Only logged in customers who have purchased this product may leave a review.
Arduino LilyPad – Atmega 328 Model
₦ 6,000
The LilyPad Arduino 328 Board is an Arduino based board designed for making wearable and e-textile type projects. It is fully Arduino compatible and has holes for easily sewing it into projects. LEDs, Sensors, buttons and so much more can be easily integrated.
Features:
- ATmega328 Microcontroller
- Operating Voltage 2.7-5.5 V
- Input Voltage 2.7-5.5 V
- Digital I/O Pins 14
- PWM Channels 6
- Analog Input Channels 6
- DC Current per I/O Pin 40 mA
- Flash Memory 16 KB (of which 2 KB used by bootloader)
- SRAM 1 KB
- EEPROM 512 bytes
- Clock Speed 8 MHz
2 in stock
Related Products
-
Raspberry Pi 4 (4GB RAM)
₦ 175,000Dual-display, desktop computer and robot brains, smart home hub, media center, networked AI core, factory controller, and much more
Qucik View -
Arduino Single Channel Relay Module 5V/10A
₦ 1,500This product is a 1-channel relay module board with LED indicators, It can be controlled by microcontrollers such as Arduino, AVR, PIC, ARM any other microcontroller operating at 5V.
With this relay you can easily control electrical appliances, lights, etc.
Features
-
- Diode protected input
- This relay module is 5V active low.
- It is an 1-channel relay interface board, which can be controlled directly by a wide range of microcontrollers.
- It is also able to control various appliances and other equipment with large current.
- Relay output maximum contact is AC250V 10A and DC30V 10A.
- Can be connected directly to microcontoller GPIO pins.
- Working status indicator lights are conducive to the safe use.
Qucik View -
-
Arduino Camera
₦ 4,500This OV7670 Camera allows image capabilities to be added to a microcontroller or Arduino with ease. It is capable of up to 640 X 480 pixel resolution and has a widely available library.
- Photosensitive array: 640X480
- IO Voltage: 2.5V to 3.0V (internal LDO for nuclear power 1.8V)
- Power operation: 60mW/15fpsVGAYUV
- Sleep: <20μA
- Temperature Operating: -30 ? to 70 ?
- Output Formats (8): YUV/YCbCr4: 2:2 RGB565/555/444 GRB4: 2:2 Raw RGB Data
- Optical size: 1/6 “
- FOV: 25 °
- Maximum Zhen rate: 30fps VGA
- Sensitivity: 1.3V / (Lux-sec)
- SNR: 46 dB
- Dynamic range: 52 dB
- View Mode: Progressive
- Electronic Exposure: 1 line to 510 line
- Pixel Size: 3.6μm x 3.6μm
- Dark current: 12 mV / s at 60 ?
Qucik View -
4 Channels Wireless Remote Control 315MHz -Arduino Compatible
₦ 6,000Communicate with Arduino over long distances
- 315MHz operating frequency
- Distance: approx. 50 Meters in open air
- 5V operation
- 4 Control channels
Qucik View -
PICkit 3 + Free Pic – 16F628
₦ 35,000PICkit 3 In-Circuit Debugger/Programmer uses in-circuit debugging logic incorporated into each chip with Flash memory to provide a low-cost hardware debugger and programmer. With the PICkit3, almost any Microchip PIC microcontroller can be programmed and debugged.
Free 16F628 8-bit microcontroller included.
Features
- USB (Full speed 12 Mbits/s interface to host PC)
- Real-time execution
- MPLAB IDE compatible (free copy included)
- Built-in over-voltage/short circuit monitor
- Firmware upgradeable from PC/web download
- Totally enclosed
- Supports low voltage to 2.0 volts (2.0v to 6.0V range)
- Diagnostic LEDs (power, busy, error)
- Read/write program and data memory of microcontroller
- Erase of program memory space with verification
- Freeze-peripherals at breakpoint
- Program up to 512K byte flash with the Programmer-to-Go
- Free 16F628 microcontroller included
Qucik View -
PIC16F628A Microcontroller
₦ 2,00016F Family Midrange Microcontroller with 18 pins delivering up to 4MIPS
- 4MHz internal oscillator
- 2-5.5V Operation
- 1 UART
- PWM
- 224Byte RAM
- 128 Byte EEPROM
- Programmable via ICSP
Qucik View
Reviews
There are no reviews yet.