Only logged in customers who have purchased this product may leave a review.
Photosensitive Resistance Sensor Module
Photosensitive Resistance Sensor Module
₦ 1,500
This photosensitive resistive sensor module is handy in home automation and solar applications. The sensitivity can be varied using the potentiometer. Additionally, it is capable of driving up to 15mA.
Features
- Operating voltage of 3.3 V to 5 V
- DO digital switch output (0 and 1) and AO analog voltage output
- Adjustable senstivity
+ power supply positive
– connect power cathode
DO TTL switch signal output
AO analog signal output
Related Products
-
0 out of 5
DHT22 Temperature and Humidity Sensor
₦ 10,500DHT-22 is a humidity and temperature sensor with read out over single wire digital interface. The sensor is already calibrated and doesn’t need extra components so you can measure relative humidity and temperature right away.
- 3 to 5V power and I/O
- 2.5mA max current use during conversion (while requesting data)
- Good for 0-100% humidity readings with 2-5% accuracy
- Good for -40 to 80°C temperature readings ±0.5°C accuracy
- No more than 0.5 Hz sampling rate (once every 2 seconds)
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
MQ-2 Combustible Gas Sensor – Arduino Compatible
₦ 4,000This sensor allows you to detect combustible gases in the air. It is capable of detecting flamable gases in concentrations ranging from 300 to 10,000 ppm using only one analog pin from a microcontroller.
5V Operation
Detects any of the following flammable gases- LPG
- Butane
- Propane
- Methane
- Alcohol
- Hydrogen
- Smoke
Example Application: Fire prevention system, Gas leakage detector, Gas concentration detector.
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
LM35 Temperature Sensor
₦ 1,500The LM35 is a precision integrated-circuit temperature sensor with an output voltage linearly-proportional to the Centigrade temperature. The very popular LM35 temperature sensor is displays 0.1V to 1°C and can be interfaced to any Arduino or microcontroller ADC with no external components
Features
- Calibrated Directly in Celsius (Centigrade)
- Linear + 10-mV/°C Scale Factor
- 0.5°C Ensured Accuracy (at 25°C)
- Rated for Full −55°C to 150°C Range
- Suitable for Remote Applications
- Low-Cost
- Operates from 4 V to 30 V
- Less than 60-µA Current Drain
Can be used to measure temperature in different kinds of electronic projects
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
W1219 Thermostat Temperature Controller Switch Module + Waterproof NTC Sensor Module
₦ 6,500A digital temperature controller module with dual LED display and an inbuilt relay module for control. The cut-off temperature is set with buttons on board
- Control Range:-50~110 Celsius
- Control Precision:0.1 Celsius
- Measuring Input: NTC10K waterproof sensor L=0.5m
- High Temperature Alarm:-49~110 Celsius
- Input Voltage: DC 12V
- Output Type: relay output 10A (max)
- Return Difference Setting:0.1~30 degree Celsius
- Delay Starting:0-10min
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
ADXL335 3-Axis Analog Output Accelerometer Sensor
₦ 7,500The ADXL335 3-Axis Analog Accelerometer is excellent for your drone and motion sensing projects. With a very simple 3-axis analog output, it has a minimal I/O requirement.
- 3-axis sensing
- Small, low-profile package
- Low power – 350 μA (typical)
- Single-supply operation
- 1.8 V to 3.6 V
Can withstand up to 10,000 g shock
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
F249 Infrared Motor Speed Sensor Module
₦ 1,500Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View
Reviews
There are no reviews yet.