Only logged in customers who have purchased this product may leave a review.
Ultra Sonic Sensor
Ultra Sonic Sensor
₦ 2,500
Ultrasonic range sensor capable of 2cm – 400cm non-contact measurement with accuracy of up to 3mm.
SR-04 Technical Features:
- 5V Operating voltage
- 15mA Operating current
- 40kHz Ultrasonic pulse
- 45*20*15 mm
The modules four leads are as follows:
- 5V Supply
- Trigger Pulse Input
- Echo Pulse Output
- Ground
Related Products
-
0 out of 5
PIR Motion Sensor
₦ 2,500This PIR motion sensor detects live moving objects such as humans or pets. It produces a 3.3V output for (5-200 seconds) to indicate presence of live moving object. It can be used to control lights, security detection, home automation, etc
- 5-12V Operating Voltage
- 3.3 V /Low 0V
- Adjustable sensitiity
- Variable trigger length (5-200 seconds)
- Repeated trigger (L position) or Single trigger (H position) setting
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
W1219 Thermostat Temperature Controller Switch Module + Waterproof NTC Sensor Module
₦ 6,500A digital temperature controller module with dual LED display and an inbuilt relay module for control. The cut-off temperature is set with buttons on board
- Control Range:-50~110 Celsius
- Control Precision:0.1 Celsius
- Measuring Input: NTC10K waterproof sensor L=0.5m
- High Temperature Alarm:-49~110 Celsius
- Input Voltage: DC 12V
- Output Type: relay output 10A (max)
- Return Difference Setting:0.1~30 degree Celsius
- Delay Starting:0-10min
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
Thermistor Infrared Thermal Sensor Module
₦ 1,500This temperature detection module senses ambient temperature and produces a corresponding output. This module can be used in automatic temperature regulation projects
Features
- Operating Voltage 3.3V-5V
- NTC thermistor sensor
- Thermistor output drives up to 15mA directly
- Adjustable temperature sensitivity
- Analog output (AO pin)
- Digital output with adjustable threshold and LED indicator (DO pin)
- Mounting hole
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
Bosch BMP180 Barometer Pressure/Temperature/Altitude Sensor (Arduino Compatible)
₦ 1,500The BMP180 is a precision barometric pressure, temperature and altitude sensor from manufactured by Bosch. It is fully compatible with BMP085 in terms of firmware/software/interfacing. BMP180 can easily be configured to work with Arduino, ARM or PIC over I2C.
Specification
- 3-5V Logic and Power
- Pressure sensing range: 300-1100 hPa (9000m to -500m above sea level)
- Up to 0.03hPa / 0.25m resolution
- -40 to +85°C operational range, +-2°C temperature accuracy
- This board/chip uses I2C 7-bit address 0x77.
Arduino sample code: //www.haoyuelectronics.com/Attachment/GY-68/bmp085_arduino.zip
Datasheet: //cdn-shop.adafruit.com/datasheets/BST-BMP180-DS000-09.pdf
Product InformationBrandProduct added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
Thermocouple Temperature Sensor Module MAX31855K
₦ 3,000The MAX31855 is cold junction compensation, K, J, N, T or E type thermocouple signal into a digital value. The device outputs data 14 signed by SPITM compatible interface, in read-only format. Converter temperature resolution of 0.25 ?, the highest temperature reading of +1800 ?, the lowest temperature reading of -270 ?, the K-type thermocouple, a temperature range of -200 ? to + 700 ?, maintaining accuracy ±2 ?.
Can the device be used in a temperature regulated and sensing projects and applications to detect temperatures up to 1,800?
3.3 to 5V power supply and logic level compliant
SPI data output requires any 3 digital I/O pins.
-200°C to +1350°C output in 0.25-degree increments – note that K thermocouples have about ±2°C to ±6°C accuracy
Internal temperature reading.Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
Photosensitive Resistance Sensor Module
₦ 1,500This photosensitive resistive sensor module is handy in home automation and solar applications. The sensitivity can be varied using the potentiometer. Additionally, it is capable of driving up to 15mA.
Features
- Operating voltage of 3.3 V to 5 V
- DO digital switch output (0 and 1) and AO analog voltage output
- Adjustable senstivity
+ power supply positive
– connect power cathode
DO TTL switch signal output
AO analog signal outputProduct added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View
Reviews
There are no reviews yet.