Only logged in customers who have purchased this product may leave a review.
Power 3.3/5V Supply Module For MB 102 Breadboard
Power 3.3/5V Supply Module For MB 102 Breadboard
₦ 2,000
This MB-102 Breadboard power supply delivers 3.3V and 5V to serve most of you prototyping needs. Simply use the jumper cables to select the appropriate output voltage for your application. It has a power switch and it can be powered from a wall outlet or battery.
Related Products
-
0 out of 5
CP2102 MICRO USB to UART TTL Module
₦ 1,5005A constant current LED driver and charger for lithium-ion battery
· 3.3V and 5V voltage output
· Supports baud rates from 300bps ~ 1Mbps
On-chip voltage regulator output voltage 3.3V
Supports data formats for 8 data bits, 1 stop bit and parity bits
Connotation 512 byte receive buffer and 512 byte transmit buffer
Support for hardware or X-ON / X-OFF handshakeProduct added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
3.3V 700mA Isolated Switching
₦ 3,000This AC-DC 220VAC 5VDC 700ma isolated power supply module has temperature protection, over current protection and short circuit protection, high and low voltage isolation withAC85 ~ 265 v wide voltage input, ac/dc current, 431 precision voltage stability DC5V outputSmall size, stable performance, cost-effectiveTechnical Specifications:Condition: brand newQuantity: 1PCSInput voltage: AC 85 ~ 265 v 50/60 hz or DC 100~ 370 vImput current: 0.0273A(AC110V) 0.014A(AC220V)Input Inrush Current: 20AOutput voltage: DC 5V (+ / – 0.2 V)Output current 700 mAPower 3.5 WOperating temperature -20~60 degreeRelative humidity 40-90%RHOutput 5V, min current 0a, max current 700mA, peak current: 800mA, output range: 4.8~5.2v, ripple wave: 60mVOutput power:0-4W(DC current)Output efficiency: 80%Switch machine overshoot: MAX 10%Output voltage rise time: MAX 100MSOutput over voltage: 4.8-5.2V, recovery: Lock, restart after recoveryOutput over power protection: YES, recovery: Lock, restart after recoveryShort-circuit protection: YES, automatic recovery after problem solvedTemperature protection: YES, recovery: Lock, restart after recoveryOvercurrent protection: YES, recovery: Lock, restart after recoveryProduct added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
XL6009 Adjustable DC-DC Booster Power Supply Module
₦ 2,250Description:-
XL6009 module is a non-isolated step-up boost voltage converter featuring adjustable output voltage, high efficiency. It converts input voltage of 5-32V DC to an output voltage of 4-38V DC.
Features:-
Wide input voltage 3V ~ 32V, optimum operating voltage range is 5 ~ 32V;
Wide Output voltage 5V ~ 35V;
Built-4A efficient MOSFET switches enable efficiency up to 94%; (LM2577 current is 3A)
High switching frequency 400KHz, can use a small-capacity filter capacitors that can achieve very good results, the ripple smaller and smaller. (LM2577 frequency only 50KHz)Test Results:-
Input 3V Output 12V 0.4A 4.8W
Input 5V Output 12V 0.8A 9.6W
Input 7.4V Output 12V 1.5A 18W
Input 12V Output 15V 2A 30W
Input 12V Output 16V 2A 32W
Input 12V Output 18V 1.6A 28.8W
Input 12V Output 19V 1.5A 28.5W
Input 12V Output 24V 1 A 24W
Vin * Iin * Efficiency = Vout * Iout
Vin: Input Voltage
Iin: Input current
Vout: Output Voltage
Iout: Output current
Technical Parameters:-
Module Properties: Non-isolated boost (BOOST)
Rectification: Non-Synchronous Rectification
Input Voltage Range: 3V ~ 32V
Output Voltage Range: 5V ~ 35V (Note: If you want to get the max voltage, you should make the input current as least 3A)
Input Current: 4A (max), no-load 18mA (5V input, 8V output, no-load is less than 18mA. Higher the voltage, the greater the load current.)
Conversion efficiency: <94% (greater the pressure, the lower the efficiency)
Switching frequency: 400KHz
Output Ripple: 50mV (the higher the voltage, the greater the current, the greater the ripple)
Load Regulation: ± 0.5%
Voltage Regulation: ± 0.5%
Operating Temperature: -40 ? ~ +85 ?
Dimensions: 43mm * 21mm * 14mm (L * W * H)
When using these modules remember that the output current will be a lot less than the input current, (remember – W = VA). For example, if you have a 10V output at 1A from a 5V input, the input current will be around 3.6A. The real-life maximum amount of power you can get out of these things is around 10W.Output current is greater than 2.5A (or output power greater than 10W) to work long hours, please add heat sink.
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
HC-05 Master-Slave Bluetooth Module
₦ 9,500This module can be set as a transmitter or receiver, transmitter can pair with receiver , receiver and receiver or transmitter and transmitter can’t communication between eachother, receiver can pair with computers and cell phone’s bluetooth.
1. It is HC-05.
2. Uses the CSR mainstream bluetooth chip, bluetooth V2.0 protocol standards.
3. Module working voltage 3.3 V.
4. Potter default rate of 9600, the user can be set up.
5. The core module size : 28 mm x 15 mm x 2.35 mm.
6. Working current: matching for 30 MA, matching the communication for 8 MA.
7. Dormancy current: no dormancy.
8. Used for GPS navigation system, water and electricity gas meter reading system.
9. With computer and bluetooth bluetooth adapter, PDA, seamless connection equipmentCommercial Series: Bluetooth module board Series
With LED indicator light, use 150mA and 3.3V regulation chip.
With VCC.GND.TXD.RXD foot for the Bluetooth
With “Re-seach” button(ON/OFF/WAKE foot for it , external MCU outinput “High level” can control module to re-seach)
Compatible with bluetooth master module”.slave module”or master-slave(whole) module.
Input voltage: 3.3~6V
Size: 1.55cm*3.98cm
Note:input power supply 3.3~6V, Prohibit more than 7V
No “Automatically prevent power supply peversing func”, so please correctly connect power supply
We advise to install “Bluetooth master module”
The “State” is output foot for LED status, when bluetooth “Unconnected”, output “Pulse” ; when bluetooth “connected”, output “High level”, we can determine the states from “MCU”
If only the board , No any “Bluetooth Function “Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
4-Channel Relay Module
₦ 4,500The 4-channel relay module is able to switch up to 250A 10A and can be easily applied to home automation and control applications.
Uses:
- Supports all MCUs and Arduino Modules
- Easy connection
- Simple 5V Operation
- Very handy for home automation and control applications
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
20 X 4 LCD Module – Arduino Compatible
₦ 8,250This 20 X 4 LCD Module allows you to fit in a lot more text than you can on the smaller 16X4. It is however fully compatible. It has the industry standard HD44780 LCD controller.
-
- 20X4 Characters
- 5V Operating voltage
- Fully pin and code compatible with 16X2, 16X1 LCDs
- Backlight
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
Reviews
There are no reviews yet.