Only logged in customers who have purchased this product may leave a review.
4 Channels Wireless Remote Control 315MHz -Arduino Compatible
₦ 6,000
Communicate with Arduino over long distances
- 315MHz operating frequency
- Distance: approx. 50 Meters in open air
- 5V operation
- 4 Control channels
Related Products
-
PN532 NFC and RFID Reader & Writer Module
₦ 9,000The PN532 is a widely used and supported NFC chip. This module will allow you to add NFC and RFID functionality to your project, allowing you to interact with phones, read and write NFC tags and RFID tags.
Features
- Typical Operating Distance have been updated to 5cm~7cm reading distance
- Work in NFC Mode or RFID reader/writer Mode
- RFID reader/writer supports:
- Mifare 1k, 4k, Ultralight, and DesFire cards
- ISO/IEC 14443-4 cards such as CD97BX, CD light, Desfire, P5CN072 (SMX)
- Innovision Jewel cards such as IRT5001 card
- FeliCa cards such as RCS_860 and RCS_854
- Plug and play, Arduino compatible
- Built in PCB Antenna, with 4cm~6cm communication distance
- On-board level shifter, Standard 5V TTL for I2C and UART, 3.3V TTL SPI
- Work as RFID reader/writer
- Work as 1443-A card or a virtual card
- Exchange data with other NFC devices such as smartphone
Package contains
- 1 PN532 NFC RFID Module
- 1 dupont cable Male-Male
- 1 Mifare S50 White Card
- 1 Mifare One S50 Key Ring
- 1 12P bent header pin
Arduino Library: //github.com/adafruit/Adafruit-PN532
Qucik View -
Adjustable Power Supply Voltage Regulating/Reduction – LM 2596S
₦ 3,000Excellent for powering GSM modules, charging batteries, etc
Input: 3~ 40V; Output 1.25 ~ 35V ( Adjustable)
Max 3A Output Current
Suggest to work within 2.5A for long term use
Configurable to charge different kinds of sealed lead acid batteries.
Configurable to charge mobile phones at 5V with a very smooth output voltage.
Qucik View -
5A DC-DC CC/CV Lithium Charger LED Driver Power Module
₦ 2,500This very utilitarian board delivers constant voltage or constant current output and comes in handy as a battery charger (Lead acid or Lithium battery), LED Constant current driver, as well as other power supply needs. It is also quite chunky -deliverying up to 5A output.
-
- Output voltage: 0.8V-30V
- Input voltage: 5V-32V
- Separately adjustable voltage and current outputs
- Size: 51 * 26.3 * 14 (L * W * H) (mm)
- Operating Temperature: -40 to +85 Degrees
- Voltage Regulation: +/-2.5%
- Load Regulation: +/- 0.5%
- Output ripple: 50mV
- Switching frequency: 300KHz
- Conversion efficiency: 95% (the highest)
- Output current: adjustable maximum 5A
Qucik View -
-
JT308 USB RFID Card Reader
₦ 14,250The PN532 is a widely used and supported NFC chip. This module will allow you to add NFC and RFID functionality to your project, allowing you to interact with phones, read and write NFC tags and RFID tags.
Features
- Typical Operating Distance have been updated to 5cm~7cm reading distance
- Work in NFC Mode or RFID reader/writer Mode
- RFID reader/writer supports:
- Mifare 1k, 4k, Ultralight, and DesFire cards
- ISO/IEC 14443-4 cards such as CD97BX, CD light, Desfire, P5CN072 (SMX)
- Innovision Jewel cards such as IRT5001 card
- FeliCa cards such as RCS_860 and RCS_854
- Plug and play, Arduino compatible
- Built in PCB Antenna, with 4cm~6cm communication distance
- On-board level shifter, Standard 5V TTL for I2C and UART, 3.3V TTL SPI
- Work as RFID reader/writer
- Work as 1443-A card or a virtual card
- Exchange data with other NFC devices such as smartphone
Package contains
- 1 PN532 NFC RFID Module
- 1 dupont cable Male-Male
- 1 Mifare S50 White Card
- 1 Mifare One S50 Key Ring
- 1 12P bent header pin
Arduino Library: //github.com/adafruit/Adafruit-PN532
Qucik View -
LM2596 Adjustable Step-Down Power Module With Digital Display
₦ 4,500This board carries the multipurpose LM2596 power supply and allows you deliver a regulated voltage for any electronic device without the need for soldering or a multimeter. Simply set it and hook it up. The module displays the output voltage on a built in seven segment display.
Features
- 4V-40V Input Voltage.
- Continuously adjustable output voltage range of 1.25V-37V .
- Maximum output current up to 3A
- Switch toggles between viewing output or input voltage.
- Clear Seven Segment display for showing operating voltages
Qucik View -
433MHz RF Transmitter and Receiver Link Kit
₦ 2,000This 433MHz wireless transmitter and reciever kit allows easy data transfer between electronics gadgets built with Arduinos, Microcontrollers, etc
Features
- Operating Voltage: 3V-12V
- Operating current: max 40mA @ 12V min 9mA @3V
- Modulation Scheme ASK /OOK
- 315MHz-433.92MHz
- Transmission power: 25mW
- Frequency error: +150kHz (max)
- Data rate: 10Kbps
Qucik View
Reviews
There are no reviews yet.