Only logged in customers who have purchased this product may leave a review.
Mini USB 5V USB to 3.3V DC Power Outlet

Mini USB 5V USB to 3.3V DC Power Outlet
₦ 1,500
This DC power outlet allows connectivity of power and data to electronic projects. It allows USB data pins (D+ and D-) to be connected to a USB capable microcontroller. It also carries a 3.3V regulator on board and allows 5V devices to be powered as well.
USB Input: 5V
DC power socket input: 5-12V
Output: 5V and 3.3V
Related Products
-
0 out of 5
PWM Motor Speed Controller (DC 6V-28V 3A)
₦ 5,000This DC Motor Speed Controller allows the direction and speed of a DC motor using a Pulse-Width-Modulated (PWM) DC voltage with a Duty Cycle fully adjustable from 0%-100%. It is able to deliver 3A continuously to DC motor or other DC loads.
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
5A DC-DC CC/CV Lithium Charger LED Driver Power Module
₦ 2,500This very utilitarian board delivers constant voltage or constant current output and comes in handy as a battery charger (Lead acid or Lithium battery), LED Constant current driver, as well as other power supply needs. It is also quite chunky -deliverying up to 5A output.
-
- Output voltage: 0.8V-30V
- Input voltage: 5V-32V
- Separately adjustable voltage and current outputs
- Size: 51 * 26.3 * 14 (L * W * H) (mm)
- Operating Temperature: -40 to +85 Degrees
- Voltage Regulation: +/-2.5%
- Load Regulation: +/- 0.5%
- Output ripple: 50mV
- Switching frequency: 300KHz
- Conversion efficiency: 95% (the highest)
- Output current: adjustable maximum 5A
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
-
0 out of 5
LM386 Amplifier + Free Socket
₦ 900LM386 is a power amplifier designed for use in low voltage consumer applications. The gain is internally set to 20 but can be configured to any value from 20 to 200. It is easy to connect for audio amplifiers and many other circuts
Features
- Good for battery powered circuits
- Minimal external parts
- Wide supply voltage range: 4V–12V or 5V–18V
- Low quiescent current drain: 4mA
- Voltage gains from 20 to 200
- Ground referenced input
- Self-centering output quiescent voltage
- Low distortion: 0.2% (AV = 20, VS = 6V, RL = 8W, PO = 125mW, f = 1kHz)
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
SIM800L GSM Module
₦ 8,000This bundle combines the SIM800L GSM module and a power supply because we know that powering a GSM module can be a tricky affair. The included power supply easily delivers the 2A that the GSM modem needs. This allows the modem to be powered from a battery (4-30V), a power bank or USB port.
SIM800 Features
- Quad-band modem
- Able to place and recieve calls
- Able to send and receive SMS messages
- Send and receive GPRS data (TCP/IP, HTTP, etc.)
- Receive FM radio broadcasts
- Lead out buzzer and vibrational motor control port
- Auto baud rate
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
3V to 5V USB Output Step Up Power Module
₦ 1,000This module is excellent for charging mobile phones or powering other kinds of devices from 3V power sources such as Lithium Ion batteries or AA batteries. It delivers a regulated 5V output from a 3V input source.
Features:
- Input voltage: 1-5V
- Output voltage: 5.1-5 .2 V
- Output Current: Rated 1A-1.5A (single lithium input), the maximum 1.5A (single lithium input)
- Efficiency: Up to 96% (the higher the input voltage, the higher the efficiency)
- Switching frequency: 500KHz
- Input Reverse Polarity Protection: None
- Connection: Welding
- Input: IN + Postive, IN-Negative
- Output: USB Output
Can be used to easily make mobile power supply to charge and power MP3, Mobile phones or power bank from as little as a single cell.
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
iMAX B6 Lipro Multipurpose Battery Charger
₦ 30,000This multipurpose microprocessor controlled battery charger is able to safely charge LIon, LiPo, LiFe, NiCd, NiMH and Pb cells. So if you are looking to charge the battery on your drone, quadcopter, car or other project, this is the charger for you!
Features
- Cell balancing Li-ion, LiPo and LiFe capable Ni-Cd and NiMH capable
- Large range of charge currents Store function, allows safe storage current
- Time limit function
- Input voltage monitoring. (Protects car batteries at the field)
- Data storage (Store up to 5 packs in memory)
- Battery break in and cycling.
- Support new generation system (LiFe) battery
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View
Reviews
There are no reviews yet.