Only logged in customers who have purchased this product may leave a review.
Printed Circuit Board Etch Resistant Marker Pen

Printed Circuit Board Etch Resistant Marker Pen
₦ 1,000
This two sided etch resist pen for fast fabrication of printed circuit boards. The ink adheres perfectly to copper and is completely resistant to ferric chloride and other usual etchant solutions. Draw the planned circuit onto a thoroughly cleaned copper laminated board and allow to dry. Then immerse the board in etching fluid until the copper is dissolved. The ink can then be removed with Degreasing Solvent or PCB Cleaner, and the circuit board is then ready to be drilled and assembled. This pen is capable of producing thin, delicate lines allowing for quite a condensed track layout if required.
It can also be used to correct broken tracks while making PCB using toner resist method
Available on backorder
Related Products
-
0 out of 5
Alligator Clips – 4 Pieces
₦ 1,000Alligator Clips come in handy for quick prototyping and establishing quick electrical connections without the need for solder.
This one ships with 4 pieces.
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
Push Pull Type Open Frame Solenoid Electromagnet 10mm 20N DC 12v/2A
₦ 7,000Pull type, open frame type, linear motion, open coil form, built-in mounting board, DC electromagnet. Used widely in banking ATM, home appliances,vending machines, game machine,auto door lock,electronic appliances, embroidery machines,intelligent lock, juice bread maker, textile machines, cash register or other automatic control devices etc. Supports DC 12V voltage, high power, push type, linear motion and easy to install.
Basically a solenoid consists of a coil with an associated iron circuit forming the fixed part. A moving plunger is pulled into this coil when it is energised.
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
Anet A8 3D Printer
₦ 300,000With a basic knowledge in 3D printing, the Anet DIY 3D printer is an easy way to get into 3D printing. The ANET A8 DIY 3D printer can be assembled without any prior technical knowledge since the connections are ready for plug and print with no need for soldering etc. Electronic installation manual are stored in the free SD card included in kit.
With a 220x220x240 mm printing volume, this 3D printer has an acrylic and metal frame ensuring a study structure that allows for precision printing to an accuracy of 0.1 to 0.12 millimetres.Its an upgraded A8 DIY i3 3D printer with new feature of auto self-levelling function, easy for operation.
2004 LCD screen, English interface, 5 keys for easy operation, support SD card and off-line printing.It has a customized MK8 nozzle with sophisticated technology to produce smooth filaments fluently.
T-shape lead screw, high quality stainless steel, more durable and sturdy for use.
Advanced and high-speed motor, continue to prolonged work hours for greatly improved the working efficiency.Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
ELM327 Mini – Bluetooth OBD-II Diagnostics Protocol Scanner – CD Included
₦ 6,500The ELM327 Bluetooth Scanner allows you to scan and disagnose OBD-II protocols and display over 3000 generic code definitions in the database. Clear trouble codes and turn off the MIL (“Check Engine” Light)
Features
- Works with all OBD-II compliant vehicles (essentially all modern vehicles)
- Wireless (Bluetooth)
- Software included for Palm, PDA
- Software included for Windows PC
- Software included for Windows Smartphone
- Supports CAN bus
- Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).
- Clear trouble codes and turn off the MIL (“Check Engine” light)
- Display current sensor data, including:
- Engine RPM
- Calculated Load Value
- Coolant Temperature
- Fuel System Status
- Vehicle Speed
- Short Term Fuel Trim
- Long Term Fuel Trim
- Intake Manifold Pressure
- Timing Advance
- Intake Air Temperature
- Air Flow Rate
- Absolute Throttle Position
- Oxygen sensor voltages/associated short term fuel trims
- Fuel System status
- Fuel Pressure
- Many more
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
1KG PLA 3D Printer Filament (White)
₦ 25,000This 1.75mm Soft-Flexible PLA filament is compatible with most 3D printers and produces items that have good tensile strength and dimensional accuracy.
Specification
- Compatible with most FDM 3D Printers
- Good dimensional accuracy.
- Most popular diameter 1.75mm
- Nozzle temperature: 200-220°C.
- Build plate temperature: 40-60°C.
- Diameter dimensional accuracy +/- 0.02mm.
- Printing speed 60-90mm/s.
- Layer height 0.1-0.3mm.
- Density 1.25±0.05g/cm3.
- Smooth filament feed and extrusion.
- Odour-free, warp-free, and bubble-free.
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
PCB Drill kit
₦ 7,000This very handy tool allows you to drill, and grind different kinds of things. It is extremely handy in making through holes in Printed Circuit Boards.
Product Description:
- 1 x Handle
- 1 x AC power adapter (US plug / AC 100~240V / 80cm-cable)
- 5 x Chucks (0.5 / 1.0 / 1.5 / 2.5 / 3.0mm)
- 20 x Corundum card grindings
- 2 x Wool grinding heads
- 2 x Grinding heads
- 1 x Connectiing rod
- 10 x High-speed steel drill (0.5 / 0.8 / 1.0 / 1.2 / 1.5 / 2.0 / 2.2 / 2.5 / 3.0 / 3.2mm)
- 1 x Abrasive disc cutter
- 1 x Plastic case
- Electric drill type:Mini drill
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View
Reviews
There are no reviews yet.