Only logged in customers who have purchased this product may leave a review.
NRF 240LO1+ 2.4GHz Wireless Transciever
₦ 950
- Capable of up to 2Mbps communication
- 1.9 to 3.6V Operating Voltage
- Low – Power Features 400nASleep mode current consumption
- Fast start up time: 240us from SLEEP to RX or TX mode
- 1.9 to 3.6V Operating Voltage
2 in stock
Related Products
-
SIM808 GSM GPRS + GPS Module
₦ 20,500SIM808 module is a complete Quad-Band GSM/GPRS module which combines GPS technology for satellite navigation. The compact design which integrated GPRS and GPS in a SMT package will significantly save both time and costs for customers to develop GPS enabled applications. Featuring an industry-standard interface and GPS function, it allows variable assets to be tracked seamlessly at any location and anytime with signal coverage.
Qucik View -
Transciever & Adapter Board NRF2401+
₦ 1,800The ubiquitous NRF24L01+ Module which is capable of short and medium range transmission of up to 2Mbps operates at 3.3V. This can be inconvenient for most engineers. Therefore, we have bunduled the module together with an adapter board to make things much easier
Qucik View -
IR2110 + Free Socket
₦ 1,200The IR2110 is a high voltage, high speed power MOSFET and IGBT driver with independent high and low side referenced output channels. It is compatible with standard CMOS or LSTTL output, down to 3.3V logic.The floating channel can be used to drive an N-channel power MOSFET or IGBT in the high side configuration which operates up to 500 or 600 Volts.
It can be used to in inverter, solar and other power based projects to control MOSFET transistors or IGBT devices.
Features
- Floating channel designed for bootstrap operation Fully operational to +500V or +600V
- Gate drive supply range from 10 to 20V
- Undervoltage lockout for both channels
- 3.3V logic compatible Separate logic supply range from 3.3V to 20V Logic and power ground ±5V offset
- CMOS Schmitt-triggered inputs with pull-down
- Cycle by cycle edge-triggered shutdown logic
- Matched propagation delay for both channels
- Outputs in phase with inputs
Qucik View -
Wi-Fi Module Serial to USB Adapter Board ESP8266
₦ 1,500This USB ESP8266 adapter board which can be plugged directly to your computer allowing communication, testing and programming to be done on the module with ease.
· CH340 serial chip
· 3225 chip crystal, to enhance the stability of the serial port
Fully compatible with Windows, Mac and Linux systems
Qucik View -
RFID Kit – 13MHz RC522
₦ 2,500RC522 is a 13.56 MHz RFID reader writer module which easy to use and low cost. It can be easily hooked up to Arduino or other microcontroller (e.g. PIC, Atmel or ARM) via SPI. This kit comes with two tags so you can begin prototyping right away.
Useful for making access control for locks, vehicle anti-theft, attendance systems, etc.
The RC522 has full support for Arduino: //playground.arduino.cc/Learning/MFRC522
- Operating current :13-26mA/DC 3.3V
- Idle current :10-13mA/DC 3.3V
- SPI communication (Industry standard)
- Sleep current: less than 80uA
- Peak current: less than 30mA
- Operating Frequency: 13.56MHz
Qucik View -
HC-12 Wireless Serial Module Up to 1km
₦ 3,500Imagine a wireless UART port with a range of up to 1km. You are looking at it
Features
- Working voltage: 3.2V~5.5V
- Default address range: 1km
- Baud rate: 5000bps
- Default idle current: 16MA (In different working modes operating current is different)
- Module dimensions: 27.8 x 14.4 x 4mm
- Operating frequency range: 433.4-473.0MHz, up to 100 channels of communication
- The maximum transmit power: 100mW (settable)
- Default factory settings: Mode FU3, baud rate is 9600bps, communication channels CH001 (433.4M)
Qucik View
Reviews
There are no reviews yet.