Only logged in customers who have purchased this product may leave a review.
SMD to DIP Adapter (QFP, TQFP, FQFP, LQFP)
₦ 1,000
This SMD Adapter let’s you solder 0.5mm and 0.8mm SMD Integrated Circuits (IC) such as Atmel, MSP, STC and Microchip microcontrollers
- 0.5mm and 0.8mm on opposite sides
- 32-100 pin SMD components
- 0.8mm side allows mounting of 32 to 64 pin components
- 0.5mm side allows mounting of 32 to 100 pin components
- Applicable to common package: QFP, TQFP, FQFP, LQFP, etc.
- Size: 38 * 46mm
1 in stock
Related Products
-
Resistor Value Pack – 22 Values
₦ 2,000This 22 Value resistor pack contains most of the resistors you will need 10 pieces each of resistors ranging from 10Ω to 10MΩ
- 10Ω
- 22Ω
- 47Ω
- 100Ω
- 220Ω
- 330Ω
- 470Ω
- 680Ω
- 1kΩ
- 2.2kΩ
- 4.7kΩ
- 6.8kΩ
- 10kΩ
- 22kΩ
- 47kΩ
- 68kΩ
- 100kΩ
- 220kΩ
- 470kΩ
- 680kΩ
- 1MΩ
- 10MΩ
Qucik View -
Transciever & Adapter Board NRF2401+
₦ 3,000The ubiquitous NRF24L01+ Module which is capable of short and medium range transmission of up to 2Mbps operates at 3.3V. This can be inconvenient for most engineers. Therefore, we have bunduled the module together with an adapter board to make things much easier
Qucik View -
Stepper Motor – Nema 17 + A4988 Driver
₦ 14,000This stepper motor is perfect for robotics, 3D printer and other kinds of high precision projects. 1.8° per step smooth motion. The included A4988 motor driver allows you to safely, quickly and accurately working with the motor.
- 200 steps/rev
- 12V Operating Voltage
- 350mA (Max Current)
- 1.8 degrees per step
- Bipolar stepper motor
- 20 N*cm, 2 Kg*cm holding torque per phase
- 35 ohms per winding
- 42mm X 42mm square body -M3 Mounting Screws
Qucik View -
Class D High Power Digital Amplifier Board – TDA7492 -2 x 50W
₦ 10,000A powerful amplifier with 50W output on 2 channels, this board allows a very powerful output to be delivered from a single rail power supply.
- Power supply: Single Supply 10-26V DC voltage
- The Maximum power: 50W per channel (8 Ohm)
- Mono power 100W (4 Ohms)
- Size: 57 mm * 70mm * 21 mm
Qucik View -
Micro USB to DIP Adapter- Pair
₦ 1,000These Micro USB to DIP converter boards allow easy connection of a microcontroller or arduino to a PC using standard USB interface.
It may also be used to power a device over the USB port
- 3cm x 3cm x 3cm
Qucik View -
5 Red LEDs + 5 Resistors
₦ 6005 Red LED with 5 330 Ohm resistors. With these, all that needs to be done is connect to Microcontroller or Arduino GPIO pins. Works fine for 5V or 3V circuits
Qucik View
Reviews
There are no reviews yet.