Only logged in customers who have purchased this product may leave a review.
STM8S103F3P6 Mini Dev Board
- You cannot add "Mini USB 5V USB to 3.3V DC Power Outlet" to the cart because the product is out of stock.
STM8S103F3P6 Mini Dev Board
₦ 1,500
This STM8S103 Minimum development board is suitable for STM8 enthusiast. It packs a lot of power in a very small package.
- 16 MHz advanced STM8 core with Harvard architecture and 3-stage pipeline
- RAM: 1 Kbyte
- 2.95 to 5.5 V operating voltage
- Internal, user-trimmable 16 MHz RC
- Internal low-power 128 kHz RC
- On-board 5V Regulator.
- Can be powered by 5V USB port
- Support SWIM programming.
- 2 Built-In LEDs Power and GPIO on pin PD3 (This should flash when you power it up)
- On board reset button
- 8K Flash Memory
- 640 bytes EEPROM
- Reflash up to 10K times
Out of stock
Related Products
-
0 out of 5
ST-Link V2 STM8/STM32 Programmer & Emulator
₦ 10,000This pocket friendly USB programmer and debugger allows STM8 and STM32 (ARM) microcontrollers to be programmed and debugged.
Product Features:
- Support for all the STM8 devices via SWIM interface
- Support for all STM32 devices with SWD interface
- Debugging : run at full-speed, single-stepped, breakpoints, viewing variables and registers, etc.
- Programming : supports FLASH ROM, EEPROM, AFR, etc.
- Onboard 500mA self-recovery fuse to avoid harming by short circuit
- Dual voltage output (3.3V/5V), easy for debugging/programming
- Standard USB interface to PC
- USB2.0 combined with SWIM/SWD interfaces : quick response for debugging & fast speed for programming
- Upgradable firmware
The board supports any of the following softwares:
- ST – LINK Utility 2.0 and above
- STVD 2 and above
- STVP 3.2.3 and above
- IAR EWARM V6.20 and above
- IAR EWSTM8 V1.30 and above
- KEIL RVMDK V4.21 and above
- ATOLLIC
- TASKING
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
Class D High Power Digital Amplifier Board – TDA7492 -2 x 50W
₦ 15,000A powerful amplifier with 50W output on 2 channels, this board allows a very powerful output to be delivered from a single rail power supply.
- Power supply: Single Supply 10-26V DC voltage
- The Maximum power: 50W per channel (8 Ohm)
- Mono power 100W (4 Ohms)
- Size: 57 mm * 70mm * 21 mm
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
Dual USB Power Bank Board with LCD Display
₦ 2,500Dual USB battery charger with a built in LCD module for visual feedback
Features
-
- Micro USB input: 5V 1A
- USB Output: 5V 2.1A / 5V 1A(Dual USB interface)
- Charging display: LCD
- Batteries Type: Lithium-ion batteries (18650)
- Product Size: 57mm x 28mm
- Screen size:27mm x 17mm
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
-
0 out of 5
Single Sided A4 Copper Clad PCB Board
₦ 1,500These low cost Single-sided copper-clad printed circuit board made from paper-based material. They are very useful when making simple single sided prototype boards.
- Great for prototypes and short run PCB
- low-cost printed circuit board.
- Easy to drill and cut.
- Suitable etchant ferric chloride solution.
- 210 × 297mm
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
Mini Breadboard
₦ 1,000The solderless breadboard (generally a large, white, plastic component with rows and columns of holes) provides a working space where temporary circuits can easily be built1. Leads of electrical components (e.g. resistors) can easily be pushed into the breadboard holes.
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
ELM327 Mini – Bluetooth OBD-II Diagnostics Protocol Scanner – CD Included
₦ 7,000The ELM327 Bluetooth Scanner allows you to scan and disagnose OBD-II protocols and display over 3000 generic code definitions in the database. Clear trouble codes and turn off the MIL (“Check Engine” Light)
Features
- Works with all OBD-II compliant vehicles (essentially all modern vehicles)
- Wireless (Bluetooth)
- Software included for Palm, PDA
- Software included for Windows PC
- Software included for Windows Smartphone
- Supports CAN bus
- Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).
- Clear trouble codes and turn off the MIL (“Check Engine” light)
- Display current sensor data, including:
- Engine RPM
- Calculated Load Value
- Coolant Temperature
- Fuel System Status
- Vehicle Speed
- Short Term Fuel Trim
- Long Term Fuel Trim
- Intake Manifold Pressure
- Timing Advance
- Intake Air Temperature
- Air Flow Rate
- Absolute Throttle Position
- Oxygen sensor voltages/associated short term fuel trims
- Fuel System status
- Fuel Pressure
- Many more
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View
Reviews
There are no reviews yet.