AC5A Ammeter

5A AC Current Transformer Module

₦ 2,550

This electricity sensor is based on TA12-100 current transformer, which can transform AC signals of large current into small amplitude analog signals.

Category:
Brand:
Tag:

Out of stock

Add to Wishlist

This electricity sensor is based on TA12-100 current transformer, which can transform AC signals of large current into small amplitude analog signals. The maximum current that can be detected can reach 5A, and the detected current signal can be interfaced directly to an Arduino or other microcontroller

Specification: 

 

  • 3 Pin Interface
  • Power Supply:5V 
  • Board Size:30 × 24 × 1.6mm 
  • Weight:25.00g 

 

 

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related Products

  • 0 out of 5

    HB100 Motion Detection Microwave Sensor Module

    ₦ 3,500

    This is a X-Band Bi-Static Doppler transceiver module. This module can be used to detect motion in projects relating to home automation, automatic doors, alarm systems and even vehicle speed detection.

    Feature

    Transmission frequency: 10.525 GHz
    Frequency Setting Accuracy: 3MHz
    Output power (minimum): 13dBm EIRP
    Operating voltage: 5V 0.25V
    Operating Current (CW): 60mA max., 37mA typical
    harmonic emission: <-10dBm
    Pulse mode:
    Averagecurrent (5% DC): 2mA
    Pulse Width (Min.): 5uSec
    load cycles (Min.): 1%

    Buy Now
    Add to Wishlist
    Qucik View
  • 0 out of 5

    LM393 + Free Socket

    ₦ 900

    The LM393 device consist of two independent low voltage comparators designed specifically to operate from a single supply over a wide range of voltages. This device can be used for various comparison based control and sensing projects.

    Features

    • Wide single-supply voltage range or dual supplies: 2 V to 36 V or ±1 V to ±18 V
    • Very low supply current (0.45 mA) independent of supply voltage (1 mW/comparator at 5 V)
    • Low input bias current: 20 nA typ.
    • Low input offset current: ±3 nA typ.
    • Low input offset voltage: ±1 mV typ.
    • Input common-mode voltage range includes ground
    • Low output saturation voltage: 80 mV typ. (Isink  = 4 mA)
    • Differential input voltage range equal to the supply voltage
    • TTL, DTL, ECL, MOS, CMOS compatible outputs

     

     

    Buy Now
    Add to Wishlist
    Qucik View
  • 0 out of 5

    A4988 Stepper Motor Driver Module

    ₦ 3,000

    A4988 is a microstepping stepper motor driver. It drives bipolar stepper motors and has adjustable current limit, over-current and over-temperature protection.

    Key Featues:

      • 8V to 32V Operating voltage
      • 3-5V logic supply
      • Up to 2A output current per coil
      • 5 step resolutions: Full step, 1/2 step, 1/4 step, 1/8 step, 1/16 step
    • Adjustable maximum current output
    Buy Now
    Add to Wishlist
    Qucik View
  • 0 out of 5

    Arduino Double Channel Relay Module 5V/10A

    ₦ 3,500

    This product is a 2-channel relay module board with LED indicators, It can be controlled by microcontrollers such as Arduino, AVR, PIC, ARM any other microcontroller operating at 5V.

    With this relay you can easily control electrical appliances, lights, etc.

    Features

      • Opto-isolated input
      • This relay module is 5V active low.
      • It is an 1-channel relay interface board, which can be controlled directly by a wide range of microcontrollers.
      • It is also able to control various appliances and other equipment with large current.
      • Relay output maximum contact is AC250V 10A and DC30V 10A.
      • Can be connected directly to microcontoller GPIO pins.
    • Working status indicator lights are conducive to the safe use.
    Buy Now
    Add to Wishlist
    Qucik View
  • 3.3V 700mA Isolated Switching
    0 out of 5

    3.3V 700mA Isolated Switching

    ₦ 3,000
    This AC-DC 220VAC 5VDC 700ma isolated power supply module has temperature protection, over current protection and short circuit protection, high and low voltage isolation with
    AC85 ~ 265 v wide voltage input, ac/dc current, 431 precision voltage stability DC5V output
    Small size, stable performance, cost-effective
    Technical Specifications:
    Condition: brand new
    Quantity: 1PCS
    Input voltage: AC 85 ~ 265 v 50/60 hz or DC 100~ 370 v
    Imput current: 0.0273A(AC110V) 0.014A(AC220V)
    Input Inrush Current: 20A
    Output voltage: DC 5V (+ / – 0.2 V)
    Output current 700 mA
    Power 3.5 W
    Operating temperature -20~60 degree
    Relative humidity 40-90%RH
    Output 5V, min current 0a, max current 700mA, peak current: 800mA, output range: 4.8~5.2v, ripple wave: 60mV
    Output power:0-4W(DC current)
    Output efficiency: 80%
    Switch machine overshoot: MAX 10%
    Output voltage rise time: MAX 100MS
    Output over voltage: 4.8-5.2V, recovery: Lock, restart after recovery
    Output over power protection: YES, recovery: Lock, restart after recovery
    Short-circuit protection: YES, automatic recovery after problem solved
    Temperature protection: YES, recovery: Lock, restart after recovery
    Overcurrent protection: YES, recovery: Lock, restart after recovery
    Buy Now
    Add to Wishlist
    Qucik View
  • 0 out of 5

    LM2596 Adjustable Step-Down Power Module With Digital Display

    ₦ 4,500

    This board carries the multipurpose LM2596 power supply and allows you deliver a regulated voltage for any electronic device without the need for soldering or a multimeter. Simply set it and hook it up.  The module displays the output voltage on a built in  seven segment display.

     

    Features

    • 4V-40V Input Voltage.
    • Continuously adjustable output voltage range of 1.25V-37V .
    • Maximum output current up to 3A
    • Switch toggles between viewing output or input voltage.
    • Clear Seven Segment display for showing operating voltages

     

    Buy Now
    Add to Wishlist
    Qucik View