Only logged in customers who have purchased this product may leave a review.
Raspberry Pi Micro HDMI To HDMI Cable – 1.5M
Raspberry Pi Micro HDMI To HDMI Cable – 1.5M
₦ 5,000
HDMI To HDMI Cable 1.5 Meters High Quality 4K@60 Full HD support
HDMI (High-Definition Multimedia Interface) is a compact audio/video interface for transferring uncompressed video data and compressed/uncompressed digital audio data from a HDMI-compliant device (“the source device”) to a compatible computer monitor, video projector, digital television, or digital audio device etc. HDMI is a digital replacement for existing analog video standards. some more features of HDMI cable are :
High speed data transfer.
No any software requirement.
Undermould shield helps to prevent radio frequency and 2 elector magnetic interference.
Support for 1.4 V display technologies.
Gold plated copper cntacts provide maximum conductivity and minimizes data loss.
Connectors: HDMI M TO M.
No external power requirements.
Transfer Digital Audio & Video signals at warp speed of 10.2 Gigabytes per second.
HDMI to HDMI cable is suitable for use in HDTV, Home Theater, DVD player, projector, PS3, XBox, Audio/video receiver, LCD Display and other HDMI devices .
Length – 1.5M
Related Products
-
0 out of 5
I2C LCD Converter Module
₦ 2,000Description:-
I2C Module has a inbuilt PCF8574 I2C chip that converts I2C serial data to parallel data for the LCD display.
These modules are currently supplied with a default I2C address of either 0x27 or 0x3F. To determine which version you have check the black I2C adaptor board on the underside of the module. If there a 3 sets of pads labelled A0, A1, & A2 then the default address will be 0x3F. If there are no pads the default address will be 0x27.
The module has a contrast adjustment pot on the underside of the display. This may require adjusting for the screen to display text correctly.
Features:-
- Operating Voltage: 5V
- Backlight and Contrast is adjusted by potentiometer
- Serial I2C control of LCD display using PCF8574
- Come with 2 IIC interface, which can be connected by Dupont Line or IIC dedicated cable
- Compatible for 16×2 LCD
- This is another great IIC/I2C/TWI/SPI Serial Interface
- With this I2C interface module, you will be able to realize data display via only 2 wires.
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
Raspberry Pi NoIR V2 Camera 8MP Night Vision Camera Module
₦ 42,500Introduction:
The official infrared camera module v2 (Pi NoIR) has a IMX219 8-megapixel sensor (better than the 5-megapixel OmniVision OV5647 sensor).
The Pi NoIR gives you everything the regular Camera Module offers, with one difference: it does not employ an infrared filter. (NoIR = No Infrared.) This means that pictures you take by daylight will look decidedly curious, but it gives you the ability to see in the dark with infrared lighting.
We bundle a little square of blue gel with the Pi NoIR, which you can use with the camera to monitor the health of green plants. The Pi NoIR is very popular among wildlife hobbyists: with a few infrared LEDs, you can monitor what nocturnal animals are doing in your garden without disturbing them.
The camera works with all models of Raspberry Pi 0 ,1, 2, 3 and 4. It can be accessed through the MMAL and V4L APIs, and there are numerous third-party libraries built for it, including the Picamera Python library. See the Getting Started with Picamera resource to learn how to use it.
Note , when use for Pi Zero , you need to prepare the special camera cable for Pi zero
Specifications:
1. Name : Original Official Raspberry Pi Infrared Camera V2
2. Pixel : 8MP
3. Sensor : IMX219
4. Night Vision : support night vision , need the infrared lights
5. Support Raspberry Pi 4 Model B/3B+/3A+/2B/Zero
Features:
1. IMX219 sensor with 8MP high pixel , better than other general 5MP OV5647 sensor Raspberry Pi camera , and it support 1080P.
2. It can take picture in the dark , need to use it with infrared light in dark. And in daylight it has not red light like other night vision camera.
