esp32
esp32-development-board
esp32
esp32-development-board

ESP32 Development Board (WiFi + Bluetooth)

₦ 13,500

The ESP-32 is the newest and fastest ESP board by Espressif out there. It incorporates WiFi and Bluetooth in one easy to program package. It is easily programmable in the Arduino IDE.
Category:
Brand:
Tags: , , ,
Add to Wishlist
The ESP-32 is the newest and fastest ESP board by Espressif out there. It incorporates WiFi and Bluetooth in one easy to program package. It is easily programmable in the Arduino IDE.
Features
  • Dual-core Tensilica LX6 microprocessor
  • Up to 240MHz clock frequency
  • 520kB internal SRAM
  • Integrated 802.11 BGN WiFi transceiver
  • Integrated dual-mode Bluetooth (classic and BLE)
  • 2.2 to 3.6V operating range
  • 2.5 µA deep sleep current
  • 28 GPIO
  • 10-electrode capacitive touch support
  • Hardware accelerated encryption (AES, SHA2, ECC, RSA-4096)
  • 4MB Flash memory

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related Products

  • bluetooth
    0 out of 5

    ELM327 Mini – Bluetooth OBD-II Diagnostics Protocol Scanner – CD Included

    ₦ 7,000

    The ELM327 Bluetooth Scanner allows  you to scan and disagnose OBD-II protocols and display over 3000 generic code definitions in the database. Clear trouble codes and turn off the MIL (“Check Engine” Light)

    Features

     

    • Works with all OBD-II compliant vehicles (essentially all modern vehicles)
    • Wireless (Bluetooth)
    • Software included for Palm, PDA
    • Software included for Windows PC
    • Software included for Windows Smartphone
    • Supports CAN bus
    • Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).
    • Clear trouble codes and turn off the MIL (“Check Engine” light)
    • Display current sensor data, including:
    • Engine RPM
    • Calculated Load Value
    • Coolant Temperature
    • Fuel System Status
    • Vehicle Speed
    • Short Term Fuel Trim
    • Long Term Fuel Trim
    • Intake Manifold Pressure
    • Timing Advance
    • Intake Air Temperature
    • Air Flow Rate
    • Absolute Throttle Position
    • Oxygen sensor voltages/associated short term fuel trims
    • Fuel System status
    • Fuel Pressure
    • Many more

     

     

    Buy Now
    Add to Wishlist
    Qucik View
  • 0 out of 5

    HC-05 Master-Slave Bluetooth Module

    ₦ 9,500

    This module can be set as a transmitter or receiver, transmitter can pair with receiver , receiver and receiver or transmitter and transmitter can’t communication between eachother, receiver can pair with computers and cell phone’s bluetooth.

    1. It is HC-05.
    2. Uses the CSR mainstream bluetooth chip, bluetooth V2.0 protocol standards.
    3. Module working voltage 3.3 V.
    4. Potter default rate of 9600, the user can be set up.
    5. The core module size : 28 mm x 15 mm x 2.35 mm.
    6. Working current: matching for 30 MA, matching the communication for 8 MA.
    7. Dormancy current: no dormancy.
    8. Used for GPS navigation system, water and electricity gas meter reading system.
    9. With computer and bluetooth bluetooth adapter, PDA, seamless connection equipment

    Commercial Series: Bluetooth module board Series
    With LED indicator light, use 150mA and 3.3V regulation chip.
    With VCC.GND.TXD.RXD foot for the Bluetooth
    With “Re-seach” button(ON/OFF/WAKE foot for it , external MCU outinput “High level” can control module to re-seach)
    Compatible with bluetooth master module”.slave module”or master-slave(whole) module.
    Input voltage: 3.3~6V
    Size: 1.55cm*3.98cm
    Note:

    input power supply 3.3~6V, Prohibit more than 7V
    No “Automatically prevent power supply peversing func”, so please correctly connect power supply
    We advise to install “Bluetooth master module”
    The “State” is output foot for LED status, when bluetooth “Unconnected”, output “Pulse” ; when bluetooth “connected”, output “High level”, we can determine the states from “MCU”
    If only the board , No any “Bluetooth Function “

