Only logged in customers who have purchased this product may leave a review.
MP3 Decoder Board With Remote Control
MP3 Decoder Board With Remote Control
₦ 3,500
A highly integrated single-chip multimedia sound systems allows you to play MP3 files from a flash disk or SD card. It is also an FM player and can accept auxilliary input from a 3.5mm jack.
FEATURES
- Single decoding, Support the MP3 format music.
- Digital tube display
- Support the TF card.have the USB interface.
- Support FM radio, cable band (87.5MHZ-108.0MHZ);
- Support 5-10 meter distance infrared remote control operation
- Support for external audio input .LINE IN(AUX)
- key-press: VOL-/ AUTO / VOL+ / MODE;
- MODE key: in turn switches between USB/SD/FM/AUX.
Out of stock
Related Products
-
0 out of 5
3.3V 700mA Isolated Switching
₦ 3,000This AC-DC 220VAC 5VDC 700ma isolated power supply module has temperature protection, over current protection and short circuit protection, high and low voltage isolation withAC85 ~ 265 v wide voltage input, ac/dc current, 431 precision voltage stability DC5V outputSmall size, stable performance, cost-effectiveTechnical Specifications:Condition: brand newQuantity: 1PCSInput voltage: AC 85 ~ 265 v 50/60 hz or DC 100~ 370 vImput current: 0.0273A(AC110V) 0.014A(AC220V)Input Inrush Current: 20AOutput voltage: DC 5V (+ / – 0.2 V)Output current 700 mAPower 3.5 WOperating temperature -20~60 degreeRelative humidity 40-90%RHOutput 5V, min current 0a, max current 700mA, peak current: 800mA, output range: 4.8~5.2v, ripple wave: 60mVOutput power:0-4W(DC current)Output efficiency: 80%Switch machine overshoot: MAX 10%Output voltage rise time: MAX 100MSOutput over voltage: 4.8-5.2V, recovery: Lock, restart after recoveryOutput over power protection: YES, recovery: Lock, restart after recoveryShort-circuit protection: YES, automatic recovery after problem solvedTemperature protection: YES, recovery: Lock, restart after recoveryOvercurrent protection: YES, recovery: Lock, restart after recoveryProduct added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
5V DC 2 Channel Solid State Relay Module
₦ 3,000This is a 5V solid state relay 240V 2A, able to control sizable loads.
Features
-
- High current relay, AC250V 10A, DC30V 10A
- 2 LEDs to indicate when relays are on
- Works with logic level signals from 3.3V or 5V devices
- Opto-isolation circuitry
- PCB size: 50×45 mm
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
-
0 out of 5
Channel Digital Amplifier Board with Subwoofer Output
₦ 6,500This stereo amplifier is allows you to easily deliver a powerful sound up to 200W! And all you need to do is connect a transformer.
FEATURES
- Output power:80W+80W
- Output Impedance:4-8 Ohms
- Frequency range:20Hz-30kHz
- Microphone input
- SNR:100dB
- Number of channels:3 (left channel,right channel,subwoofer)
- Product size: about 13.2*14.2*6.1cm/5.2* 5.6*2.4inch
- Power Supply: AC +/-24V (>120w) ring transformer (Please use a high power transformer or DC power supply for best output.
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
3V to 5V USB Output Step Up Power Module
₦ 2,000This module is excellent for charging mobile phones or powering other kinds of devices from 3V power sources such as Lithium Ion batteries or AA batteries. It delivers a regulated 5V output from a 3V input source.
Features:
- Input voltage: 1-5V
- Output voltage: 5.1-5 .2 V
- Output Current: Rated 1A-1.5A (single lithium input), the maximum 1.5A (single lithium input)
- Efficiency: Up to 96% (the higher the input voltage, the higher the efficiency)
- Switching frequency: 500KHz
- Input Reverse Polarity Protection: None
- Connection: Welding
- Input: IN + Postive, IN-Negative
- Output: USB Output
Can be used to easily make mobile power supply to charge and power MP3, Mobile phones or power bank from as little as a single cell.
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
Printed Circuit Board Etch Resistant Marker Pen
₦ 1,000This two sided etch resist pen for fast fabrication of printed circuit boards. The ink adheres perfectly to copper and is completely resistant to ferric chloride and other usual etchant solutions. Draw the planned circuit onto a thoroughly cleaned copper laminated board and allow to dry. Then immerse the board in etching fluid until the copper is dissolved. The ink can then be removed with Degreasing Solvent or PCB Cleaner, and the circuit board is then ready to be drilled and assembled. This pen is capable of producing thin, delicate lines allowing for quite a condensed track layout if required.
It can also be used to correct broken tracks while making PCB using toner resist method
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
100W Stereo Amplifier Board With Microphone Input
₦ 4,800- Output power:50W+50W
- Output Impedance:4-8 Ohms
- Frequency range:20Hz-30kHz
- Microphone input
- SNR:100dB
- Number of channels: 2 (left channel,right channel)
- Power Supply: AC +/-24V (>120w) ring transformer (Please use a high power transformer or DC power supply for best output.
Package Size:36cm x 33cm x 16cm (14.17in x 12.99in x 6.30in)
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View
Reviews
There are no reviews yet.