Only logged in customers who have purchased this product may leave a review.
DC Barrel Plug to Terminal Block Adapter – 2 Pcs
₦ 900
This adapter allows wires to be easily connected to 5.5 × 2.1 mm DC barrel plugs. The terminal labelled positive is the center while the negative labelled terminal is the outer sleeve. Two pieces are shipped.
Out of stock
Related Products
-
Resistor Value Pack – 22 Values
₦ 2,000This 22 Value resistor pack contains most of the resistors you will need 10 pieces each of resistors ranging from 10Ω to 10MΩ
- 10Ω
- 22Ω
- 47Ω
- 100Ω
- 220Ω
- 330Ω
- 470Ω
- 680Ω
- 1kΩ
- 2.2kΩ
- 4.7kΩ
- 6.8kΩ
- 10kΩ
- 22kΩ
- 47kΩ
- 68kΩ
- 100kΩ
- 220kΩ
- 470kΩ
- 680kΩ
- 1MΩ
- 10MΩ
Qucik View -
5V DC 2 Channel Solid State Relay Module
₦ 2,000This is a 5V solid state relay 240V 2A, able to control sizable loads.
Features
-
- High current relay, AC250V 10A, DC30V 10A
- 2 LEDs to indicate when relays are on
- Works with logic level signals from 3.3V or 5V devices
- Opto-isolation circuitry
- PCB size: 50×45 mm
Qucik View -
-
Wi-Fi Module Serial to USB Adapter Board ESP8266
₦ 1,500This USB ESP8266 adapter board which can be plugged directly to your computer allowing communication, testing and programming to be done on the module with ease.
· CH340 serial chip
· 3225 chip crystal, to enhance the stability of the serial port
Fully compatible with Windows, Mac and Linux systems
Qucik View -
4X4 Membrane Matrix Keypad
₦ 1,100This 4X4 16-button keypad can be easily interfaced to any microcontroller, even an Arduino. It can be used in security applications, data entry to embedded projects, access control
Qucik View -
Mini Submersible Water Pump
₦ 2,000This simple DC submersible pump allows you to pump water at a rate of up to 120L/H and operates at 3-5V
Features
- DC Voltage: 3-6V
- Maximum lift:40-110cm / 15.75″-43.4″
- Flow rate:80-120L/H
- Outside diameter of water outlet: 7.5mm / 0.3″
- Inside diameter of water outlet: 4.7mm / 0.18″
- Diameter:Approx. 24mm / 0.95″
- Length:Approx. 45mm / 1.8″
- Height:Approx. 33mm / 1.30″
- Plastic
- Driving mode: Brushless DC Motor
- Continuous working life of 500 hours
Qucik View -
5V 30A Single Channel Relay
₦ 2,200This product is a 1-channel relay module board with LED indicators, It can be controlled by microcontrollers such as Arduino, AVR, PIC, ARM any other microcontroller operating at 5V.
With this relay you can easily control electrical appliances, lights, etc.
Features:
- 5V Operation
- The static current:5mA
- Working current:190mA
- Trigger current:2-4mA
Module interface specifications:
-
- DC+ : DC power supply positive pole
- DC- :DC power supply negative pole
- IN : signal triggering pin
- JD+ : relay control voltage positive
- JD- : relay control voltage negative
- It is an 1-channel relay interface board, which can be controlled directly by a wide range of microcontrollers.
- It is also able to control various appliances and other equipment with large current.
- Relay output maximum contact is AC250V 10A and DC30V 10A.
- Can be connected directly to microcontoller GPIO pins.
- Working status indicator lights are conducive to the safe use.
Qucik View
Reviews
There are no reviews yet.