Only logged in customers who have purchased this product may leave a review.
Female-Female Dupont Jumper Cables
₦ 2,000
These male to male dupont jumper cables will help you easily connect things up, especially modules and sensors
- 40 Colored dupont cables
- Length: 20cm
- 1p-1p pin header, Female to Female.
- 2.54mm/1 inch spacing spacing pin headers
- Easily connect modules and sensors
Related Products
-
USB to UART Cable – PL2303
₦ 1,500The Prolific PL2303 USB-TTL serial converter cable allows you to interface to TTL level devices directly from your PC.
PINOUT
- Red: +5 V
- Black: GND
- Green: Tx
- White: Rx
Qucik View -
Male-Male Dupont Jumper Cables
₦ 2,000These male to male dupont jumper cables will help you easily connect things up.
- 40 Colored dupont cables
- Length: 20cm
- 1p-1p pin header, Male to Male.
- 2.54mm/1 inch spacing spacing pin headers
- Can be used as breadboard jumper cables
Qucik View -
R2323 to TTL Converter with Dupont Cable
₦ 1,600This module suitable for any 3.3v or 5v microcontroller and Arduino
• Fully compatible with existing legacy COM port software
• Output signals: VDD, TXD, RXD, CTS, RTS, GND
• Power, TX, RX LED
• Power input: 3.3V or 5VPackage List:
1 * RS232 Serial To TTL Converter Module
4 * Dupont Jumping CableQucik View -
Bi-Directional 4 Channel Logic Level Converter
₦ 1,500This tiny logic level shifter features four bidirectional channels, allowing for safe and easy communication between devices operating at different logic levels. It can convert signals as low as 1.5 V to as high as 18 V and vice versa, and its four channels are enough to support most common bidirectional and unidirectional digital interfaces, including I²C, SPI, and asynchronous TTL serial.
Qucik View -
3.3V-5V TXS0108E 8 Channel Bidirectional Logic Level Converter
₦ 950This chip allow easy conversion between logic levels allowing easy interfacing of Modules or other integrated circuits to a microcontroller or Arduino system.
- 1.2 V to 3.6 V on A Port and 1.65 to 5.5 V on B Port
- Output Enable Function Using OE pin
- VCCA connects to lower logic level eg 3.3V
- VCCB connects to higher logic level eg 5V
- When Ax has TTL 3.3V input, Bx will get TTL 5V output
- When Bx has TTL 5V input, Ax will get TTL 3.3V output
- NO direction control required
Example applications are Arduino to GSM connections, 3.3V SPI/I2C module connection to 5V system, UART interfacing between systems operating at different voltages
Qucik View -
FT232 FTDI To TTL Serial Adapter
₦ 3,000A low-cost way to add USB capability to for Arduino or other microcontrollers. Use this for boot loading or uploading Arduino sketches with ease
- Can program Arduino mini, Pro Mini, Lily Pad and other Arduino devices without pinout.
- Working voltage: 3.3V/5V
- Chip: FT232RL
- Over current protection with 500 mA fuse
Qucik View
Reviews
There are no reviews yet.