3.3V-5V TXS0108E 8 Channel Bidirectional Logic Level Converter
₦ 2,500
This chip allow easy conversion between logic levels allowing easy interfacing of Modules or other integrated circuits to a microcontroller or Arduino system.
- 1.2 V to 3.6 V on A Port and 1.65 to 5.5 V on B Port
- Output Enable Function Using OE pin
- VCCA connects to lower logic level eg 3.3V
- VCCB connects to higher logic level eg 5V
- When Ax has TTL 3.3V input, Bx will get TTL 5V output
- When Bx has TTL 5V input, Ax will get TTL 3.3V output
- NO direction control required
Example applications are Arduino to GSM connections, 3.3V SPI/I2C module connection to 5V system, UART interfacing between systems operating at different voltages
Only logged in customers who have purchased this product may leave a review.
Related Products
-
USB to UART 5- Pin CP2102 Module Serial Converter
₦ 2,500A MUST HAVE FOR EVERY ELECTRONICS AND EMBEDDED SYSTEMS ENGINEER
TALK DIRECTLY TO MICROCONTROLLERS, GSM MODULE, GPS MODULES, BLUETOOTH AND MANY MORE VIA UART/RS232
This is a USB 2.0 to 3.3V TTL UART 5 Pin CP 2102 Module Serial Converter
Connect MCU easily to your computer
Stable and reliable chip set CP2102 USB specifications
2.0 compliant with full-speed 12Mbps
Standard USB type A male and TTL 5 Pin connector
5 pins for TXD RXD GND 3.3V 5V.
All handshaking and modem interface signals.
Baud rate: 300bps to 1.5 Mbps.
Byte receive buffer: 640 byte transmit buffer.
Hardware or X-On/X-Off handshaking support.
Event character support Line break transmission.
USB suspend states supported via SUSPEND pins.
Temperature Range : -40 to + 85
Supports windows 98, Vista, Mac OS 9, Mac OS X & Linux 2.40
Qucik View -
USB to RS-485 Converter
₦ 3,000The USB-RS-485 Converter allows you to interface and debug RS-485 devices from any terminal application or terminal application.
Features:
- No need external power, USB powered
- USB 2.0 plug and play compliant
- USB CH340 chip
- Support System: Windows XP , Vista, Windows 7 , Linux , MacOS , and WinCE5.0 support
- Supports baud rate range : 75bps – 115200bps , up to 6Mbps
- Communication distance :1200m(max)
Qucik View -
Raspberry Pi Micro HDMI To HDMI Cable – 1.5M
₦ 5,000HDMI To HDMI Cable 1.5 Meters High Quality 4K@60 Full HD support
HDMI (High-Definition Multimedia Interface) is a compact audio/video interface for transferring uncompressed video data and compressed/uncompressed digital audio data from a HDMI-compliant device (“the source device”) to a compatible computer monitor, video projector, digital television, or digital audio device etc. HDMI is a digital replacement for existing analog video standards. some more features of HDMI cable are :
High speed data transfer.
No any software requirement.
Undermould shield helps to prevent radio frequency and 2 elector magnetic interference.
Support for 1.4 V display technologies.
Gold plated copper cntacts provide maximum conductivity and minimizes data loss.
Connectors: HDMI M TO M.
No external power requirements.
Transfer Digital Audio & Video signals at warp speed of 10.2 Gigabytes per second.
HDMI to HDMI cable is suitable for use in HDTV, Home Theater, DVD player, projector, PS3, XBox, Audio/video receiver, LCD Display and other HDMI devices .
Length – 1.5M
Qucik View -
LM2596 Adjustable Step-Down Power Module With Digital Display
₦ 4,500This board carries the multipurpose LM2596 power supply and allows you deliver a regulated voltage for any electronic device without the need for soldering or a multimeter. Simply set it and hook it up. The module displays the output voltage on a built in seven segment display.
Features
- 4V-40V Input Voltage.
- Continuously adjustable output voltage range of 1.25V-37V .
- Maximum output current up to 3A
- Switch toggles between viewing output or input voltage.
- Clear Seven Segment display for showing operating voltages
Qucik View -
MAX3485 TTL To RS485 Module
₦ 3,750This RS485 to TTL Module allows you to communicate to an RS-485 device, module or another microcontroller at over 1Mbps from over 1km away! This RS485 transciever can be easily interfaced to a microcontroller or Arduino
- Uses MAX485 integrated circuit
- Pinout DI,DE,RE,RD signals
- 5 Volt Operation
Qucik View -
FT232 FTDI To TTL Serial Adapter
₦ 3,000A low-cost way to add USB capability to for Arduino or other microcontrollers. Use this for boot loading or uploading Arduino sketches with ease
- Can program Arduino mini, Pro Mini, Lily Pad and other Arduino devices without pinout.
- Working voltage: 3.3V/5V
- Chip: FT232RL
- Over current protection with 500 mA fuse
Qucik View
4 Phase Stepper Motor - 5V + Driver
Reviews
There are no reviews yet.