    Buy Now
    Add to Wishlist
    Qucik View
  • 0 out of 5

    NodeMCU Lua Wi-Fi ESP8266 CP2102 Drive Expansion Board

    ₦ 13,000

    Product Description:
    NodeMCU Lua WIFI ESP8266 CP2102 Drive Expansion Board

    Features:
    ESP12 DEV KIT development board expansion module;
    Lead ESP12 DEV KIT All-function pins: SPI, UART, GPIO, AI and 3.3V power connector;
    Expand two-way motor-driven, two-way direct drive motor;
    Onboard power switch;
    Motor power range: 4.5V ~ 36V;
    Control power range: 4.5V ~ 9V;
    Motor power, control power separation; In the experiment, by short-circuiting block the merger, the VIN and VM short, while power supply to the motor and the control board.

    Precautions:

    When insert ESP-12E module, please note the direction consistent with an expansion board antenna;
    Use of short modules that can simultaneously control board and motor.

    Packing List:

    1x ESP-12E expansion board
    1x NodeMCU

    Buy Now
    Add to Wishlist
    Qucik View
  • 0 out of 5

    AT-09-BLE-Bluetooth-4-0-Module—HM-10-Compatible-6620015

    ₦ 10,000

    This Bluetooth 4.0 TTL transceiver module allows you to communicate with any gadget using the highly energy efficient Bluetooth 4.0 specification

    Features

    • Power input: 3.6V-6V DC(Can not higher than 6V)
    • It’s easy to use and safely enclosed in a plastic sheath
    • Bluetooth version: V4.0
    • Default baud rate: 9600 (Adjustable baudrate)
    • Default serial port setting: 9600, N, 8, 1
    • Operates as slave or master.
    • Ultra-low standby power consumption 90uA~400uA
    • Coverage up to 60 meters
    • Built in PCB antenna
    • Size: 43mm x 15mm
    Pinout
    • VCC: input power supply 3.3~6V, Prohibit more than 7V
    • GND: Ground
    • TX: transport
    • RX: receive
    • State: when bluetooth is connected , output “High level”, “no conntected” output “low level”
    • en:when module is connected, give a high level to “EN”,the module will disconnected.
    Buy Now
    Add to Wishlist
    Qucik View
  • 0 out of 5

    ESP8266 WEMOS ESP32 V3 Development Board With 18650 Battery Holder

    ₦ 12,500
    The ESP-32 is the newest and fastest ESP board by Espressif out there. It incorporates WiFi and Bluetooth in one easy to program package. It is easily programmable in the Arduino IDE.
    Buy Now
    Add to Wishlist
    Qucik View
  • 0 out of 5

    Bluetooth Serial Transceiver Module

    ₦ 1,500

    Description:

    Arduino Bluetooth Serial Transceiver Module Base Board For HC-06 HC-07 HC-05 or Arduino MEGA 2560 UNO R3

    Feature:

    • Commercial Series: Bluetooth module board Series
    • With LED indicator light, use 150mA and 3.3V regulation chip.
    • With VCC.GND.TXD.RXD foot for the Bluetooth.
    • With “Re-seach” button(ON/OFF/WAKE foot for it , external MCU outinput “High level” can control module to re-seach).
    • Compatible with bluetooth master module”.slave module”or master-slave(whole) module.
    • Input voltage: 3.3~6V.
    • Size: 1.55cm*3.98cm.

    Note:

    • Input power supply 3.3~6V, Prohibit more than 7V
    • No “Automatically prevent power supply peversing func”, so please correctly connect power supply
    • We advise to install “Bluetooth master module”
    • The “State” is output foot for LED status, when bluetooth “Unconnected”, output “Pulse” ; when bluetooth “connected”, output “High level”, we can determine the states from “MCU”
    • If only the board , No any “Bluetooth Function”

    Package Includes:
    1 x Bluetooth Serial Transceiver Module

    Buy Now
    Add to Wishlist
    Qucik View