The SIM800L Quad-band Network Mini GPRS GSM Breakout Module is based on SIM800L module, supports quad-band GSM/GPRS network, available for GPRS and SMS message data remote transmission. The board features compact size and low current consumption. With power saving technique, the current consumption is as low as 1mA in sleep mode. It communicates with the microcontroller via UART port, supports command including 3GPP TS 27.007, 27.005 and SIMCOM enhanced AT Commands.
SIM800L GSM/GPRS Module V2.0
₦ 6,500
Out of stock
The SIM800L Quad-band Network Mini GPRS GSM Breakout Module is based on SIM800L module, supports quad-band GSM/GPRS network, available for GPRS and SMS message data remote transmission. The board features compact size and low current consumption. With power saving technique, the current consumption is as low as 1mA in sleep mode. It communicates with the microcontroller via UART port, supports command including 3GPP TS 27.007, 27.005 and SIMCOM enhanced AT Commands.
Features:
- Quad-band 850/900/1800/1900MHz
- Send and receive SMS messages
- Scan and receive FM radio broadcasts
- Lead out buzzer and vibrational motor control port
- AT command interface with “Auto baud” detection
Technical Specifications:
- Supply Voltage: 3.7V ~ 5VDC
- Power Saving: Sleep mode 0.7mA (AT+CFUN=0)
- Frequency Bands: Quad-Band: GSM850, EGSM900, DCS1800, PCS1900
- Transmitting Power
- Class 4 (2W) at GSM850, EGSM900
- Class 1 (1W) at DCS1800, PCS1900
- GPRS Connectivity
- GPRS Multi-Slot Class 12 (Default)
- GPRS Multi-Slot Class 1-12 (Option)
- Temperature Range: -40 to +85 °C
- Storage Temperature: -45 to +90 °C
- Data GPRS
- GPRS Data down-link transfer max: 85.6 kbps
- GPRS Data up-link transfer max: 85.6 kbps
- Coding Scheme: CS-1, CS-2, CS-3 and CS-4
- PAP Protocol for PPP connect
- Integrate TCP/IP Protocol
- Support Packet Broadcast Control Channel (PBCCH)
- CSD Transmission Rates: 2.4, 4.8, 9.6, 14.4 kbps
Related Products
-
A6 GSM & GPRS Module
₦ 13,000A module that supports dual-band GSM/GPRS network, available for GPRS and SMS. Comes ready to keep your project connected via phone calls, SMS, or the Internet.
- Working frequency: quad-band network, 850 / 900 / 1800 / 1900MHz
- Working voltage: 4.5~5.5V DC (On-board voltage regulator circuit supply power for A6 module)
- Working current: maximum of 2A
- Sleep current: 5mA
- Onboard Micro SIM card holder, you can install Micro SIM card
- Onboard Micro USB interface for external power supply
- Communication Interface: TTL serial port
- Baud rate: 115200bps and it can also be set by AT command.
- Interface logic voltage: 3.3V
- Make and answer phone calls using a headset and electret microphone.
- Send and receive SMS messages.
- Send and receive GPRS data (TCP/IP, HTTP, etc.)
Qucik View -
Arduino Single Channel Relay Module 5V/10A
₦ 1,500This product is a 1-channel relay module board with LED indicators, It can be controlled by microcontrollers such as Arduino, AVR, PIC, ARM any other microcontroller operating at 5V.
With this relay you can easily control electrical appliances, lights, etc.
Features
-
- Diode protected input
- This relay module is 5V active low.
- It is an 1-channel relay interface board, which can be controlled directly by a wide range of microcontrollers.
- It is also able to control various appliances and other equipment with large current.
- Relay output maximum contact is AC250V 10A and DC30V 10A.
- Can be connected directly to microcontoller GPIO pins.
- Working status indicator lights are conducive to the safe use.
Qucik View -
-
4-Channel Relay Module
₦ 4,500The 4-channel relay module is able to switch up to 250A 10A and can be easily applied to home automation and control applications.
Uses:
- Supports all MCUs and Arduino Modules
- Easy connection
- Simple 5V Operation
- Very handy for home automation and control applications
Qucik View -
F249 Infrared Motor Speed Sensor Module
₦ 1,500Qucik View -
Arduino Dual-axis XY Joystick Module
₦ 1,500A joystick module which can be interfaced with a microcontroller like Arduino. It can be used in your robotics projects
-
- Dual-axis XY Joystick Module for Arduino
- Size: 4 X 2.6 X 3.2CM
- 2 potentiometers for 2 axes
- 1 switch
- Working voltage: 5V
Qucik View -
-
CP2102 MICRO USB to UART TTL Module
₦ 1,5005A constant current LED driver and charger for lithium-ion battery
· 3.3V and 5V voltage output
· Supports baud rates from 300bps ~ 1Mbps
On-chip voltage regulator output voltage 3.3V
Supports data formats for 8 data bits, 1 stop bit and parity bits
Connotation 512 byte receive buffer and 512 byte transmit buffer
Support for hardware or X-ON / X-OFF handshakeQucik View
XL6009 Adjustable DC-DC Booster Power Supply Module