Only logged in customers who have purchased this product may leave a review.
Class D High Power Digital Amplifier Board – TDA7492 -2 x 50W
Class D High Power Digital Amplifier Board – TDA7492 -2 x 50W
₦ 15,000
A powerful amplifier with 50W output on 2 channels, this board allows a very powerful output to be delivered from a single rail power supply.
- Power supply: Single Supply 10-26V DC voltage
- The Maximum power: 50W per channel (8 Ohm)
- Mono power 100W (4 Ohms)
- Size: 57 mm * 70mm * 21 mm
Related Products
-
0 out of 5
Resistor Value Pack (140 Different Values)
₦ 10,000This resistor-value pack is a must have for every electronic lover and hobbyist. It contains most of the resistor values that are typically used. With values ranging from 1 Ohm to 4.7MOhm, you will not have to run out and get the resistor you need while tweaking your prototype.
Features:
- Very convenient and practical.
- High precision and stability.
- Very popular among the electronic lovers.
- Wide variety of metal film resistors.
Package Includes:
10 units each of 1.0Ω, 1.2Ω, 1.5Ω, 1.8Ω, 2.0Ω, 2.2Ω, 2.4Ω, 2.7Ω, 3.0Ω, 3.3Ω, 3.6Ω, 3.9Ω, 4.3Ω, 4.7Ω, 5.1Ω, 5.6Ω, 6.2Ω, 6.8Ω, 7.5Ω, 8.2Ω, 9.1Ω, 10Ω, 12Ω, 15Ω, 18Ω, 20Ω, 22Ω, 24Ω, 27Ω, 30Ω, 33Ω, 36Ω, 39Ω, 43Ω, 47Ω, 51Ω, 56Ω, 62v, 68Ω, 75Ω, 82Ω, 91Ω, 100Ω, 120Ω, 150Ω, 180Ω, 200Ω, 220Ω, 240Ω, 270Ω, 300Ω, 330Ω, 360Ω, 390Ω, 430Ω, 470Ω, 510Ω, 560Ω, 620Ω, 680Ω, 750Ω, 820Ω, 910Ω, 1KΩ, 1.2KΩ, 1.5KΩ, 1.8KΩ, 2.0KΩ, 2.2KΩ, 2.4KΩ, 2.7KΩ, 3.0KΩ, 3.3KΩ, 3.6KΩ, 3.9KΩ, 4.3KΩ, 4.7KΩ, 5.1KΩ, 5.6KΩ, 6.2KΩ, 6.8KΩ, 7.5KΩ, 8.2KΩ, 9.1KΩ, 10KΩ, 12KΩ, 15KΩ, 18KΩ, 20KΩ, 22KΩ, 24KΩ, 27KΩ, 30KΩ, 33KΩ, 36KΩ, 39KΩ, 43KΩ, 47KΩ, 51KΩ, 56KΩ, 62KΩ, 68KΩ, 75KΩ, 82KΩ, 91KΩ, 100KΩ, 120KΩ, 150KΩ, 180KΩ, 200KΩ, 220KΩ, 240KΩ, 270KΩ, 300KΩ, 330KΩ, 360KΩ, 390KΩ, 430KΩ, 470KΩ, 510KΩ, 560KΩ, 620KΩ, 680KΩ, 750KΩ, 820KΩ, 910KΩ, 1MΩ, 1.2MΩ, 1.5MΩ, 1.8MΩ, 2.0MΩ, 2.2MΩ, 2.4MΩ, 2.7MΩ, 3.0MΩ, 3.3MΩ, 3.6MΩ, 3.9MΩ, 4.3MΩ, 4.7MΩ
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
IR2110 + Free Socket
₦ 1,200The IR2110 is a high voltage, high speed power MOSFET and IGBT driver with independent high and low side referenced output channels. It is compatible with standard CMOS or LSTTL output, down to 3.3V logic.The floating channel can be used to drive an N-channel power MOSFET or IGBT in the high side configuration which operates up to 500 or 600 Volts.
It can be used to in inverter, solar and other power based projects to control MOSFET transistors or IGBT devices.
Features
- Floating channel designed for bootstrap operation Fully operational to +500V or +600V
- Gate drive supply range from 10 to 20V
- Undervoltage lockout for both channels
- 3.3V logic compatible Separate logic supply range from 3.3V to 20V Logic and power ground ±5V offset
- CMOS Schmitt-triggered inputs with pull-down
- Cycle by cycle edge-triggered shutdown logic
- Matched propagation delay for both channels
- Outputs in phase with inputs
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
40 Wire Ribbon Cable -40Pins
₦ 3,000These ribbon cables are most useful in connecting LCDs, Modules or other boards. Each cable has crimped 40 cables connected to a housing.
Ribbon cables greatly simplify the task of connecting things up by eliminating the need for soldering.
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
L298 H-Bridge Motor Driver – Arduino Compatible
₦ 4,000Basic attributes
Module name :Dual H-bridge motor driver module
Operating mode :H-bridge driver (dual)
Master chip :L298NLogic voltage :5V
Drive voltage :5V-35V
Logic Current :0mA-36mA
Drive current :2A (MAX single bridge)
Storage Temperature :-20 to 135Maximum Power :25W
Weight :30gExternal dimensions :43 * 43 * 27mmProduct added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
SMD to DIP Adapter (QFP, TQFP, FQFP, LQFP)
₦ 1,000This SMD Adapter let’s you solder 0.5mm and 0.8mm SMD Integrated Circuits (IC) such as Atmel, MSP, STC and Microchip microcontrollers
- 0.5mm and 0.8mm on opposite sides
- 32-100 pin SMD components
- 0.8mm side allows mounting of 32 to 64 pin components
- 0.5mm side allows mounting of 32 to 100 pin components
- Applicable to common package: QFP, TQFP, FQFP, LQFP, etc.
- Size: 38 * 46mm
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View -
0 out of 5
Dupont Cable
₦ 1,000These cables are excellent for all your prototyping needs. Easily connect Raspberry Pi, Arduino boards, ARM based boards and start hacking away.
30 cables in total
- 10 Male-to-Male
- 10 Male-to-Female
- 10 Female-to-Female
Product added! Browse WishlistThe product is already in the wishlist! Browse WishlistQucik View
Reviews
There are no reviews yet.