Only logged in customers who have purchased this product may leave a review.
High-Speed USB SPI Programmer – EZP2010
High-Speed USB SPI Programmer – EZP2010
₦ 12,000
This programmer can read and write the BIOS chips of a DVD,TV,etc
- USB 2.0 interface, the speed is 12Mbps.
- Auto detect chip modules.
- Auto select power voltage.
- Auto off-line chip copy.
- Software and firmware update.
- Support chip of 25 FLASH, 24 EEPROM, 25 EEPROM, 93 EEPROM, etc
Out of stock
Related Products
-
0 out of 5
Micro USB to DIP Adapter- Pair
₦ 1,500These Micro USB to DIP converter boards allow easy connection of a microcontroller or arduino to a PC using standard USB interface.
It may also be used to power a device over the USB port
- 3cm x 3cm x 3cm
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
Dual USB Voltage And Current Tester
₦ 8,250This simple device can be used to operate or test servo motors. There are 3 modes to check servos;
- Manual mode: turn the knob
- Neutral mode: make the servo go back to the neutral point
- Automatic: window wiper mode: make the servo swing like a window wiper in the biggest angle. Push button to change between modes. Lights indicate mode.
You can connect 1-3 servos simultaneously. It can also be used to check the operation of any servo motor whether fitted or not.
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
Arduino IoT Weather Station Kit
₦ 35,000The weather station Internet of Things(IoT) kit allows an internet connected weather station to be built with ease. The kit contains items that allow allow temperature and humidity reading to be collected and posted to the internet via a GSM network with the availability of battery backup.
Kit Contains
- Arduino Uno R3
- DH11 Temperature and Humidity Sensor
- SIM800 GSM Module
- TP4056 Lithium Ion Battery Charger
- 18650 Lithium Ion Battery
- MT3608 Booster
Get more value, pay less.
Product InformationBrandProduct added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
CH340 USB To ESP8266 ESP-01 ESP-01S Wi-Fi Adapter Board
₦ 6,250Description:
- USB to ESP-01 adapter module has CH340G USB to TTL driver IC onboard, so you can easily use your computer to do ESP-01 functional debugging.
- Its a great programmer for the ESP-01. Its very easy to just plug it in and send AT commands, or flip the switch to program and upload a sketch from Arduino IDE. Also you don’t need a separate 3.3V power supply to power the ESP-01.
Features:
- Working voltage: 4.5V – 5.5V (On-board 3.3v LDO Regulator)
- Working current: 300mA(LDO regulator can supply)
- Selectable working mode: On-board toggle switch. UART side for serial TTL debugging by AT commands, PROG for firmware programming
- USB to serial TTL chip: CH340G
- Logic level: 3.3V
- Applications: Home automation, Sensor networks, Industrial wireless control, etc,.
Package Included:
1 X CH340 USB to ESP8266 ESP-01 ESP-01S Wi-Fi Adapter Board
Other Comments:
- 1. The ESP-01 boards are super-simplified ESP8266 and these allow for flashing during development.
- 2. This little gadget makes programming the ESP 01s a breeze. It’s a must have for installing firmware.
- 3. Not at all my first programmer for these boards, but the easiest by a landslide! No buttons to hold down or wiring to do.
- 4. This worked, didn’t try the debug ger but the upload was flawless, very easy and it didn’t seem like it would break even when I stored it in tight confines. Please make sure to set your baud to at least 115200 yes the USB will work either way, but the extra speed will help you.
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
TTL To RS485 Serial Converter Module
₦ 2,000Description:
This is a module that allows the TTL interface of the microcontroller to be transferred to the RS485 module. It is generally used for industrial automation. This module adds lightning protection design and anti-jamming design. When you use it in the field and carry out long distance transmission, you can Connect the GND end of the module to the ground so that lightning protection and anti-interference can be achieved.
It uses a standard 2.54 mm pitch design. If you want to make the second development will be more convenient. It has 120 ohm matching resistance, shorted R0 can, it is recommended that users in the long distance transmission shorted.
It supports communication between multiple microcontrollers, allowing up to 128 devices on the bus. It can be hot-swappable, in order to prevent signal interference, it carried out a large area of copper, the effect is very good.Features:
- 3.3V perfectly compatible with 5.0V power supply
- 3.3V and 5.0V signal perfectly compatible
- Working temperature range: -40 C to + 85 C
- Transmission distance up to kilometers (with 850 meters of 2 * 1.5 cable to do the test, it is recommended to use in the 800 meters, more than 800 meters, please add repeaters)
- Semi-hole process design, the thickness of 0.8mm, makes it easy to use as a combo board, it can also be welded terminal use
- Has RXD, TXD signal lights to observe send and receive status
Specifications:
- Operating voltage: compatible with 3.3V and 5.0V
- Support baud rate: 110-256000bps
- Operating temperature: -40 Celsius to +85 Celsius
- Communication signal: compatible with 3.3V and 5.0V
Package Includes:
- 1 x TTL to RS485 Serial Converter Module
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
Converter Module – USB To RS458
₦ 6,750This RS485 to TTL Module allows you to communicate to an RS-485 device, module or another microcontroller at over 1Mbps from over 1km away! This RS485 transciever can be easily interfaced to a microcontroller or Arduino
- Uses MAX485 integrated circuit
- Pinout DI,DE,RE,RD signals
- 5 Volt Operation
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View
Reviews
There are no reviews yet.