MCP2515 CAN Bus module TJA1050 Reciever SPI
MCP2515 CAN Bus module TJA1050 Reciever SPI
MCP CAN BUS
MCP2515 CAN Bus module TJA1050 Reciever SPI
MCP2515 CAN Bus module TJA1050 Reciever SPI
MCP CAN BUS

MCP2515 CAN Bus Module

₦ 6,000

The MCP2515 Controller Area Network bus module allows connections to CAN networks and has an easy to use SPI interface. Many machinery use CAN to communicate such as cars, via OBD. Fully Arduino compatible library

Category:
Brand:
Tags: ,

Out of stock

Add to Wishlist

The MCP2515 Controller Area Network bus module allows connections to CAN networks and has an easy to use SPI interface. Many machinery use CAN to communicate such as cars, via OBD. Fully Arduino compatible library

 

Features

  • Standard SPI interface
  • Supports CAN V2.0B specification, communication speed 1Mb / S
  • Data Field: 0 to 8 Byte
  • Three frames – standard, expand the frame and remote
  • Power Supply: DC5V module & SPI interface protocol control
  • 120 ohm termination resistors, Impedance matching, ensure drive capacity, long-distance data transmission against signal radiation
  • Easy to use Arduino Library

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related Products

  • 3.3V 700mA Isolated Switching
    0 out of 5

    3.3V 700mA Isolated Switching

    ₦ 3,000
    This AC-DC 220VAC 5VDC 700ma isolated power supply module has temperature protection, over current protection and short circuit protection, high and low voltage isolation with
    AC85 ~ 265 v wide voltage input, ac/dc current, 431 precision voltage stability DC5V output
    Small size, stable performance, cost-effective
    Technical Specifications:
    Condition: brand new
    Quantity: 1PCS
    Input voltage: AC 85 ~ 265 v 50/60 hz or DC 100~ 370 v
    Imput current: 0.0273A(AC110V) 0.014A(AC220V)
    Input Inrush Current: 20A
    Output voltage: DC 5V (+ / – 0.2 V)
    Output current 700 mA
    Power 3.5 W
    Operating temperature -20~60 degree
    Relative humidity 40-90%RH
    Output 5V, min current 0a, max current 700mA, peak current: 800mA, output range: 4.8~5.2v, ripple wave: 60mV
    Output power:0-4W(DC current)
    Output efficiency: 80%
    Switch machine overshoot: MAX 10%
    Output voltage rise time: MAX 100MS
    Output over voltage: 4.8-5.2V, recovery: Lock, restart after recovery
    Output over power protection: YES, recovery: Lock, restart after recovery
    Short-circuit protection: YES, automatic recovery after problem solved
    Temperature protection: YES, recovery: Lock, restart after recovery
    Overcurrent protection: YES, recovery: Lock, restart after recovery
    Buy Now
    Add to Wishlist
    Qucik View
  • 0 out of 5

    LM393 + Free Socket

    ₦ 900

    The LM393 device consist of two independent low voltage comparators designed specifically to operate from a single supply over a wide range of voltages. This device can be used for various comparison based control and sensing projects.

    Features

    • Wide single-supply voltage range or dual supplies: 2 V to 36 V or ±1 V to ±18 V
    • Very low supply current (0.45 mA) independent of supply voltage (1 mW/comparator at 5 V)
    • Low input bias current: 20 nA typ.
    • Low input offset current: ±3 nA typ.
    • Low input offset voltage: ±1 mV typ.
    • Input common-mode voltage range includes ground
    • Low output saturation voltage: 80 mV typ. (Isink  = 4 mA)
    • Differential input voltage range equal to the supply voltage
    • TTL, DTL, ECL, MOS, CMOS compatible outputs

     

     

    Buy Now
    Add to Wishlist
    Qucik View
  • 0 out of 5

    Arduino Single Channel Relay Module 5V/10A

    ₦ 1,500

    This product is a 1-channel relay module board with LED indicators, It can be controlled by microcontrollers such as Arduino, AVR, PIC, ARM any other microcontroller operating at 5V.

    With this relay you can easily control electrical appliances, lights, etc.

    Features

      • Diode protected input
      • This relay module is 5V active low.
      • It is an 1-channel relay interface board, which can be controlled directly by a wide range of microcontrollers.
      • It is also able to control various appliances and other equipment with large current.
      • Relay output maximum contact is AC250V 10A and DC30V 10A.
      • Can be connected directly to microcontoller GPIO pins.
    • Working status indicator lights are conducive to the safe use.
    Buy Now
    Add to Wishlist
    Qucik View
  • 0 out of 5

    HC-12 Wireless Serial Module Up to 1km

    ₦ 10,000

    Imagine a wireless UART port with a range of up to 1km. You are looking at it

    Features

    • Working voltage: 3.2V~5.5V
    • Default address range: 1km
    • Baud rate: 5000bps
    • Default idle current: 16MA (In different working modes operating current is different)
    • Module dimensions: 27.8 x 14.4 x 4mm
    • Operating frequency range: 433.4-473.0MHz, up to 100 channels of communication
    • The maximum transmit power: 100mW (settable)
    • Default factory settings: Mode FU3, baud rate is 9600bps, communication channels CH001 (433.4M)
    Buy Now
    Add to Wishlist
    Qucik View
  • 0 out of 5

    Arduino Buzzer Module

    ₦ 1,500

    This module allows you to produce a rich and loud sound from your microcontroller.

    • 3.3 V to 5 V Operating Voltage
    • 3V to 5V Control
    • Works without the need of a separate transistor
    • Mounting Hole

    Pin Out

      • VCC (3.3 V to 5 V)
      • GND
    • I/O Control
    Buy Now
    Add to Wishlist
    Qucik View
  • 0 out of 5

    HC-06 Bluetooth Module

    ₦ 9,500

    HC-06 Bluetooth module interfaces easily to microcontroller or Arduino with four I/O pins:

    VCC, GND, TXD, RXD. The module has a status LED.

    Control interface is via AT commands

    Buy Now
    Add to Wishlist
    Qucik View