Only logged in customers who have purchased this product may leave a review.
RFID Kit – 13MHz RC522
RFID Kit – 13MHz RC522
₦ 2,500
RC522 is a 13.56 MHz RFID reader writer module which easy to use and low cost. It can be easily hooked up to Arduino or other microcontroller (e.g. PIC, Atmel or ARM) via SPI. This kit comes with two tags so you can begin prototyping right away.
Useful for making access control for locks, vehicle anti-theft, attendance systems, etc.
The RC522 has full support for Arduino: //playground.arduino.cc/Learning/MFRC522
- Operating current :13-26mA/DC 3.3V
- Idle current :10-13mA/DC 3.3V
- SPI communication (Industry standard)
- Sleep current: less than 80uA
- Peak current: less than 30mA
- Operating Frequency: 13.56MHz
Related Products
-
0 out of 5
CH340 USB To ESP8266 ESP-01 ESP-01S Wi-Fi Adapter Board
₦ 6,250Description:
- USB to ESP-01 adapter module has CH340G USB to TTL driver IC onboard, so you can easily use your computer to do ESP-01 functional debugging.
- Its a great programmer for the ESP-01. Its very easy to just plug it in and send AT commands, or flip the switch to program and upload a sketch from Arduino IDE. Also you don’t need a separate 3.3V power supply to power the ESP-01.
Features:
- Working voltage: 4.5V – 5.5V (On-board 3.3v LDO Regulator)
- Working current: 300mA(LDO regulator can supply)
- Selectable working mode: On-board toggle switch. UART side for serial TTL debugging by AT commands, PROG for firmware programming
- USB to serial TTL chip: CH340G
- Logic level: 3.3V
- Applications: Home automation, Sensor networks, Industrial wireless control, etc,.
Package Included:
1 X CH340 USB to ESP8266 ESP-01 ESP-01S Wi-Fi Adapter Board
Other Comments:
- 1. The ESP-01 boards are super-simplified ESP8266 and these allow for flashing during development.
- 2. This little gadget makes programming the ESP 01s a breeze. It’s a must have for installing firmware.
- 3. Not at all my first programmer for these boards, but the easiest by a landslide! No buttons to hold down or wiring to do.
- 4. This worked, didn’t try the debug ger but the upload was flawless, very easy and it didn’t seem like it would break even when I stored it in tight confines. Please make sure to set your baud to at least 115200 yes the USB will work either way, but the extra speed will help you.
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
JT308 USB RFID Card Reader
₦ 14,250The PN532 is a widely used and supported NFC chip. This module will allow you to add NFC and RFID functionality to your project, allowing you to interact with phones, read and write NFC tags and RFID tags.
Features
- Typical Operating Distance have been updated to 5cm~7cm reading distance
- Work in NFC Mode or RFID reader/writer Mode
- RFID reader/writer supports:
- Mifare 1k, 4k, Ultralight, and DesFire cards
- ISO/IEC 14443-4 cards such as CD97BX, CD light, Desfire, P5CN072 (SMX)
- Innovision Jewel cards such as IRT5001 card
- FeliCa cards such as RCS_860 and RCS_854
- Plug and play, Arduino compatible
- Built in PCB Antenna, with 4cm~6cm communication distance
- On-board level shifter, Standard 5V TTL for I2C and UART, 3.3V TTL SPI
- Work as RFID reader/writer
- Work as 1443-A card or a virtual card
- Exchange data with other NFC devices such as smartphone
Package contains
- 1 PN532 NFC RFID Module
- 1 dupont cable Male-Male
- 1 Mifare S50 White Card
- 1 Mifare One S50 Key Ring
- 1 12P bent header pin
Arduino Library: //github.com/adafruit/Adafruit-PN532
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
Transciever & Adapter Board NRF2401+
₦ 3,000The ubiquitous NRF24L01+ Module which is capable of short and medium range transmission of up to 2Mbps operates at 3.3V. This can be inconvenient for most engineers. Therefore, we have bunduled the module together with an adapter board to make things much easier
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
CH340G RS232 to TTL Serial Port Module
₦ 3,000Description:
USB To RS232 TTL CH340G Converter Module Upgrade 5v 3.3v Serial Port Module PL2303
USB to TTL CH340 module instead of PL2303 , CH340G RS232 to TTL module upgrade USB to serial port in nine Brush small plates
Features:
- Brand New original CH340G chips, the chips are STC official recommendation USB to TTL chips will not appear due to a different drive / different computer as a result of incompatibilities
- Golden appearance, quality and upscale yellow pin, pin durable than the black market, beautiful
- Not only have the power light PWR, TXD and RXD LEDs also reserved RTS, CTS location convenient and intuitive know whether the product is at work in the absence of the instrument case
- 3V3 and 5V by a short circuit risk selection
Compatibility:
- Support WINDOWS 98 / ME / 2000 / XP / Server 2003 / VISTA / Server 2008 / Win7 / Win8 32 Bit / 64
Content:
- 1pcs CH340G Module
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
SIM808 GSM GPRS + GPS Module
₦ 20,500SIM808 module is a complete Quad-Band GSM/GPRS module which combines GPS technology for satellite navigation. The compact design which integrated GPRS and GPS in a SMT package will significantly save both time and costs for customers to develop GPS enabled applications. Featuring an industry-standard interface and GPS function, it allows variable assets to be tracked seamlessly at any location and anytime with signal coverage.
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
Adapter Board NRF24L01
₦ 1,500This board allows the NRF24L01 and NRF24L01+ Chip to be more easily interfaced with any 5V microcontroller.
You can get the NRF2401+ Chip from us at //www.konga.com/nrf-240lo1-2-4ghz-wireless-transciever-1988792
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View
Reviews
There are no reviews yet.