3. High compatibility , suitable for all version of Raspberry Pi ( when use for Pi Zero , you need to prepare extra camera cable for it ) . It also suitable for Nvidia Jetson Nano.
Package Includes:
1 x Official Raspberry Pi Infrared Night Vision CameraV2
1 x 15cm FFC
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
USB to UART 5- Pin CP2102 Module Serial Converter
₦ 2,500A MUST HAVE FOR EVERY ELECTRONICS AND EMBEDDED SYSTEMS ENGINEER
TALK DIRECTLY TO MICROCONTROLLERS, GSM MODULE, GPS MODULES, BLUETOOTH AND MANY MORE VIA UART/RS232
This is a USB 2.0 to 3.3V TTL UART 5 Pin CP 2102 Module Serial Converter
Connect MCU easily to your computer
Stable and reliable chip set CP2102 USB specifications
2.0 compliant with full-speed 12Mbps
Standard USB type A male and TTL 5 Pin connector
5 pins for TXD RXD GND 3.3V 5V.
All handshaking and modem interface signals.
Baud rate: 300bps to 1.5 Mbps.
Byte receive buffer: 640 byte transmit buffer.
Hardware or X-On/X-Off handshaking support.
Event character support Line break transmission.
USB suspend states supported via SUSPEND pins.
Temperature Range : -40 to + 85
Supports windows 98, Vista, Mac OS 9, Mac OS X & Linux 2.40
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
TTL To RS485 Serial Converter Module
₦ 2,000Description:
This is a module that allows the TTL interface of the microcontroller to be transferred to the RS485 module. It is generally used for industrial automation. This module adds lightning protection design and anti-jamming design. When you use it in the field and carry out long distance transmission, you can Connect the GND end of the module to the ground so that lightning protection and anti-interference can be achieved.
It uses a standard 2.54 mm pitch design. If you want to make the second development will be more convenient. It has 120 ohm matching resistance, shorted R0 can, it is recommended that users in the long distance transmission shorted.
It supports communication between multiple microcontrollers, allowing up to 128 devices on the bus. It can be hot-swappable, in order to prevent signal interference, it carried out a large area of copper, the effect is very good.Features:
- 3.3V perfectly compatible with 5.0V power supply
- 3.3V and 5.0V signal perfectly compatible
- Working temperature range: -40 C to + 85 C
- Transmission distance up to kilometers (with 850 meters of 2 * 1.5 cable to do the test, it is recommended to use in the 800 meters, more than 800 meters, please add repeaters)
- Semi-hole process design, the thickness of 0.8mm, makes it easy to use as a combo board, it can also be welded terminal use
- Has RXD, TXD signal lights to observe send and receive status
Specifications:
- Operating voltage: compatible with 3.3V and 5.0V
- Support baud rate: 110-256000bps
- Operating temperature: -40 Celsius to +85 Celsius
- Communication signal: compatible with 3.3V and 5.0V
Package Includes:
- 1 x TTL to RS485 Serial Converter Module
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
Bi-Directional 4 Channel Logic Level Converter
₦ 2,500This tiny logic level shifter features four bidirectional channels, allowing for safe and easy communication between devices operating at different logic levels. It can convert signals as low as 1.5 V to as high as 18 V and vice versa, and its four channels are enough to support most common bidirectional and unidirectional digital interfaces, including I²C, SPI, and asynchronous TTL serial.
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
Mini HDMI to HDMI Adapter
₦ 2,250- Brand new and high quality.
- Connector: HDMI female to Mini HDMI male.
- Support resolution up to 1080P.
- Use this adaptor to convert one end of a standard HDMI cable to a mini HDMI male.
- Gold plated connectors, strain relief and foil shielding.
- Color: Black.
Package Included:
- 1 x HDMI Female to Mini HDMI Male Adapter.
NO Retail Box. Packed Safely in Bubble Bag
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View
Reviews
There are no reviews yet.