Only logged in customers who have purchased this product may leave a review.
USB to UART Cable – PL2303
USB to UART Cable – PL2303
₦ 4,000
The Prolific PL2303 USB-TTL serial converter cable allows you to interface to TTL level devices directly from your PC.
PINOUT
- Red: +5 V
- Black: GND
- Green: Tx
- White: Rx
Related Products
-
0 out of 5
TTL To RS485 Serial Converter Module
₦ 2,000Description:
This is a module that allows the TTL interface of the microcontroller to be transferred to the RS485 module. It is generally used for industrial automation. This module adds lightning protection design and anti-jamming design. When you use it in the field and carry out long distance transmission, you can Connect the GND end of the module to the ground so that lightning protection and anti-interference can be achieved.
It uses a standard 2.54 mm pitch design. If you want to make the second development will be more convenient. It has 120 ohm matching resistance, shorted R0 can, it is recommended that users in the long distance transmission shorted.
It supports communication between multiple microcontrollers, allowing up to 128 devices on the bus. It can be hot-swappable, in order to prevent signal interference, it carried out a large area of copper, the effect is very good.Features:
- 3.3V perfectly compatible with 5.0V power supply
- 3.3V and 5.0V signal perfectly compatible
- Working temperature range: -40 C to + 85 C
- Transmission distance up to kilometers (with 850 meters of 2 * 1.5 cable to do the test, it is recommended to use in the 800 meters, more than 800 meters, please add repeaters)
- Semi-hole process design, the thickness of 0.8mm, makes it easy to use as a combo board, it can also be welded terminal use
- Has RXD, TXD signal lights to observe send and receive status
Specifications:
- Operating voltage: compatible with 3.3V and 5.0V
- Support baud rate: 110-256000bps
- Operating temperature: -40 Celsius to +85 Celsius
- Communication signal: compatible with 3.3V and 5.0V
Package Includes:
- 1 x TTL to RS485 Serial Converter Module
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
USB to UART 5- Pin CP2102 Module Serial Converter
₦ 2,500A MUST HAVE FOR EVERY ELECTRONICS AND EMBEDDED SYSTEMS ENGINEER
TALK DIRECTLY TO MICROCONTROLLERS, GSM MODULE, GPS MODULES, BLUETOOTH AND MANY MORE VIA UART/RS232
This is a USB 2.0 to 3.3V TTL UART 5 Pin CP 2102 Module Serial Converter
Connect MCU easily to your computer
Stable and reliable chip set CP2102 USB specifications
2.0 compliant with full-speed 12Mbps
Standard USB type A male and TTL 5 Pin connector
5 pins for TXD RXD GND 3.3V 5V.
All handshaking and modem interface signals.
Baud rate: 300bps to 1.5 Mbps.
Byte receive buffer: 640 byte transmit buffer.
Hardware or X-On/X-Off handshaking support.
Event character support Line break transmission.
USB suspend states supported via SUSPEND pins.
Temperature Range : -40 to + 85
Supports windows 98, Vista, Mac OS 9, Mac OS X & Linux 2.40
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
AVR Programmer USB-ASP
₦ 9,500USBasp is a USB in-circuit programmer for Atmel AVR controllers. No special drivers required.
Key Features:
- Read or write the microcontroller EEPROM, firmware.
- Support for Windows, Mac OS X and Linux (will work on Windows 8.1)
- 5 KB/sec maximum write speed
- Software controlled SCK option to support targets with low clock speed (< 1.5MHz)
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
3V to 5V USB Output Charger Step up Power Module
₦ 2,000This module is used as a DC-DC booster, converting 3V to 5V. With the aid of this board, you can charge your mobile phones and power other kinds of USB devices from power sources with voltage as little as 1.5V such as batteries.
- Non-isolated step-up module (BOOST)
- Input voltage: 1-5V
- Output voltage: 5.1-5 .2 V
- Output Current: Rated 1A-1.5A
- Efficiency: Up to 96% (the higher the input voltage, the higher the efficiency)
- Switching frequency: 500KHz
- Output ripple: 30mV (MAX) 20M bandwidth (input 4V output 5.1V 1A)
- Voltage indication: LED lights with load (input voltage less than 2.7V LED indicator off)
- Operating Temperature: Industrial (-40°c to +85°c)
- Full load temperature rise: 30°c
- Quiescent Current: 130uA
- Load regulation: ± 1%
- Voltage regulation: ± 0.5%
- Dynamic response speed: 5% 200uS
- Short circuit protection: None (Please use the lithium battery with protection.)
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
Mini HDMI to HDMI Adapter
₦ 2,250- Brand new and high quality.
- Connector: HDMI female to Mini HDMI male.
- Support resolution up to 1080P.
- Use this adaptor to convert one end of a standard HDMI cable to a mini HDMI male.
- Gold plated connectors, strain relief and foil shielding.
- Color: Black.
Package Included:
- 1 x HDMI Female to Mini HDMI Male Adapter.
NO Retail Box. Packed Safely in Bubble Bag
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
Dual USB Output 9V / 12V / 24V / 36V 5V DC-DC Power Supply Module
₦ 2,500This is Dual USB Output 9V / 12V / 24V / 36V Car Charger Switch 5V DC-DC Power Supply Module 3A Buck Regulator, a combo of 3A Charger and voltage checker.
The module converts input of 6-40V into a very stable 5V 3A output. The device features a 2 USB port through which you can charge your phone. While charging your device please consider that the output of this device is regulated at 5V 3A.
Simply connect this device to the power supply, the voltage can be detected in real time. When you need the phone, IPAD, MP3 and other digital products to charge, connect it to a power supply and it will start supplying 5V 3A at its output.
You can use this device which features 2 USB ports in Mobile Phones, flat-panel USB 5V powered devices and many more.
Features :
- High efficiency and low ripple.
- With USB power indicator light.
- Maximum output 3A (at the same time with two mobile phones).
- Small and handy module.
- Easy to use.
Specifications:
Input Voltage (V) 6 to 40 Output Voltage(V) 5 Output Current(A) 3 Efficiency 90%. Switching Frequency (KHz) 150 Operating Temperature (°C) -40 to +90 Length (mm) 57 Width (mm) 19 Height (mm) 19 Weight (gm) 20 Package Includes :
- 1 x Dual USB Output Car Charger Switch 5V DC-DC Power Supply Module
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View
Reviews
There are no reviews yet.