 = 16.5V). Because AVR chips used in 10 AD, so the simulation resolution of this module is 0.00489V (5V / 1023), so the minimum input voltage detection module detects voltage 0.00489V × 5 = 0.02445V.
By 3P sensor cable plugged into the sensor expansion board , not only can easily detect the size of the battery voltage , monitoring interactive media works or battery-powered robot power, can also display the voltage produced by the voltage monitor IICLCD1602 LCD module .
Product parameters:
1, the voltage input range : DC0-25V
2 , the voltage detection range : DC0.02445V-25V
3, the voltage analog resolution : 0.00489V
4, DC input interface : red positive terminal connected to VCC, GND negative pole
Related Products
-
Thermocouple Temperature Sensor Module MAX31855K
₦ 3,000The MAX31855 is cold junction compensation, K, J, N, T or E type thermocouple signal into a digital value. The device outputs data 14 signed by SPITM compatible interface, in read-only format. Converter temperature resolution of 0.25 ?, the highest temperature reading of +1800 ?, the lowest temperature reading of -270 ?, the K-type thermocouple, a temperature range of -200 ? to + 700 ?, maintaining accuracy ±2 ?.
Can the device be used in a temperature regulated and sensing projects and applications to detect temperatures up to 1,800?
3.3 to 5V power supply and logic level compliant
SPI data output requires any 3 digital I/O pins.
-200°C to +1350°C output in 0.25-degree increments – note that K thermocouples have about ±2°C to ±6°C accuracy
Internal temperature reading.Qucik View -
Rain Sensor – Arduino Compatible
₦ 1,500This rain sensor can be used for all kinds of weather monitoring, and translated into digital output signals and analog. Humidity Detection Sensor Module Snow Rain raindrops Detection for Arduino
- Sensitivity can be adjusted via potentiometer LED lights up when there is no rain output is high; as soon as raindrop is detected, the output goes to ground level (0V).
- Connect to the microcontroller/Arduino ADC port to detect the size of the drops in the above rainfall. DO TTL digital outputs can also be connected to the microcontroller detects whether there is rain.
- Digital outputs (0 and 1) and analog AO voltage output; TTL-level output, TTL output valid signal is low. Driving capability 100MA so, can directly drive relays, buzzer or small fan.
Pin functions include:
- VCC(3V to 5V)
- GND
- AO (Analog Output)
- Digital Output (TTL levels)
Package Includes:
- Rain sensing pad
- Sensing PCB
- Dupont cable
Qucik View -
HB100 Motion Detection Microwave Sensor Module
₦ 3,500This is a X-Band Bi-Static Doppler transceiver module. This module can be used to detect motion in projects relating to home automation, automatic doors, alarm systems and even vehicle speed detection.
Feature
Transmission frequency: 10.525 GHz
Frequency Setting Accuracy: 3MHz
Output power (minimum): 13dBm EIRP
Operating voltage: 5V 0.25V
Operating Current (CW): 60mA max., 37mA typical
harmonic emission: <-10dBm
Pulse mode:
Averagecurrent (5% DC): 2mA
Pulse Width (Min.): 5uSec
load cycles (Min.): 1%Qucik View -
Type K Thermocouple
₦ 2,500A device for measuring temperature
- Type: K / E (Optional)
- Probe Material: Stainless Steel
- Temperature Range: 0~400 degrees Celsius
Qucik View -
F249 Infrared Motor Speed Sensor Module
₦ 1,500Qucik View -
KY-031 Percussion Knock Sensor – Arduino Compatible
₦ 1,500This module is a knock sensor. It sends out signals which can be read with a microcontroller like Arduino. It is suitable for building projects like electronic drums, and sensing other kinds of vibration. It can be used in anti-theft projects and noise detection systems.
- Working voltage: 5V
- 3 Pinout: 5V, GND, Vout
- Size: 30*20mm
- Weight: 3g
Qucik View
MQ-8 Hydrogen Gas Sensor - Arduino Compatible
Reviews
There are no reviews yet.