Only logged in customers who have purchased this product may leave a review.
Raspberry Pi Camera
Raspberry Pi Camera
₦ 10,000
This Raspberry Pi Camera Module plugs directly into the Raspberry Pi board. Allowing crystal clear 5 Mega Pixel Images to be taken, or 1080p HD Videos to be recorded.
Features
- Fully Compatible with Both the Model A and Model B Raspberry Pi
- 5MP Omnivision OV5647 Camera Module
- Still Picture Resolution: 2592 x 1944
- Video: Supports 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 Recording
- 15-pin MIPI Camera Serial Interface – Plugs Directly into the Raspberry Pi Board
- Size: 20 x 25 x 9mm
- Weight 3g
- Fully Compatible with many Raspberry Pi cases
Out of stock
Related Products
-
0 out of 5
Infrared Night Vision For Raspberry Pi Camera Module – 3W LED
₦ 4,500Description:
This is a 3W high-power 850 infrared light, adjustable resistance. Comes with an onboard adjustable resistor, for controlling the ambient light threshold of toggling the infrared LED. It allows adding night vision function to RPi cameras. You can use a small screwdriver to gently twist the variable resistor and adjust the ambient brightness to your preference. This infrared LED is a perfect addition for projects that require night vision.The LED light board and the camera PCB bottom plate can be screwed together to use (no software control is required. The working mode of the light board is that when the light is dark, the LED light is automatically turned on, and when the light is strong, the LED light is automatically turned off. The adjustable resistance on the light board needs to be adjusted. Our default delivery is not adjusted. Because different user uses the infrared LED at different locations, it will automatically turn on when it is connected by default. If no adjustment is made, the LED light will always be turned on. Bear in mind that since it is always turned on, it heats up pretty easily. It is recommended to stick a heatsink at the back of the infrared LED, on the cooling area (gold plate).
How to use:
- Connect the Infrared LED Board to the camera PCB with screws.
- The screw holes are used for both attachment and power supply.
- Adjust the adjustable resistor to set a proper ambient light threshold, which toggles the infrared LED automatically.
- When ambient light is lower than the threshold value, the infrared LED is on, vice versa.
Note: The 3W high-power infrared LED might cause the Pi to increase heating, heatsinks are suggested. The ideal imaging distance is within 3 meters. When the distance goes up to 6 meters, the night vision camera can just capture blurry outlines.
This 3W Infrared LED for RPi NoIR Camera Module is compatible with:
- Fish Eye Lens Raspberry Pi 5MP IR Camera
- 3.6mm Lens Raspberry Pi 5MP IR Camera
Features:
- Small size and Lightweight module.
- Easy to use.
- Operating Voltage: 5V
- Operating current: 2A~2.2A
- Power: 3W
Packing list:
- 1 x 3W Infrared LED for RPi NoIR Camera Module
- 1 x Screws and nuts set
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
Raspberry Pi 4 (8GB RAM)
₦ 200,000Dual-display, desktop computer and robot brains, smart home hub, media center, networked AI core, factory controller, and much more
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
Raspberry Pi 4 (2GB RAM)
₦ 150,000Dual-display, desktop computer and robot brains, smart home hub, media center, networked AI core, factory controller, and much more
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
Arduino Uno R3 + Camera Kit
₦ 20,000The Arduino uno and Arduino Camera (OV7670) allows images to be easily captured from an Arduino Uno. With this kit all kinds of photography and image capturing project. Live video can be viewed on and LCD.
Camera Features
- Optical size 1/6 inch
- Resolution 640×480 VGA
- Onboard regulator, only single 3.3V supply needed
- Standard 0.1inch (2.54mm) pin pitch header connector
- Mounted with high quality F1.8 / 6mm lens
- Output support for Raw RGB, RGB (GRB 4:2:2, RGB565/555/444), YUV (4:2:2) and YCbCr (4:2:2) formats
- High sensitivity for low-light operation
- Low operating voltage for embedded portable apps
- Standard SCCB interface compatible with I2C interface
- Supports LED and flash strobe mode
- Supports scaling
- Lens shading correction
- Flicker (50/60 Hz) auto detection
- Saturation level auto adjust (UV adjust)
- Edge enhancement level auto adjust
- De-noise level auto adjust
Arduino Uno Features
- Microcontroller: ATmega328.
- Operating Voltage: 5V.
- Input Voltage (recommended): 7-12V.
- Input Voltage (limits): 6-20V.
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6.
- DC Current per I/O Pin: 40 mA.
Kit Contains
- Arduino Uno R3.
- OV7670 Camera Module.
Product InformationBrandProduct added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
T-Cobbler
₦ 3,000The Raspberry Pi 40-GPIO pinned adapter board allows easy interfacing of the Raspberry Pi to a breadboard without the need for counting I/O pins. Simply plug and play.
Features
- Labelled I/O pins
- Breadboard friendly
- Compatible with all 40 pin Raspberry Pi (A+, Raspberry Pi Zero, B+)
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
Raspberry Pi 3 Case
₦ 4,000High quality ABS Raspberry Pi 3 case snugly protects your Raspberry Pi board.
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View
Reviews
There are no reviews yet.